3D Scanned Peanut - Photogrammetry Workflow Agisoft Metashape Standard
Vložit
- čas přidán 27. 05. 2024
- In this video I share how I created a 3D model of a peanut.
00:00 Intro
01:03 Turntable
01:25 Backdrop Support Structure
02:22 Green Chroma Key Backdrop
02:58 Specimen Stand
03:32 Dice
04:02 The Peanut
04:29 Reflective Card
04:40 Turntable Software
06:10 Camera Settings
07:39 Background Photo
08:08 Agisoft Metashape Standard Worflow
14:28 Peanut Candle
Affilaited Link:
USB Ring Light in Video: www.banggood.com/custlink/K3m...
Instagram: / savvas_papasavva
CNC Channel : / educatingsavvas
Website: www.miscpro.com
A few people asked about the 3d printed specimen stand - which you can download from here now: www.thingiverse.com/thing:6157772
I'm speechless, titanic video, plus it was exactly what I was looking for... Thanks man , seriously thanks 🙏...
brilliant tutorial.
With "suppress stationary tie points" option enabled it may be possible to align photos without masking. This option removes feature points that stay at nearly the same pixels on several images so background becomes masked automatically
I'll try it next time I have something to scan. :)
Very nice sir!
Thank You so much...
You are using F22 with very high ISO values from what I can see. Try keeping ISO at 100 and have longer shutter speed to compensate.
Yeah, exactly.
Iconasys has photography turntables that can automatically capture up to 8,000 images per rotation. Iconasys photography software can also remove the background automatically from all the images. Has Agisoft Metashape integration too. Makes the whole process much easier and quicker.
But it sounds more expensive...
What was that you did to find the center of the circle
Oh it's clearer in this video: czcams.com/video/2Is4AmNsUFM/video.html
peanuts!
This turntable is $250, but the same company makes ones as low as $60. They also make one designed for people to stand on!
I paid around £150 for the turntable but there are cheaper models. Just make sure there's the built in camera remote trigger as some don't have that. And of course manual turntable with drawn increments work just as well - but are more involved.
I had a childish laugh that you made a MDF toilet seat
I've been calling it a toilet seat too! Lol
How did you print it with wax?
czcams.com/video/84955mrdwOc/video.html
Hi, what is the name of the guide you show in this video
www.agisoft.com/pdf/PS_1.0.0_Tutorial%20(IL)%20-%20Coded%20Targes%20and%20Scale%20Bars.pdf
Not sure if the link will be shared but it is on the agisoft website.
Semangat mantap mampir 👍
What iso we should ues
Lowest possible
Higher ISO can cause your photos to appear grainy (which sometimes looks nice) but doesn't help the photogrammetry software, so lowering that down to 100-200 will make the processing part a lot easier. I've just gone back over some later photos I used to successfully create 3D file (looking at the Properties > Details > ISO Image Settings) and the ISO was around 640 and the models created were good for my purposes. It seems newer cameras have much better noise suppression compared to older ones.
hello 3d printed parts link
That's a good point - where did I put this...
Chào bạn nha.ok đấy bạn ơi
Не чарта не понял. Наверное интересно)))). Спецэффекты.
Write the time code for the part you did not understand?
NUT!
???
Narrated by Bill Nighy.
I see him around London at least twice a year, for many years now.