DIY: Freightliner M2 service
Vložit
- čas přidán 27. 05. 2022
- Doing a service on 2015 Freightliner M2 with Cummins engine 6.7L ISD. Changing motor oil and oil filter. Replacing fuel filter and fuel water separator filter. Adjusting brakes and greasing suspension and driveline.
Tools you need for this kind of job.
socket size for the engine fuel filter (1 1/8") to remove fuel filter.
CTA Tools 2525 Pro Square Drive Oil Filter Wrench, oil filter remove tool, you would need 3/8 rachet and extension.
2x Oil Filter Belt Wrench Adjustable Strap Spanner Removal Tool 3/8'' to 5-1/4'', this tool i use to remove fuel water separator filter.
Titan 85512 Truck Meritor Air Brake Slack Adjuster - Adjusting Tool Wrench Set, air brake adjustment tool.

Thanks to this video I just fixed my neighbor medium duty towing truck 🚚 that run out fuel...because road service never show up... thank you so much for the video WE APPRECIATE IT 👌👍✌🙏
There’s excellent pm service!! Thanks for sharing your video!! Hope your company take care you!
Thx , it’s my company :)
Thank you for the video!
Just subscribed bro, now I think I can do my own oil change thanks bro 👍🏽👍🏽👍🏽
I’m glad , I can be helpful :) if you have any questions feel free to ask , I usually quick with reply’s .
Loved your video brother…Please make more..Conducir segura!!!!
Thank you ! I will try to make more video if I will be doing anything on it .
excellent video thank u 🙏👍
I’m glad you like my video.
Fantastic video! Thank you. What is part# for fuel filter?
Thanks for the great video. Where do you get the ratcheted clamp for the filter? Mine is tucked up in the motor and little space to get to it, I need a way to be able to take it off?
ferrumtools.net/products/fuso-10-5-17-tons-removal-tool-for-oil-filter-dr-1-2110-125mm?variant=40157664706603¤cy=USD&gclid=Cj0KCQjwjt-oBhDKARIsABVRB0zXFRHgX4SkvGq3z_OTtzMCGtMggC09NA1WZ8rDddeYqpVvGHy1aAoaAsBpEALw_wcB
This is the similar one , I can’t find anymore someone I have.
Wait this one is 90 dollars ave the one you posted in the description is like 15 dollars. Which one do i get? @1RedlineExpress
Is there a way to check my brake fluid level and add some if needed? My trucks brake started locking up for a second while excelerating?
It’s a air brake system , if you have air brake system , then you have bad chamber or slack adjuster . Maybe air leak.
Where can i get that tool to change the oil filter? Also whats the part # of the drain plug thanks in advance
Oil filter tool I got it from snap on sales rep . Drain plug you need to go to local freightliner tell them what kind of engine you have and they will give you right oil drain plug. There is a 4 types of drain plugs.
That's a warning! The abs sensor is bout to fail .....
maybe but its doing this over 400k :)
What was the name brand and part number for that brake adjustment tools?
Lang Tools 4651 Automatic Slack Adjuster Release Tool and Wrench, One Size, Made in The USA. a.co/d/iuXqWnK
at the miles that you have on this truck, how is the engine, is it strong or in soon need for major maintenance to engine?
it has 565470 , to be honest I don’t know how long this engine last, but so far it runs really good. I do maintenance every 8000 miles.
I pull four car trailer behind pulls really good.
I heard if you don’t abuse it and you do maintenance in time it will run up to 1 million no problem. U
@@1RedlineExpress very nice thank you I appreciate it
@@1RedlineExpressI’m looking at a 2009 m2 with almost 200k and I’m also planning on pulling a 3 car hauler. What kind of mileage are you getting hauling 3-4 cars also did you have any major repairs or emission system failures around the 200k mark?
I have one 2015 with 500 thousand miles too.Can you tell me what oil did you use?
Rotella t4
@@1RedlineExpress do you think t5 or t6 work well? I am looking for less frequent oil change.
@@cankofana yes t5 it’s totally fine to use . But I recommend to stay with same oil , but that’s my opinion .
what is the interval recommended by cummins to change water-fuel separator?
I do it every time with fuel filter, fuel filter I change every time with oil change
@@1RedlineExpress do you see noticeable dirtiness when you change it?
@@cankofana not really , but 550k on it now and now , fuel system doesn’t have any issues and never had any issues.
Is this 4 inline or 6 ?
6
Спасибо 👍🤝
Не за что :)🤝
Can you list all the tools needed for this job
I will try my best :) add it to description on the video . Today or Tomorrow
@@1RedlineExpress Thank you my friend. Trying to learn to do my own maintenance to save money
@@Shawn0829 please read description of the video. I add the list of the tool I was using . Plus you needs a grease gun with a good grease , water resistant grease.
@@1RedlineExpress thank you so much
@@Shawn0829 if you have any questions feel free to ask
Every 8k miles. This must be a city truck yes? All local driving?
I run 3 states , OR, WA, ID . If I used full synthetic oil, I would run probably 10k-12k miles on it.
How many quarts of oil did you use?
What??? You put 50-52 quarts of oil in that motor?! That’s 13 gallons of oil.
@@dalechristensen1804 little over 5 gallons
@@dalechristensen1804 I think I mess up lol I count the jars I have and my jars are 2.5 gallons sorry
@@dalechristensen1804 so sorry I miscount it’s a 20 quarts
What kind grease you use, thank you
How many quarts?
I have Cummins 6.7l ISD it took 20 quarts
I switch from Mobile Delvac 15-40 to Rotella T4 15-40 , with delvac I have to add 1-2 quarts after 6k miles with rotella level stays the same till next oil change 8k miles .
Do you change the crank vent filter?
@@matheusserra8598 I believe you have to change them once in 300k . That’s what I was told by Cummins specialist .
Ur deff don’t work????
it does :)
@@1RedlineExpress ❤