2nd gen can am one way bearing remove and install

2014 can am renegade 1000 one way bearing

[@xXlBlazeXx]

i springs go in first and the caps go on top of the springs then push and hold them in and slide the sleeve on turn it till u hear a click

[@xXlBlazeXx]

it helped for easier shifting and if ure bike moves without hitting the gas if ure in gear

[@kelvenguard]

Thanks My Bearings are heated and welded to the shaft... MUST BE

[@paulcarpenter7429]

Great video. Thanks

[@alenbegonja418]

Thanku.Did it help for easier shifting?which way do the springs go in cup side first or ?

[@nathanhladky]

What is torque spec for reassembly?

[@junior95601]

Thank you

[@JuanRamirez-dv4ou]

I took mine off n discovered it was missing those two springs n lil pins...what should I do....

[@xXlBlazeXx]

need to get ahold of them probably haft to get another bearing to get them... not sure if they sell them separately

[@alenbegonja418]

Any greasing needed

[@xXlBlazeXx]

the bearing is pretty sealed and pre-greased should not haft to but im sure it wouldnt hurt if ure a grease monkey just remember it gets hot in there

[@youfixitatvutv]

Yes. He did not grease. It takes kluber isoflex 52. His is gonna wear out in no time.

[@kelvenguard]

@@youfixitatvutv My New Factory Bearings from CAN-AM dealer have a white/clear grease in them... Looked like NO grease until I opened the package and rolled the bearing

[@user-yi8pf8on6w]

is 2009 considered 2nd gen?

[@xXlBlazeXx]

No 2012 and up is 2nd gen

[@user-yi8pf8on6w]

@@xXlBlazeXx thanks!