F2L made EXTREMELY EASY (only one step) (read description)
Vložit
- čas přidán 13. 06. 2017
- F2L made EXTREMELY EASY (read description)
2:38: One Step to Pairing
3:18: Three Obstacles to Pairing
6:20: Three Mistakes in Pairing
4:39: Worst-Case Scenario
Cube: GAN Air
Setup: AT4040, MOTU 828k, Logic Pro X, Final Cut Pro, iPhone SE
•This video is NOT for:
-People who already know F2L and just want to brag
-People who still have trouble solving the Rubik's Cube
-Trolls and other people not seeking to learn
•This video IS for:
-People who are able to watch the whole video
-People who can already solve the Rubik's Cube using some sort of layer-by-layer method, entirely by memory, preferably in less than 2 minutes
(1) This tutorial is NOT about beginner's method. The video STARTS by explaining why beginner's method is redundant, after which I immediately explain F2L. Beginner's method is layer-by-layer (LBL). F2L is pairing edges with corners. The lateral algorithm is an algorithm used in LBL and F2L.
(2) This tutorial is SUPPOSED to be extremely basic and easy. You will get slower while you are learning F2L, but with enough practice you'll get faster than you'd ever get with LBL.
(3) This tutorial is THE FIRST IN A THREE-PART series on F2L. If you think this is too easy, then go ahead and watch my next two videos on F2L (links below).
(4) A big part of F2L is intuition and finding your own ways to get faster. If you find shortcuts, write them down and use them! I guarantee that watching my Essentials video (link below) will be a huge help if you are just starting out.
(5) Eventually, learning algorithms will be the best way to go for F2L. Once you feel you've reached that point, watch my Advanced F2L video (link below) to learn the easiest solutions to all of those cases that you've been scratching your head about!
(6) Keep on cubing!
•Three Essentials of F2L (must know!):
• ESSENTIALS of F2L (mus...
•Advanced F2L (all the hard cases!):
• Advanced F2L
Want easy access to all the BEST algorithms for solving?
I’ve got a list that I’ve been building for years that contains all the algorithms for:
-3x3x3 last layer (2-look and 4-look)
-Every F2L case
-3x3x2 last layer
-Megaminx last layer
-X-Cube
-Mixup Cube
-Blind-solving
-Parity/conversion for large cubes
You can get this list for only $1! Contact me at:
/ chrisbandyjazz - Hudba
![[TUTORIAL IN THE DESCRIPTION] The BEST AND EASIEST way to do F2L: ZETA-SLOTTING [*New Method*] #F2L](/img/n.gif)
yoiu dumby it make no sence
WhizzKids Drive Fix your spelling
WhizzKids Drive and also why are you even commenting that its bad anyways?
It works i tried and its the easiest you can get so stfu
I just face palmed so hard, I felt my brain.
Story Man 👌👌👌 I’m dying XD
2:39 Fundamental step to pairing
2:58 Insertion
3:22 Corner/Edge not on top layer
3:44 White on top
4:05 Paired, but edge flipped wrong
6:26 Mistake 1: Edge placed on wrong side of corner
6:57 Mistake 2: Edge gets pushed into middle layer when showing corner during pairing
7:27 Mistake 3: When solving a new pair, you mess up a previously finished pair
dude, the other tutorials were so complicated, but this was really simple, it helped me a lot, thx!
Yes this one is too easy and efficace
Exactly
I like how simple this tutorial is. I personally am also a fan of "being able to do it" more than "doing it the best way", as a guideline for teaching, like you have presented it here.
But I think you need a balance, because the simpler a concept becomes, the farther it strays from being the best way to do it in practice. At first I liked the simplicity of your method, but I think the lack of different techniques actually make this method slower than layer by layer, and requires a decent amount of relearning later on (such as ignoring RUR' inserts, and ignoring white-on-top for the corner).
For ease of learning I think you did a really great job, but I don't really agree with the details of the method being taught.
J Perm
Thanks. I set the balance so that people could at least use F2L to complete a solve. This video is already 8 minutes long, so I didn’t want to start adding on more advanced stuff.
If you watch my next video “Essentials,” then you can get some of the more intermediate techniques! A lot of people ignore that video, which is unfortunate for them.
J Perm What were you doing seeing this lol, I mean you know a little more than begginers f2l :D
@@ChrisBandyJazz i still cant get it so hard
J perm, finally I learnt f2l after watching that video more than 100rd times
J perm your my favourite cuber
This has to be the only tutorial you need.... instead of memorizing algorithms... You made me understand what I'm actually doing with the cube... Kudos to you
1:28 yaah it's rewind time
Ah ha ha, ah that's hot, that's hot.
