RAMPAGE 2021 Forest Area FPV Flight 360 Video (look around)

I'm a few years late, but here's a 360 "VR" video of one of the areas at Rotor Riot Rampage 2021.
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at rcwithadam.com/
Want to support RCwithAdam? ↴
KO-FI: ko-fi.com/rcwithadam
OR
PATREON: / rcwithadam
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam

[@MadDragon75]

Sweet! It took me a second before I realized I can pan the cam.👍🏻

[@delcopond]

Hi there:
I have built a Bat plane, it is great (I will send you a photo). Could you tell me how far from the leading edge the CG is?
In some comments he says (at the tip of the wing) but I don't understand what he means exactly.
Thank you so much.

[@RCwithAdam1]

Hi! Glad you enjoy this design! This will change depending on the weight of your electronics, etc., but if I recall correctly, it should balance when held between 60-90mm from the leading edge of the wing. Does that help?

[@delcopond]

@@RCwithAdam1 The complete model with 3S-850 mAh batteries weights 370 g. With the battery placed at the very front, together with the 25 g motor, the plane is balanced at 11cm from the leading edge. To reach 9cm, I would have to add 70g of lead 😕
I'm a bit disappointed because so much weight means that I'll have to fly it very fast, when what I actually wanted was to fly the BAT slowly and for a short distance.