How to Install a Boiling Water Tap - Step by Step Guide
Vložit
- čas přidán 30. 06. 2024
- Welcome to my latest plumbing guide video where i will be showing you how to install a boiling water kitchen tap. I will show you step by step how to install the boiling water tap and boiler unit in your kitchen. If you like the content leave a like and please subscribe for more content like this as I've got a lot more to come and there will be something that will help you out.
Link to the tap used in the video - www.victorianplumbing.co.uk/p...
► BECOME A MEMBER OF THE DIY CLUB Click! 👇🏼
/ thediyguy1
► Get FULL access to the Discord Group and other perks!
Follow me on Instagram 👉 the_diy_guy_youtube
Thanks for watching The DIY Guy. My mission is to bring you the best Tips, Tutorials and Tools to help you learn and save money.
Please be advised that this is only a guide which is intended for informational, educational and entertainment purposes and The DIY Guy cannot accept responsibility for any work undertaken. Be safe and have fun! The DIY Guy may earn affiliate commission if you purchase via the recommended links. These links will not cost you any extra.
Thank you! I just installed and plumbed up my new hot water tap myself. I was worried I would have to call my Dad for help, but thankfully it was fairly straight forward.
My plumber wanted a Grand to replace an already fitted (but leaking) hot water appliance. After watching this video I decided to buy a new one online for £200 and fit it myself. Took all of 15 minutes.
Cheers bud! You saved me £800. Feel like I should get you a pint or something.
Your welcome! Thanks for the pint haha
Absolutely amazing clear instructions, I know I can do it as an amateur when I follow your instructions.. keep up the good work..so far watched every video of yours 10/10
Brilliant. Very clear explanation. Took one hour start to finish after watching video. Did what you suggested and dumped the plastic tap support. Impossible to get that clamp on and as a precaution reinforced it with a cable tie that held the white plastic filter pipe. Thank you again
Awesome! I was in doubt about how to install the plastic tube to the filter and you showed me what I needed to see. Thank you!
Very interesting video. Again, well explained. Didnt realise how easy it was to get these taps fitted.
Thanks. Most people think they are difficult but they really aren't.
According to you, it is very easy to install on of these units. Thank you.
Exccellent video, thank you.
The product instruction page with 4 small pictures was clearly not enough for change of the kitchen tap.
I followed the video step by step, and completed the project in no time!
Glad it was helpful for you
I've often thought about the boiler taps and cooker taps. But with those type of plastic sings I thought you would have to have a pot sink? But all your videos are excellent. Learnt so much just by following you !! and watching them.. Thanks for your advice 👍
Great Guide, ill share this with all our customer who purchase one of our boiling water kitchen taps.
👍
Super easy to follow! Saves me the £150 a plumber wanted 😮
That's what this channel is all about
Excellent - clear and concise instructions along with an excellent video.
In relation to the plumbing aspect I have a blue and black tap on the plumbing. Which is for hot and cold water. Great video by the way
Another great video, will be added to my plumbing playlist 👌
Thanks. Do it 👍
Making it look so easy, once again. Excellent video
Thanks 👍
Now I understand! An excellent and clearly presented video. Thanks!
Glad you like it
Great video as always. Thanks for the content.
Your very welcome 👍
Had the same tap installed for 2 years, I wouldn’t be without it. About an hour to install.
Couple of tips if you have a power cut the unit by default turns off so would need to manually turn back on.
Defo don’t over tighten the nuts on top or they will leak as explained in video.
Great video great tap
👍
Thanks for the feedback.
How do you find its efficiency? Having the tank of hot water under the sink - is it well insulated?
Hi,my hot water has stopped flowing out of the tap but cold and boiling still running as is all taps in the rest of the house,any idea wot the problem is, also does the end of the top unscrew myself and daughter have both tried,thanks in advance 😊
Your video helped me to fit this exact tap today, thanks for another great video. Can’t believe how easy you made some of those bits look… putting that clip on the hose almost cost me my sanity… Thanks again!
Your very welcome 👍
I did that without the video about 9m ago and to this day I wake up at night dreaming about that clip...
Where I can get that filter cartridge from?
Excellent work. I'm learning a lot from your videos.
Awesome, thank you!
Thanks. Great clear explanation. Will be trying it this week
Glad it was helpful! Thanks👍
Great video you made it look easy.
Thanks 👍
Great video. Haven't bought one yet but just about to now!
👍
Really helpful. Thanks
Really well made video that was super helpful and informative.
