Junky Boat Washed Up... Will It Run?
Vložit
- čas přidán 25. 07. 2024
- A friend asked me if I could remove this Abandoned boat/trailer that washed up on their property from a flood a few months back. Here's how that went. Will it run!?
~PART 2: • The TRASHLINER Boat Pa...
~VIDEOS OF LEO / HIS STORY: • Leo The Squirrel Updat...
`
Thanks so much for watching and I hugely appreciate any channel support. Thank you!
~NNKH Instagram: / nononsenseknowhow
~My 2nd Channel For Everything Else (RNoNonsenseKnowHow): / @nnkh2
~Shop on Amazon Here: amzn.to/2uDE6eT
*I get a small commission on any purchases made through the Amazon affiliate links on this page. Doesn't cost you any extra and helps me to continue producing content. Thanks!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Other AWESOME Channels You Should Check Out:
~Andrew Camarata: / @andrewcamarata
~DownstaterADV: / @downstateradv
~Mustie1: / mustie1
~Humble Mechanic: / humblemechanic
~Essential Craftsman: / @essentialcraftsman
~EricTheCarGuy: / ericthecarguy - Auta a dopravní prostředky
People don't understand the amount of hard work and time this man is putting into our entertainment, thanks bro. I just found your channel yesterday with ypur newest video recommended to me out of the blue. Also, one part of this video brought back some vivid memories of my ex girlfriend, any guesses? lol
Hey man, thanks so much for checking out the videos and yeah they definitely take a lot of time and effort to make that's for sure. Greatly appreciate you leaving a comment. And my guess would be you took your ex-girlfriend out and the boat broke down or ran like junk?
@@NoNonsenseKnowHow I'm actually binge watching you now bro. I literally found ypur channel in recommendations. I watched the new jet boat obviously, then the trashliner series, now I'm on part three of the air boat. Definitely going to subscribe now. The amount of work ypur putting into these videos is insane. I will definitely share with my buddies. I love doing the same kind of stuff, from helping little animals to cleaning up fishing spots and rebuilding old stuff to enjoy. The thing that reminded me of my ex girlfriend was when you were draining the water put of the drain hole ........lmao, sorry for the mental picture...haha.
Thanks again for all your hard work and dedication.
I just found his videos, he reminds me so much of my cousin, then I found out he’s a couple towns away from where my family is from .
😮suzukldr25
YAMAHAdr15vs
OMC Cobra.... OMC dumped an absolutely insane amount of R&D into that outdrive, gimble housing, tilt trim and the shift interrupt, they almost lived, they got the contract with Bayliner but didn't make enough in other sales to stay afloat, they were holding on by a thread for years and finely sold out to Volvo / Penta and that very outdrive is an incredible success, renamed the SX. Anyway, to say that parts for that outdrive are discontinued is a bit of an over statement, in tact and ready for service, it will easily fetch 1500 dollars. the 4 banger is an Iron Duke, they still use those in boats, forklifts, generators and cars, they are inexpensive long lasting little engines with a decent amount of torque. The boat was a POS the day it was made, everything about it is the cheapest available. Surprisingly enough this had the benefit of lightening up the hull by a about 30% of it's leading competitors .... God, i'm so ashamed that i know so much about these boats
We Called them Baysinker around here lol. Buddy had one with a Force Outboard and the first time I went out with him it blew the head gasket. Went thru the engine for him and the engine ran good for years even with a dead choke solenoid would fire up everytime for years
BIL had one and it ran for years with normal maintenance. If I could find one now I'd buy one in a minute.
all your knowledge about this wonderful piece of craftmanship makes for a great comment though lol
Here is “One Guy” who gets the job done!👍👍👍
Agreed
You deserve every follower you have Chris! I like watching your videos a lot, thank you for working hard to make them
I don't know if he got the 50,000 views in the first seven days he said were needed to make him spend money on the boat to make it run or not. But he sure surpassed that mark now!! LOL. As of a little less than a year later it's at 776,805 views!!! Right on NNKH!! You're Awesome!
Yeah pretty crazy how many views this ended up getting.
