Your factory is working extremely good. But the Indian rickshaw cosmetic design is a bit better. That is the reason Afghanistan is full of Indian auto. Can you compete with them? Just Improve your specifications and cosmetic design.
These Pakistani Auto Rickshaws cost $500 for a simple loading rickshaw to a little less then a $1,000 US dollars for a Passenger Auto-Rickshaw. The ones seen in this video are capable of running on duel fuel, Gasoline and Compressed Natural Gas or even Propane.
It is time that Tez Rafter start making cars too, in Pakistan. This is how Japan also got started, mazda used to make Auto-Rickshaw, then they started making cars. Honda started from making Motorbikes then later cars. So, please Tez Raftar Factory owner, please start making 4 wheel small, hatch back cars for Pakistan, like Suzuki Mehran size. Thank you.
$500 for a simple loading rickshaw to a little less then a $1,000 US dollars for a Passenger Auto-Rickshaw. The ones seen in this video are capable of running on duel fuel, Gasoline and Compressed Natural Gas or even Propane.
看到21:00時候，我們就發現印度製造的品質，在刻意安排的拍攝當中，還能出現這種失誤，後橋和避震器U型螺絲鎖緊不確實。 在26:27鎖緊龍頭時居然沒用工具!!用鐵鎚敲!!!! When I saw 21:00, we found the quality made in India. In the deliberately arranged shooting, such mistakes can still occur. The U-shaped screws of the rear axle and shock absorber are not locked properly.😉
$500 for a simple loading rickshaw to a little less then a $1,000 US dollars for a Passenger Auto-Rickshaw. The ones seen in this video are capable of running on duel fuel, Gasoline and Compressed Natural Gas or even Propane.
Good advice but the harmful UV rays, are not captured by the camera or transmitted thru the computer screen. If you look directly, in the workshop, then it is dangerous for the eye retina.
@@redfordrn exactly, but when you look directly to the welding spot, it's not only about the UV rays which harm you, it's also the ultra bright flash, which harm your vision! That bright flash would come to eyes even through the camera and the screen! Even 70% is not good.
You are probably thinking about India, but this is not India. But Pakistan. And Yes, Pakistan also used to have a Space Agency, called Supparco, which launched rocket into Space in 1960's.
clearly shows poor quality on welds, not fully welded in crucial parts of frame! poor mentality to manufacture everything in this country, a waste of time on all your videos, foundries mixing contaminated metals, no safety at all in most of production shown. perfect example of what not to do. employees wearing sandals!!!
You don't get it. C'mon dude! No shoes, no skills, no money : Those are survivalist videos that explain how to restart the industry after the final apocalyps.
If it bothers you so much, then who is forcing you to watch these videos. And does an employee's working dress, shoes, sandals has anything to do with you, or anyone in the World. I like wearing sandals when I am in that part of the World, it just feels good and comfortable in a hot weather there.
Just a few minutes ago I was watching Ford America assembly plant. The employee over there were in casual clothes and shoes as well. Very unprofessional and disrespectful.
I enjoyed watching this manufacturing process
One of the most useful vehicles of all time.
日本の昭和30年代前半を彷彿とさせてくれます
壊れたら自家修理出来る機械いいですね
素人でも手の届きそうな品物いいですね
我が国ではテクが進み過ぎていて
機械は空気のようになっていて
壊れたら買い替えるように出来てます
私 昭和時代自家修理してました
現在 我が国の全自動車はブラックボックス化してます
この様な機器は見えません
古き良き時代の製品を見せてもらって 感激
Your factory is working extremely good. But the Indian rickshaw cosmetic design is a bit better. That is the reason Afghanistan is full of Indian auto. Can you compete with them? Just Improve your specifications and cosmetic design.
why is the guy that can't mig weld, welding the chassis???
These Pakistani Auto Rickshaws cost $500 for a simple loading rickshaw to a little less then a $1,000 US dollars for a Passenger Auto-Rickshaw. The ones seen in this video are capable of running on duel fuel, Gasoline and Compressed Natural Gas or even Propane.
بسم الله ماشاء الله
أريد مشروعا استثمار مثل هذا معى فى مصر
Very informative.. good
Nice
Good job as always
Болты крепения ГТЦ не закрутили )))))
Ruční výroba tříkolky, to se hned tak nevidí. Klobouk dolů !!!
ME ENCANTO BUEN RABAJO MIL FELICITACIONES DESDE ECUADOR
It is time that Tez Rafter start making cars too, in Pakistan. This is how Japan also got started, mazda used to make Auto-Rickshaw, then they started making cars. Honda started from making Motorbikes then later cars. So, please Tez Raftar Factory owner, please start making 4 wheel small, hatch back cars for Pakistan, like Suzuki Mehran size. Thank you.