This video is great.!Took me a few watches but it totally makes sense! Now just a matter of practicing.
I've made some timestamps for myself and hopefully this will help others.
Intro
2:38 - One Step to Pairing
Three Obstacles to Pairing
3:20 - Either corner or edge not on top
3:43 - Corner white on top
4:04 - Edge flipped wrong
Demo
4:39 - Demo with Three Obstacles ("Worst-Case Scenarios")
Three Mistakes in Pairing
6:24 - Edge on wrong side of corner
6:55 - Edge pushed into middle layer
7:22 - Un-solving pairs accidentally (slots explained)
Planning to do a tutorial on Pyraminx, 3x3x2, and 2x2x3. That sound good to you guys? I could also do X-Cube, Mixup Cube, or Cubic 3x3x5 if you guys are interested-let me know!
Chris Bandy When i Insert and pair over and over again the lauers never solve. Im so confused right now lol. What am i doing wrong!!??
Everything but the pyraminx
Please do a 2x2x3 that will help me a lot
thanks so much, I finally learned how to do f2l, I have been trying for weeks
Mixup
Woah. That actually did help! Thanks to you and Brody's F2L flowchart, I've been able to solve it like 4 or 5 times today for the first time. Thank you.
Dude thank you so much its more simple and detailed unlike other tutorials
this is the most easily digestible F2L tutorial ive ever seen. im gonna be somving F2L in no time
This video is probably so far the best video that explains f2l clearly. This is really easy to understand
Kopara Perera wow thank you!
The best f2l explanation video
Im scrolling through the comments and this guy is a legend and also a savage when responding to people
Thanks man, this was very easy to follow
Sorry for that, you pointed me in the right direction and i found a different way how to get a pair thanks for the tutorial! I would recommend to watch this around 3-5 times to fully understand the obstacles and movements.
Thank you god! For so long i wanted to learn the f2l and finally, this channel showed up!💪
I was searching for a very long time to find someone who could explain it decent, and you did the best. Thanks!
3:20. Obstacle 1
3:43. Obstacle 2
4:03. Obstacle 3
very helpful! took some time to switch from beginners method to f2l but after practice and determination, i can finally use f2l to start solving my cubes. thank you!
Best step-by-step so far, thank you very much
2:42 start
3:20 corner or edge is not on top
3:43 white on top
4:04 together but one is flipped
problems:
6:25 the tops are right but the sides aren't in a pair
7:24 when u solve one pair, another gets ruined
thanks this helped alot
you don’t understand this saved me so much time
Have been solving via the beginner method, learned a few little extra bits and got "fast" doing it (quickest was 1:40), but noticed a huge chunk of that was the amount of pausing and messing needed in solving the 2nd layer. If I wanted to get under a minute, I knew I had to sort this part out.
Decided to look up CFOP and general F2L methods - got the gist of it to the point I could do it somewhat, but most tutorials were frankly not the best - generally full of jargon not immediately obvious to beginners and little emphasis on explaining in detail. This is the first one which truly clicked with me! Very clear and easy to understand.
watched 5 F2L tutorials... always got lost, but this was the one! great job!
This was literally the only F2L guide that actually helped me, thx so much!!
How to insert: 3:07
1st Obstacle: 3:20
2nd Obstacle: 3:44
3rd Obstacle: 4:05
3:21 Corner or Edge not on top
3:44 Corner is white on top
4:03 Corner and edge not same color on top
@IV BADSPORT VI5 lol
Super helpful video. Thanks 🙏🏾
its like you were listening to my ranting when i tried f2l for the first time last night. most of my questions are here. thanks alot
I don't why others did not like this tutorial
But it very easy to learn and to educate and it helped me a lot
2:38: One Step to Pairing
3:18: Three Obstacles to Pairing
6:20: Three Mistakes in Pairing
4:39: Worst-Case Scenario
Hands down the best and most simple tutorial for F2L. Thank you so much!
Great! Finally finally I get it! Nicely done from a beginners perspective. Best F2L video so far
It normally takes me 1 min to do the beginners method. But not with f2l it takes me 30 min. Thanks!!
damn I've watched 4 f2l vids and there's still no vid that i could understand and actually learn how to f2l from it, anyone tell me how
Same here
Watch jperm
@@kraziforce2473 watch jperm
This video actually helped me, sick of confusing really fast f2l tutorials
thank you so much i have been trying for months and all the tutorials were garbage but this is awesome
Great video tutorial , sadly i learned the method thsts much slower and ineficient but anyways this helped me understand from first try how f2l works 👍👍
So many double pairs broken in this video... Gives me shivers.