Good video. There is something so satisfying about putting a new, clean sets of wheels and tires on an old trailer. Gives me motivation to get back to work on the broken boat that I shouldn’t have brought home either. Haha.
I don't know about the east coast but here on the west coast these boats readily available for anyone who wants to put in a little elbow grease. I've been fortunate enough enough to break even by buying them and refurbishing them
Good stuff. I have the same engine and it's nice to see it opened up.
Regretting bringing home "junk" cracked me up.
Sometimes I'm like..."why do I do this to myself"
Lol, yeah this thing's an ugly sight in the backyard.
If we keep it, what shall we name her? The Trashliner? Lol
Treeliner 5000
Obviously
Trashy McTrash Boat
Bottom of the Bay
This squirrel is so nice. I didn’t think you could pet one. This is fresh.
Your like the New England version of a bush mechanic. It’s a term for the gnarly northern Australian people who do anything to fix a vehicle. Makes for very entertaining content!
Cuteness over load with the squirrel, he’s lovely.
He really is! I hope he sticks around and continues being a little garage helper squirrel
I admire you're not afraid of some hard work. It's becoming more and more rare nowadays. Got my respect for sure bud!
Thanks man.
Stole the words right out my head
Yeah but is it worth it I mean this boat even fixed up can't be worth what you will have to put into it to get it running.
Chris that there is a true statement.
@@DanielJones-nv3my Thanks 🍻
The hull looks good , the iron duke will never wear out . Just the glass on that thing is 300 to500 bucks . I would strip it down and build the interior .
Love the boat videos. Amazing stuff to watch!
Looks like a 3510 starter. You can probably get one at a junkyard for $15.00. You might even have one laying around. Came on tons of GM products from the late '60s to the late '80s.
I was gonna say it looked like a BBC starter.
That is the good thing when you are a bad ass mechanic. People and insurances company throw things up because they don't want to deal with them and you can come, fix them, keep them and re-sale it ..
I’d yank the engine and out drive , steering cable and wheel and switches and cut the boat up but keep the trailer also ! Basically strip it so another boat may live ! Haha 😂
OMG i wish we had squirrels here in Australia .... i so love them
I love this content ❤ I'm really excited to see more videos just like this! 😃 Subbed!!!
Leo is looking healthy!!! That boat not so much but hey for free you really can’t go wrong regardless of what you do with it. Thanks for sharing. Would be cool to see if it would actually fire👍🏻
Yeah he's been packing some weight on for winter! I hope he makes it through the cold season. And no problem, thanks for checking it out. Probably end up doing a part two to see if it will run. Going to be a smoky mess I'm sure if it does
I bought an 88 bayliner Capri that needs a new exhaust manifold and manifold elbow riser cause there’s a water leaks where the gaskets are between the two. Looking forward to getting her back up to par though, 120hpf on the water would be great this upcoming summer🤙🏾
Heck yeah man sounds like a plan
these are my favorite types of videos! good stuff man
Sweet! And thanks
For a rust locked engine, or one that has rust in a cylinder, before trying to start it, put some white vinegar in the cylinders, let it sit for 30-45 minutes and usually will unfreeze and as the vinegar dissolves the rust, helps free rust stuck piston rings, and gets a lot of the rust out of the cylinders, gives your rings a better chance after an oil/fuel mix startup.
try it, use an engine you thought was so rust stuck it would need disassembly to repair, then you can really see how well it works. might leave it in that type of stuck engine an hour or 2, even overnight.
Great tip for sure. I use vinegar to clean gas tanks a lot. This one wasn't locked up too hard though
Love project s like this 💯 👌
Gotta love those 2.2 engines! I have one in my 3/4 NASCAR
hihi squirrel steals the show so cute
All that's left of that boat is the hull, engine and some of the instruments may be okay. The wood inside the transom may even be rotted out and need to be dug out from the inside, then re-glassed. All the flooring and other interior structures have to built from scratch. Huge job. I rebuilt a 17' Sunbird, another OMC boat. Not as far gone as that one, but it had stuff growing out of the carpet also. I was lucky it had an outboard, in good shape on mine. But that inline 4 may be okay also if it will run.