Регулировка подшипника рулевой колонки мое почтение!
бля, легендарный индусский тарантас, помню похожие муравьи на почте СССР гоняли
I want one for retirement with AC in it
I want one ❤
ONLY 50 DOLLAR AND THEY LOVE YOU LONG TIME...😂😂😂
Ở Việt Nam tôi không còn sài xe kiểu nầy nữa rồi
This is what German engineers show to scare small children! I think the word on the side translates to “death trap” 😅
I wonder how much one of these cost in US dollars?
$500 for a simple loading rickshaw to a little less then a $1,000 US dollars for a Passenger Auto-Rickshaw. The ones seen in this video are capable of running on duel fuel, Gasoline and Compressed Natural Gas or even Propane.
عالیه❤
19:27 Стиль. Стиль - это всё.
Россия докатилась до того, что такое чудо мы везем из Китая... Молодцы!
ferrari of india
Nice❤
Этот тарантас должен отправляться сразу на свалку.
❤❤
Management has the churning out volume over quality, especially the welding. A tack here, a tack there. NEXT..!!🤣🤣🤣
На сварочных постах стоят защитные экраны , это плюс, а то сварщика варят даже без масок .
मुझे एमपी के धार जिले में ये आटो चाहिए कितने का है ❤
Hi
看到21:00時候，我們就發現印度製造的品質，在刻意安排的拍攝當中，還能出現這種失誤，後橋和避震器U型螺絲鎖緊不確實。
在26:27鎖緊龍頭時居然沒用工具!!用鐵鎚敲!!!!
When I saw 21:00, we found the quality made in India. In the deliberately arranged shooting, such mistakes can still occur. The U-shaped screws of the rear axle and shock absorber are not locked properly.😉
Please reduce the noise of this vehicle, its also causing noise pollution in the city
CNG ? Euro 2 ?
The only clean plant!
But not clean work.
The work there is frenetic in Loco!!!!! hahaha LIKE ^^
How much does it cost to buy one?
Where can I order one?
$500 for a simple loading rickshaw to a little less then a $1,000 US dollars for a Passenger Auto-Rickshaw. The ones seen in this video are capable of running on duel fuel, Gasoline and Compressed Natural Gas or even Propane.
kiedy sprzedaż dealerska w Polsce? 🙃
This is the 3GS time this is uploaded
4:30 and...broke it
Does Pakistan made all the components?
How to order the autorickshaw ...
IMPORTANT CAUTION: All people watching this video, please don't look at the welding spot, that is very bad and harmful.
Good advice but the harmful UV rays, are not captured by the camera or transmitted thru the computer screen. If you look directly, in the workshop, then it is dangerous for the eye retina.
@@redfordrn exactly, but when you look directly to the welding spot, it's not only about the UV rays which harm you, it's also the ultra bright flash, which harm your vision! That bright flash would come to eyes even through the camera and the screen! Even 70% is not good.
Цена сколько можно заказат в бишкек кыргызстан
Third world reality............
Перезалив
Kapan NKRI bisa seperti ini kalo bisanya cuma bikin rusuh saja Allah huakbar 👍
What is this…a clean modern factory? BORING! Bring back the he-men!
Approximate engineering! They have a space program too. Imagine 😂
You are probably thinking about India, but this is not India. But Pakistan. And Yes, Pakistan also used to have a Space Agency, called Supparco, which launched rocket into Space in 1960's.
Cheap labor.
Так у нас москвич собирают
ح
ح
clearly shows poor quality on welds, not fully welded in crucial parts of frame! poor mentality to manufacture everything in this country, a waste of time on all your videos, foundries mixing contaminated metals, no safety at all in most of production shown. perfect example of what not to do. employees wearing sandals!!!
You don't get it.
C'mon dude! No shoes, no skills, no money :
Those are survivalist videos that explain how to restart the industry after the final apocalyps.
If it bothers you so much, then who is forcing you to watch these videos. And does an employee's working dress, shoes, sandals has anything to do with you, or anyone in the World. I like wearing sandals when I am in that part of the World, it just feels good and comfortable in a hot weather there.
@@redfordrn Are you serious?
It's a workshop, not a lounge.
Let's see the one you made
Just a few minutes ago I was watching Ford America assembly plant. The employee over there were in casual clothes and shoes as well. Very unprofessional and disrespectful.
the mfer in the suit isnt a real worker hes just an owner of the co, trying to look like he knows something