Nice tutorial though, great for beginners.
James Yang Lol ikr! Ppl gotta start somewhere tho
Finally, I was able to understand this bloody method, thanks a bunch man :)
Boy you explain this so well. Thank you
This. Was. AMAZING!!! The steps were explained clearly and words like cross, open, and close were substituted for that “R-Prime” and “L-Prime” foolishness. Thank you, this video helped me reduce my solve time from 1:55 to 36 seconds!!!
Awesome!!
If you're gonna get fast, you need to learn that "R prime L prime foolishness". That's called notation, and it's necessary for learning algorithms. Otherwise it'll be like learning guitar from someone telling you "put your first finger on the 3rd fret, your second finger on the 5th fret..(etc)...Congrats, now you know one note, 57 more to go!"
@@justsomeguy892 dude it was just a comment to show my appreciation for the video
@@jeffbezos9944 ok
This is the most easiest f2l ever. Thank you so much.
Wtf man how he started with a half solve cube how????
@@perisanti7571 .l..that’s the point of the f2l did you read the desciription
Fantastic! Took me two days to learn the beginners way. Learned this in two hours!
Thank you man i been look for this now i find it
I managed to solve the three laterals but everytime i want to solve another, another one is broken
Notes for myself
How to insert: 3:09
Obstacle 3- Edge and corner won’t match. 4:06
Mistake 1: 6:25
Very helpful to my beginner friends, thanks a lot. The video shows step by step process and slow enough to be understood.
You explain it so much better than any other video I've seen, thank you
nobody:
me:watches inn 0.75 speed and is still confused
I know im so late to the video but how is it that most people dont get the instructions. It is so simple and he speaks so softly. Thank u so much for the tutorial it helped me alot.
Thnx , ive could not have done it without you
You are the only one who tought me f2l, thanks.
its a good starter to f2l and the comments are aweful
welp, I can't seem to get it. It feels like I've watched every tutorial for F2L on CZcams, it's crazy confusing for me, I'm not going to stop trying but geez I thought it would be easier.
What exactly are you having trouble with? Like what part in this video do I say something and you think, "I don't understand that"?
Try J perm
Chris Bandy it’s mainly most of the cases and algorithms.
@@Yettii watch J Perms videod
Nicholas Yeo I tried
Thanks for sharing! I'm trying to transition from Beginner's LBL to CFOP and other videos literally had me in tears from frustration; this vid really helped get some of the concepts clicking for me!
Svartr I don't know why but I burst out laughing while reading your "....literally had me in tears..." Line, perhaps it was because the same thing happened to me! Haha, Chris is a legend lol
Very good - especially how you relate it to the beginners method at the, erm, beginning. Thanks.
''You are failing to think in all 3 dimentions'' XD
this was the first time I did every f2l pair correctly 😀😊
really love it love it tbh the other tutorials were really damn complicated you made it look so easy 😊 tysm!!! ❤️❤️
Edit - You've earned a Sub 😊
Thank you! Finally, a tutorial that shows why you're doing the steps rather than just memorising algorithms. I seriously wasn't getting on with the L, U-prime, L-prime way of thinking about it - the open, away, in, close way makes total sense!
Ralph Pickering Thank you so much!
thank you for this video helped a lot :)
2:38 One Step to Pairing
3:18 Three Obstacles to Pairing
6:20 Three Mistakes in Pairing
4:39 Worst-Case Scenario
Thanks
jesus christ this solves every problem I had in 8 minutes
Me too!
I've been struggling for 2 days with F2L and I did it for the first time when I watched this video.
keep in mind this is still really slow and this is still beginner method
@@oppaio this isnt F2L this is still beginner method
dude thank you so much, your so good at teaching
Broo, this was the most easiest and amazingly explained tutorial of a difficult for me thing, Thanks for this tutorial!!
Hello, Thanks for the video, But I am in the need of help. After making 3 of the 4 slots solved, I cannot complete another slot. I watched until the end but It says to always use a slot that is unsolved. But when I have 3 out of 4 solved there is no slot that isnt, as the other side of the unsolved slot will move when I use the unsolved slot. Please help. Thanks. ❤️
Helped a lot. I dont understand the negativity in this comment section
Cause its the 2l method and not f2l
You made the best sense of F2L to me, so far. Thank you!
Thank you so much for this. I couldn't make sense of any of the more popular tutorials but yours clicked and made me finally understand how to do it intuitively!