Very good work on the “trash liner
I have built boats for 14 years between several companies: Seminole Marine (Sailfish and Southwind boats) Edgewater Power Boats, Brunswick (Sea Ray line) and everglades. I would love to find some of these freebies you have or at least one to restore. Kudos to your efforts and work.
You anywhere near Pennsylvania? I would gift this boat to you if you had plans to restore it. I mean I really don't think an old bay liner like this is worth the effort. Probably worth it to get something way more unique.
Sadly no I am in central Florida. Lived in Hershey for 2 years but back home where no snow is a go.
Great job .
I say make a u pull it run for a similar starter that will bolt up and video tape it. People will like seeing the junk yard and the search for good parts. It’s kinda like hunting for rusty treasures. Lol. If it runs then strip the interior and sell it as a project. Or it could be called dumpster fire and you keep it for river exploring.
Look up under the manifolds for a crack in the side of the block before going any further. That's where those motors cracked when they froze with with water in them
I like it. Thanks for this clip!
Tá aí um canal que assisto mesmo sem fala inglês mas te distrai do começo ao fim se vira corre atrás ,essa veio da enchente, restauro raiz .
OMG that’s my boat! I was out of the country and thought it was stolen! I never had it registered in my name so they couldn’t locate it
no way, was it really? Was it registered to someone else or you don't need a name for a boat trailer/boat in PA?
So happy to see a new video come up! I love your videos dude! I just bought a box of cookies from Wawa so I know what I’m doing later!
Lol. Hell yeah, sounds like a good time. I greatly appreciate the support. Thank you.
You should do a video on what to look for on a jet ski
The first 6 minutes or so were pretty satisfying.
Thanks for the feedback.
New driver .
Lol dang near took out that stump
~PART 2: czcams.com/video/0kP3DLnlBMU/video.html
NNKH Hats/Merch: czcams.com/channels/YAcr-u-BLGIrtUImT2_Elw.htmlstore
Have you checked out Marty T's awesome CZcams channel? czcams.com/users/MartyT
@@My_Op ĢVVVV
Thanks alot
We need to see it try to start
You near Washington state. You can have mine. 72 I think Chrysler crown sport try hull p.o.s. 2000 mercury 150. Oh wait P.A. Oh geez
Yesss another boat restoration
Lol
I like the squirrel hanging out while you work..
Fun video!
got mine for $250.00 bucks every one said these are trash ! ;[ I still have it its been 7 years since I got it very easy to maintain I'm very happy with it .
thanks for teaching us mecanic
Nice job Chris!
Thanks mad Murdock
Fun to watch
It just amazes me how you beat the crap out of your Toyota and it just keeps on tickin'.
You're lucky those cables didn't come back into the windshield when it broke off trying to get this boat out. Wow
There wasn't a lot of line out. That's more a problem when you have many feet of line out. Plus I had my head down beneath the dash when I reversed
100% we want to see you do the impossible. Dam right I want a part 2.
Absolutely loving your content also learning alot
Awesome to hear that and thanks so much for tuning in
You’ll get it! You always do.
kinetic ropes are the bees knees lol saved me many times
Good work man , i am extremely motivated
Thanks for getting it out of our yard!!!
No problem! Good luck with the house sale
We had one of these. It was an 1988 or 89. I can't remember. It had the 3.0L 4cyl. Something like 135hp (I think). Ours ran great and we never had a problem with it. But we took care of it and never left it out in the elements. Only thing we hated about it that I can remember is that it was loud as hell. We sold it about 7yrs later and aside from a little UV fading of the dash it looked and ran great.
Very cool 👍🏻
old trailers and boats are fragile, gentle pull will save from extra work. But I guess whatever is left of that boat is in good use.
The boat that thought it was a submarine!
Yeaay LeO!! shout out from Scandinavia
Master!Much greting from Serbia!
Oh man....that Kawasaki! Sweet 😋
LEO IS KING !!
