Im just now seeing your video and am reworking/refurbishing my 5sfe Toyota head because it was shot im not doing what your doing and your engine from what i see and am watching looks like it has to be quick. 😊 Im just doing what i need to bring my engine back to stock when it was new and i wanted a video to just see the valve lash adjustment and yours popped up and you did a good job of showing and explaining the process. But man oh man trying to find shims today in 2024 in usa sucks so many people just want to scam and sock it to you 😮. And too i think Toyota is proprietary like mercedes they just dont want you to go aftermarket for parts on some things.😅 Anyways have a great day Maybe ill catch another video of yours showing that car in action Art😊
Keep em coming mate. Love the new content. I was looking for a good vid on clearances for 5e and this applies to a lot more with bucket and shim set ups. Love the bit of music😍
Thanks for the detail! I've recently picked up an LS400 (Celsior) that apparently has the same style shim over bucket lifters & its got some noticeable valve noise! Not looking forward to doing this on two heads on an angle 😕
What website did you buy these shims from? I have a Nissan that has a bucket setup and you can't get shims anymore. I used a 25c coin under the intake buckets and a 5c coin under the exhaust. works mint but idk how long it will last lmao
How would you go about setting the valve clearance if you're only given the "hot" specs. Speedvision cams only give you .010 INT and .012 EXH hot specs and not cold specs.
Hi Matt are the cylinder heads the same 5efe and 4efte head as I’m trying to sort valve springs through Allen at performance valve springs as I plan to turbo and cams my 5efe in my glanza
No, the Toyota dealership has a special tool that allowes you to change the shims one at a time without removing the cams. They wouldn't give it to me or sell me one 😂
If you don't want to pull the bottom end apart ive also had this done while the entire bottom end is still assembled lol. Gave it a good wash, degrease, re assembled the top end and away it went
I watch 20 videos on adjusting shims yours was the best thank you
I was worried I wouldn't find your video again but I found it I liked how you ordered those shims from the online people thank you
Im just now seeing your video and am reworking/refurbishing my 5sfe Toyota head because it was shot im not doing what your doing and your engine from what i see and am watching looks like it has to be quick.
😊 Im just doing what i need to bring my engine back to stock when it was new and i wanted a video to just see the valve lash adjustment and yours popped up and you did a good job of showing and explaining the process.
But man oh man trying to find shims today in 2024 in usa sucks so many people just want to scam and sock it to you 😮. And too i think Toyota is proprietary like mercedes they just dont want you to go aftermarket for parts on some things.😅
Anyways have a great day
Maybe ill catch another video of yours showing that car in action
Art😊
Keep em coming mate. Love the new content. I was looking for a good vid on clearances for 5e and this applies to a lot more with bucket and shim set ups. Love the bit of music😍
Thank you helped me understand the equation better.
Nice, now I just need to take the time and see which shims on my head were rearranged by the machine shop.
Great video! Explains the whole procedure. Thanks!
Thanks for the detail! I've recently picked up an LS400 (Celsior) that apparently has the same style shim over bucket lifters & its got some noticeable valve noise! Not looking forward to doing this on two heads on an angle 😕
Great video -- thanks so much for showing this!
A great video my friend. Congratulations from Venezuela.
Good day Sir..can this be applicable to any or all backet tappet type engine?
thank you..
From Philippines 🇵🇭
What website did you buy these shims from? I have a Nissan that has a bucket setup and you can't get shims anymore. I used a 25c coin under the intake buckets and a 5c coin under the exhaust. works mint but idk how long it will last lmao
niceeeeeeeee thanks for the information
Where can I find cam timing? My vehicle is 4A-FE
How would you go about setting the valve clearance if you're only given the "hot" specs. Speedvision cams only give you .010 INT and .012 EXH hot specs and not cold specs.
Id just use those specs anyway. In one of my old engines i had to start it to move it and one of the clearances was .026 and it was fine lol
@@MattBerrymotorsport it wouldn't cause the valvetrain to be noisy or be losing out on power?
@@HamzaIbrahim as i said i only used it to drive in and out of the workshop.
Just do the hot specs then please yourself
@@MattBerrymotorsport alright so measured them hot vs cold and they were mostly .002 looser when hot than when cold. Just thought I'd share.
Hi Matt are the cylinder heads the same 5efe and 4efte head as I’m trying to sort valve springs through Allen at performance valve springs as I plan to turbo and cams my 5efe in my glanza
Yeah they are the same for valve springs.
Second gen 5efe with coil packs im not sure, ive never used them.
Thanks for di information ,, quick question is the engine in the rear of di car stock
Both forged
So it's safe to say that adjusting shims always involves taking the cams out?
No, the Toyota dealership has a special tool that allowes you to change the shims one at a time without removing the cams. They wouldn't give it to me or sell me one 😂
You buy one on Amazon! Mine comes in today
Brilliant!
Very good
Hey Matt, would you by any chance know what the clearance should be for a stock head?
@Will Clausen thank you! That’s just the thing, the “golden” clearance is what I’d like to know
i use the same 10 and 12 for the stock clearances too
@@madmovements619 the 4AFE is .20 inlet and .30 exhaust..
Hi, what's the site for the place you got the cams from? and what cams you got?
Tighe cams.
Part number for the cam profile is B1057B
I Matt, I try to find on the website for that cam type and can't find it. We to email them? Also how much it cost if you remember. Thanks
When you do a new engine build , do you skim the block and the head or just the block ?
If using a MLS head gasket I always get the head AND block skimmed, just enough so that the gasket sealing surface is flat.
Brilliant , love the build and how clean engine bay is !!!! 🇬🇧
If you don't want to pull the bottom end apart ive also had this done while the entire bottom end is still assembled lol. Gave it a good wash, degrease, re assembled the top end and away it went
Can put some masking tape down the open holes to stop stuff going into the bottom end...
@@pettingerwilliam1 thankyou man any questions, send them through
is that brian evans at the end hahahah
Yeah how the hell did you pick his voice? 😂
Who did the exhaust? LMS laidlaw they look like his work.
Me a few years ago
😎😎❤️❤️
apprentice me pls
Jgb .....
buy some metric feeler gauges ! lol.
Sounds like you made it worse😅