Glad it was helpful!
Brilliantly explained
Thanks 👍
Excellent video....thank you
Thanks and your welcome 👍
A great video...fitting this exact tap...instructions are poor to say the least...you made this so much easier.
Glad you found it useful
Fantastic! You’ve convinced me to get one😎 I have a slight problem however, there isn’t a power socket in my sink base unit😬
Excellent job very professional
Thank you very much!
Nice one man saved me lots of money 🎉
Glad of that
That looks very easy, thanks
Your welcome 👍
Hi, must connect the filter pipes according to the direction marked on the top of filter housing 😊
Excellent video as always, very informative and easy to follow. I did consider getting something similar myself, but then realised that I have a plumbed in espresso machine with hot water outlet on it and figured I didn’t actually need a separate boiling water tap 🤔🙈. Keep up the great work 👍🏻. Could you do a follow up video at some point by any chance to cover how cost effective having one is ?
Thanks a lot. Good point. I'll see what I can do 🤗
@@TheDIYGuy1 Perfect thanks buddy 👍🏻
Excellent mate😊
I've recently had one of the Quooker taps fitted. I was a bit concerned about the running costs of keeping water constantly available on the boil. After doing some monitoring with it connected to a smart socket I can see that the unit consumes about 210 watts in a 24 hour period when not in use (UK in September, ambient temperature around 19 degrees Celsius). This works out around £23 per year but I reckon that I'll easily save that in energy that hasn't been used when people overfill the kettle.
I was thinking of getting one of those, and that makes the installation look so simple. What's putting me off now though is I didn't realise they take up so much room in the cupboard under the sink. I have a small kitchen, and storage space is at a premium.
I've recently had one of the Quooker taps fitted. I was a bit concerned about the running costs of keeping water constantly available on the boil. After doing some monitoring with it connected to a smart socket I can see that the unit consumes about 210 watts in a 24 hour period when not in use (UK in September, ambient temperature around 19 degrees Celsius). This works out around £23 per year but I reckon that I'll easily save that in energy that hasn't been used when people overfill the kettle.
Great bit of kit and very convenient, I would definitely recommend .
Great video, thanks 👍
Thanks for sharing that! 👍
Very well explained, thanks. What if there's already a water softener system, with carbon filter, installed under sink?
When I went to fit my tap (same brand) there were no instructions to indicate which tail pipe went where. Your video was really helpful from start to finish. Thanks for posting this.
You're welcome! Thanks!
Just installed this today and followed the guide, fantastic and much easier than anticipated. Thanks!
One thing to note which may be a slight model update - my water filter fitting on the boiler (blue one) was pre installed however it wasn't tight enough and caused a small leak when turning the water on so would recommend removing and re tightening yourself if yours is the same!
How long is the mains cable ?
Thank you!
You're welcome!
Brilliant video, as a result of which I ordered up the kit from Victorian Plumbing. The video made it all so much clearer and was easy to follow. However, I'm struggling to get the block tight enough to stop the it moving when we use the tap. The work surface is granite. Is there an adhesive I could use for extra grip between the block and the top?
nice film very helpful
Thanks 👍
Thank you
You're welcome
the job is vere nice thank you
Thanks
I followed the tutorial almost to the letter (a few tweaks to suit the fittings in my kitchen) biggest panic was priming the boiler, 90 seconds felt much, much, much longer!
All fantastically straightforward. Thanks for making this chore a breeze. Fancy a cuppa?
Glad it helped!
When the filter replacement is due, does it automatically shut off the water supply or should you turn it off at the shut-off valve or stop-cock?
Really clear instructions thank you. I wondered- can you use one of these taps as a regular tap, without the boiler? We're doing our kitchen and would like to install one, but as they are so expensive, I was hoping I could install the tap to work normally until we can save up for the boiler? Any advice on doing this would be greatly appreciated.
Brilliant video! I was wondering if you sell the fittings or do you know where you can pick them all up from? I'm missing the same fittings kit but have the same taps and filter. The tank is a different model but has the same fittings.
Amazing video looking at these now but what is the running cost like vs a kettle "only when you need" ps your videos are extremely clear and very informative great job
Really nice video, thank you! I’m confident I can install myself now. I’m also installing a plumbed fridge at the same time which will live 4m from the sink. Would it be possible to tee off in the thin white pipe between the filter and the tank to take off to the fridge? This way I could use the filter for the dispenser as well as the tap. Basically what I’m asking is is it pressurised? Thank you! 🙏
Great video thanks for the advice. Can you fit these to a sink that only has a cold water feed??? Cheers
Used your instructions to install mine. Very helpful!
