I wanted to come back and thank you for this video. The wheel wobble was pretty bad on my cars front wheels to the point it was hard to adjust camber accurately even. I installed the bearings you recommended last night and the wobble is gone. I drove the car today and it's so much better now! Makes you wonder why it didn't come that way. There can't be much if any cost difference in those bearing sizes to them!
I did this on my 124017. I actually put the original ones back on. The mr742rs gave too much binding and my wheels were not turning anymore.i had to loosen the wheel, and the wobbling was back, so it didn't make any sense...I think the wheels should be free to turn.
Really enjoyed the video and following your steps. My metal hex nuts are stuck on and dont seem easily removable like in your video 3:42 . How do I take them off to expose the pin?
I watch your videos and find them very interesting. The actual stock bearings are 1.8mm thick, and I think you'll have alot of bent drives shafts running mod 1 gearing. Just my opinion on the gearing keep up the modding
You need to use the Show More feature where you can list and link to the parts and tools you use. Do you have a description and/ or link to the tool used to pop off the links? Thanks.
You should put the part number (MR74 2RS) for the bearings in the description. Great videos, thanks for your help.
hey as soon as i take the tire off the hex is so hard to pull off yours came out so easy
I wanted to come back and thank you for this video. The wheel wobble was pretty bad on my cars front wheels to the point it was hard to adjust camber accurately even. I installed the bearings you recommended last night and the wobble is gone. I drove the car today and it's so much better now! Makes you wonder why it didn't come that way. There can't be much if any cost difference in those bearing sizes to them!
great , thanks
Thanks for the video. Very helpful.
I did this on my 124017. I actually put the original ones back on.
The mr742rs gave too much binding and my wheels were not turning anymore.i had to loosen the wheel, and the wobbling was back, so it didn't make any sense...I think the wheels should be free to turn.
Thank for ur tutorial video. It worked n I'm happy with that.
Greeting from Indonesia👍
Thanks!
Really enjoyed the video and following your steps. My metal hex nuts are stuck on and dont seem easily removable like in your video 3:42 . How do I take them off to expose the pin?
Great video got any links for those bearings
Either that or using a spring washer. Would like to try it!
Hi. Nice video for 124019!
Btw. What bearings would you suggest for wltoys 144001 to get rid of wobble?
I watch your videos and find them very interesting. The actual stock bearings are 1.8mm thick, and I think you'll have alot of bent drives shafts running mod 1 gearing. Just my opinion on the gearing keep up the modding
Mr74 2rs for front and rear??
You need to use the Show More feature where you can list and link to the parts and tools you use. Do you have a description and/ or link to the tool used to pop off the links? Thanks.
what should I do?
what if your gonna be driving it about 60/40 dirt to street ? would it be wise still to fix the wobble?
Cool upgrades I’m doing upgrade on my wltoys144001
Does anyone know the dimensions of the 12mm hexagon connectors for this car?
you have a link to the servo you used? Thanks.
www.amazon.com/dp/B07JQL8GZ7?ref=ppx_pop_mob_ap_share