Bayliner,s make the best flower pots. You can find these everywhere mostly used for garbage cans after they stop running which in most cases is relatively quickly do to owner lack of maintenance after the first season. What I love here in Michigan is the high school graduates that post the trailer for sale but you have to take the boat, which costs about $50 bucks per ton to dispose of. But usually the trailers are in no better condition because the were mass produced, cheap with a short life span especially if you didn't invest in a quality cover to keep the water out. LMAO. I restored a 1987 Chaparral villain ll only because they are still sought after. Cost a lot, broke even, won't do it again because I Hate Hate Hate fiberglass work. And it has to be done right.
Sweet!! I see the baby squirrels growing up pretty big! Love you channel dude you're pretty awesome!
Yeah man he's doing great! And thanks
dude , that's my boat !!!🤣 olny kidding
Yes I'd like to see a part two on the boat.
Wow this gives me hope to get my seadoo boat going that's been sitting for a few years. That thing was really rough lol
Those old Sea-Doos can be pretty problematic when they sit for a long time. I had a Challenger 1800 a while back and after taking apart the engines, they had so much corrosion they were basically junk
@@NoNonsenseKnowHow I'm lucky as it has a rebuilt crate motor that we put in like 5 years ago. Just needs some good tlc and re wrap the seats. Me and my old man had to put a new magneto/stater(?) In it cause it wasn't holding a charge. Buy the past few seasons just haven't had the time. That's why I loved grabbing that jetski as I've been able to have a little fun!
Oh got you, yeah you should be good then!
I had this exact same boat. Those motors are nothing but problems. Gas is 2 days old and it doesn't want to run properly. Use it as a reef marker
Get the starter!!! You'll then have 2 swamped motors running again. Doooo it!!!
Beautiful to see a Kwaka LTD sitting there in your garage !!!!!
Ah another boat, the Bayliner2000, probably sitting in the woods with rusted engine since 1982 :D .... Unfortunately this boat cannot be saved, but maybe there is at least a limited edition David Hasselhoff cassette in a tape player somewhere in the cockpit that can be salvaged and sold on eBay. And Leo is already waiting full of curiosity what the next barnfind (or forest treasure) will be. I am jealous of this tame squirrel - it is so cute!
Go for it
Hoping for part 2
What did you do? Love it. Been there, done that. Great video.
Good work on your “trash liner”. I am in need of aOMC 3.0 carb. Do not matter if it works, 2 jet rodChester. Let me know,
No, I just need the outside linkage.
Dude! I’m impressed!! You are not afraid of a challenge.
I wouldn't say that. Nothing to lose, tinking around with this old junker. You're the guy taking on big challenges working on high-end stuff! Incredible work you do
@@NoNonsenseKnowHow thanks man! Sometimes I think I’m just a glutton for punishment.
You certainly are!
Leo is so cute!!!
Yea. Come visit him sometime
after seeing your vid I would have let the local council pick it up for disposal. I know Its sounds harsh but that Sir is life.
Honestly. Walk away when you see OMC the outboard. I do appreciate the effort and Leo
Another option based on what you said. If everyone wants to see a part 2?, Then let them chip in and pay for the starter. Me included
When you get enough money, ya buy the starter. Just a thought.
Shes got the FRAM!!!!
We need more of Leo
Glad I found this channel. 😬
Awesome
Harvest any usable brightwork, and maybe a few other items, then take a sawzall to the remaining mulch. Maybe the trailer can be salvaged. The boat is not even suitable as a planter. Been there, done that.
Why didn't yours work as a planter? I don't see why it wouldn't be able to be used for that. Or maybe even a hot tub
i suspect the boat looked like that long before the flood that washed it up.
Love the earthquake air ratchet !
Nice
Those starters always failed and the replacement could not get wet in a boat lol!
Leo is living the life! Great job with the video. We can't wait for your next one!
Yeah he is! And thanks. I appreciate your support
Nice! let's see me more!
That's all I bring home is junk! Get the starter, for our sake, we can get alot of people to pitch in 5 bucks for the starter and a big can of wax! Fan in Florida.
It would have been good to see part2.😊
There's a part two and three on the channel
Nooooo!!!! We want to see the Trashliner live! I will send u a starter, cap, rotor and plugs.
Theres a part 2 3 and 4
Gloves bro, Gloves!
When?
Just checking back in want to see that 50k!!!!
Very good at all times and the other one was..