I need to remove it now. Is it straight forward or do I need to empty the tank??
Thanks
Any time
Great video quick question.is it possible to go directly into the boiler with p tube as I already have a filtered system cheers
Thanks for the tutorial! Does this use extra energy heating the water vs a conventional kettle?
I’ve got one of these witch is almost identical to this one. It’s from Varena and it’s a Handstrom branded 4 in 1 hot water tap. So the issue I have is that I’ve changed the filter after 6 months following the guidelines on the manual. I have primed the hot water and made sure everything was followed in the manual. Now all I get is the flashing light to say the water is heating up but it doesn’t heat the water at all.
Do you still need to buy filters if you already have a whole house water softner? Great video.
Great video I’ve not long installed mine but found the push fit into the filter as started leaking, do you know how I can fix this ?would appreciate any info as I’ve looked everywhere for help but can’t find anything.
Thanks Tony
Great video again mate smash the likes ppl
Thanks a lot 👍👍
Great video. I purchased an Insinkerator hot water with filter, but it did not come with the white plastic adapter you show to use on the faucet end with metal components to the filter tubing. Do you know what it is called and where I could find it? I have no way of connecting the tubing on the filter outlet to the faucet end.
Another great video, they are so engaging.
To access boiling water was there a button the the tap?
Thanks a lot 😀. There is a button on there.
Great video. I recently fitted an eBay sourced Etal tap and found a few issues. The ring that sits on the sink didn't fit properly into the tap body. The boiling water tap was very awkward to turn, in that I felt the return mechanism was very strong and button you press quite sharp. Biggest issue was when the boiling water tap was turned off the water continued to flow for 20 seconds. Even after following the troubleshooting procedures. Needless to say it got sent back. Not sure if it was a copy of just a dud.
Very well explained 👏. I've got to fit one for my daughter next week, so this video will be a big help. Thanks and subscribe 😘
Glad it was helpful! Thanks for subbing
Have you done a video to describe how to stop a leaking tap? My tap has a fairly constant drip and if it was a normal tap, I would just change the washer. Not sure how to do that on this set-up? Thanks.
thanks excellent instructions. Just a quick question, can this tap dispense cold drinking water when needed?
Cold water yes but not filtered water.
Great video this may sound a silly question but can these be installed on gravity fed system aswell as combi boiler system just wondering with flow rate
Yes they are fine on gravity fed.
Bought this exact tap because of this video and followed this guide. This video explains everything needed perfectly and was relatively easy to fit.
Only issue I had was the cold flexihose wasn't long enough, but a quick trip to screwfix for an extension fixed that.
The tap works perfectly and is good quality and took around an hour to fit (factoring in rechecking everything for leaks)
Glad it helped!
can you use one of these to wash the dishes as well? how fast does the water come out there's very little info about the wattage these things use or how much water they store and if they need an expansion vessel can you help in any way?
@DIY Guy how can you tighten the locking nut with that plastic sleeve if, unlike this video, you can't get your hand up there to fully grip it in the way you have? Is there a tool you can use? Thank!
Great video, thanks! Is that the fastest the boiling water comes out of the tap?
Yes it is. It's actually plenty fast enough although may not look it on camera
Can you use one of these with only a cold water supply as a replacement for an old wall water heater of about 70y old. Would of course get a plumber. Btw. Easy instruction for people with hot and cold water feed 🙏🙏
Great video... Any chance of listing where you got the tap from
Victorian plumbing. The link is in the video description
كاين معلم
Very good video
Can you explain why the black box is leaking
What to I need to do ?
Thanks. Locate your leak and go from there is my suggestion.
Can I put my cold water supply strat to the tank as I don't have eny pluming
Great video. One question though, my cold water pipe has my dishwasher connected to it. Does this matter?
You’d probably want a non-return valve from the dishwasher so nothing can back up into the water heater.
hi, i know this question has nothing to do with this video, but what would be the best way to replace taps that has limescale on the backnuts that is connected to plastic piping, i work in a hospital as my new job and most of the piping is plastic, so when going to either fix a leak or change taps trying to get the backnut off is quite difficult as i dont want to crack the plastic piping.
Hi, my hot water has low pressure, but y cold water is high. Does the heater only use the cold water to supply the heater unit ?
ive got one question i have is can i filter the cold supply to the system. as this tap is replacing a water filter tap. I dont need the tap as a sink filler etc its only for the boiling water and cold drinking water. I assume I can , however my filter for the cold is also the small pu pipe. Ive plenty of pressure, but this would reduce the flow a bit. Assuming the boiler works on pressure and. not dependent on flow i guess im ok ? Basically, i want to use the existing BWT cold water filter going to the existing drinking tap to supply the system. what does everyone think. ?
Would love to know how to remove the water tank so it can be replaced please.
Hi! How long is the plug? Our nearest plug suitable is around 1.5 meters away
So, the hot water tap still brings hot water from the house boiler, then reheats it to a boiling temperature? That’s adding expense too, of course. Could this boiler not be fed from the cold tap instead, using a separate third tap at the sink?
The boiler is fed from the mains cold in this video.
👌
Cheers Ross
Watched with interest, do these devices save on energy?
I've no evidence to suggest yes or no
Do you get filtered cold water , from this tap?
I did not realise they ran with feed from the tap. So when you turn on the tap for boiling water you are actually turning on the feed to the unit.
If anyone is fitting it in a new sink then plumb in the tap and tails before you fit the sink in the hole.
Great video! Is there a way to turn off the child safety lock mechanism and if so, how? Thanks in advance
Not that I know of thanks
Hi,can u tell me please that cold water is going through filter or only i water going to the tank is going through filter,
Does it save much money than boiling a kettle each time?
See my comment above. These are marketed as a fancy new style of “tap”, or “electric tap”, or “instantaneous water heating tap”. They are nothing of the sort. What they are is a normal tap connected to a small electric water heater, a glorified electric shower. So yes, just boil your kettle, these electric water heaters aren’t cheap and generally you’ll be lucky to get much more than 5-6 years out of them, and that’s in a soft water area. Kettles, cheap as chips and just as effective.
Filters are £50 for two, and they need changing latest every 6 months, every 3 if it’s a hard water area etc and they’re getting scaled up. Scale is formed at the hottest point, which is always the boiler, hence the filters. The heater itself isn’t listed as a spare, probably because when it packs up it’d be cheaper just to spend another £300 on the whole lot. And bear in mind, these Bower Palma ones are the dirt cheap end of the market, there’s only so much reliability you can expect.
Having said all that, there’s absolutely nothing wrong with the principle of an instant water heater for your hot taps, in a smaller property, sink in the kitchen and basin in the bathroom, so one upstairs and one downstairs, but you’ll need the wiring in place already, which no one will have in the bathroom, and most people won’t have below the kitchen sink. So bear that in mind as an extra cost, and Heatrae Sadia are about the best of the bunch. They’re a UK firm, parts are readily available, unlike most of the tap variants. Good luck getting parts and repairing those heaters.
Hello you probably wont get this as you done this a while ago i have just bought this but we have a missing part could you tell me the name and size of the metal fixing that goes on the red fitting on top of tamk we do not have that i have messaged excel but no reply as of yet thank you
What model is the one you fitted ?
Hi what system are you installing please
I don't understand stnh the boiler receives water through the filter , and that water to top up the boiler unit comes through the tap itself right?
had me fooled it being so easy, until I thought about the power, I have never lived in a house with a plug outlet in the cupboard under the sink .... Oh well maybe not just yet then..
How much does it cost to run 🤔 specially with electricity prices going up... this is on 24/7 so is it wasting electricity for example a kettle would come on and off this however I believe is powered on keeping the water warm?
I don't have cost data yet I'm afraid
It's not cheaper than kettle, anyone that tells you otherwise is an idiot.
They however pretty cool and more convenient.
they are cheaper than a kettle , if u get a quooker one they’re very cost effecient
What make is this? Would you recommend this make?
in your opinion what brand is the best ? qettle,quooker or intu?
That's dependant on your needs and budget. The pricing is very different.
Does anyone know if you still need a filter if you already have a water-softening system installed for your house?
No harm in still fitting it if it comes with the kit. Your boiler will last even longer. Had mine 4 years now and it’s about packing up. Think this is because of all the hard water
💙👊😎
😁
Hello,
I’ve just installed one of these that I bought from Costco. When I release the boiling water tap the water flows for a second or two making filling a cup difficult. Is this normal?
The boiling water should flow for as long as you hold the tap open.
Do you have a link to the unit you are installing?
Hi. The link is in the description