People commenting that this isn't F2L clearly haven't watched past the intro and are just eager to be mean.
this is actually a really slow F2L method
This is for myself: 5:04 4:40 5:13 5:47 6:43
Whenever he said f2l is a list of 40 algorithims, I became like "NOPE NOPE NOT TODAY"😂
Junky Tornado Haha you can solve it completely intuitively! but if you want to go the algorithm route you just memorize 40
@@ChrisBandyJazz ok
@@ChrisBandyJazz but intuitively??? how???!?!
Junky Tornado have you watched this video? Have you watched the essentials video?
@@ChrisBandyJazz i dont understand anything you say there :(
Thanks a lot bro you helped me a lot keep it up
Thanks for this video! Exactly what I needed. 👍
even if you coded this into my head i’d never understand it. i hate how dumb i am. i’ll forever be stuck at 3 mins.
I get it man, i thought so too, rn im trying to learn cfop because so far i only know the begginers method and i want to get faster but it seems like i have the same time regardless :( dont give up tho, practice eventually makes perfect, just needs time
Yeah it does I recommend watching the beginner video
You can easily get sub 1 minute with beginner’s method. Also, learn from TheSergsB ans J Perm
You can do this algorithm also
Right: (U R U R’ U’) y (L’ U’ L U)
Left: (U’ L’ U’ L U) y’ (R U R’ U’)
Thanks bruh! This video helped alot
best F2l video that I have seen. Tanks so much
I have a problem that sometimes I have a pair but the in the opposite way, so If do the insertion as example I will de orange pair on the Blue side and the Blue pair on the orange site. How do I fix this?
Same
You're a Giga chad
This is what I wanted
Thanx sir
Chris your logical and simple explanation helped me understand F2L after one time of watching more than the 20 other videos I've already watched but got nothing from.
This is a beginner's f2l, i know because i use the same method. You actually have to take the time to look and process and execute the moves and sometimes all blocks could have the color yellow. And the only way to remove the yellow is when you do a random ''Lateral Algorithm''. It's still a good method though but i wouldn't recommend it. Nice video tho! :)
No this is F2L. It is an introduction but it is true F2L. Once people learn it they should watch my next 2 videos in the series to get more advanced concepts and algs
@@ChrisBandyJazz Oh ok, thank you for making me understand/explaining it properly. I'll make sure to watch your next 2 videos to be more advanced in it. Keep up the good work buddy. #PositiveVibes
Hey I have a problem.. When I do the pairs and insert them, other Pairs that I have already solved just get scrambled again. So you could technically do the edges infinite times.. I dont know what I'm doing wrong
Watch the whole video-I explain that at the end
.
its confusing tho
i dont understand it
@@oscarwalls3770 Every time you're about to twist one of the sides up or down, look and see-did that twist move one of my completed pairs?
If yes, then go back (twist that side back to what it was). Adjust the lower two layers of the cube at the same time (i.e. a d-move) and try again.
If no, then you're good to go.
The point is to only do moves that don't disrupt the pairs you've already completed. There will always be an empty slot you can use.
Wow thanks a lot dude,i hv found many video tutorial about a week but still cant learn f2l,finally i learned thxxxx
Thank you for this video 😊
Wish this was the first f2l vid I watched.
Me too lmao
Just started to learn f2l and from all of the tutorials that i've watched, this is the only one that I could understand clearly. Best f2l tuto on youtube ✋️
agreed
This was sooooooo helpful, thanks you very much
3:11 (for myself I can’t remember the algorithm for some reason)
Advice for beginners: Guys like 3 months ago I watched this but I understood nothing and my average was like 50 seconds or so at that time but after I started learning CFOP I learnt the algorithms but I didn't really know what they were doing. So how I learnt each F2L case is that I did the algorithm and followed where the pieces go and how they pair. Learning just the algorithm does help you but not that much. If you know what each algorithm does and how they pair it will be better (By the way I got so much faster in 2-3 months with cfop. Now I average around 17-22. My PB is 14)
I strongly recommend you to learn cfop. Especially master the F2L step. Good Luck !
Dude, that's both awesome and inspiring! I can do the LBL method in about 1:42 (best time) and I'm now going to relearn the CFOP method and see where that takes me.
do you mean pb as in peanut butter cause I like mine extra chunky
You are the best! I have watched MANY F2L videos, but could never understand them and I would usually end up quitting. This video is easy to understand and there are time stamps in the description that are very helpful. I finally did F2L and with a little more practice, I'll be a pro at this! Thank you so much!
I subscribed and liked the vid because you're the only one I understand about this F2L thing.Thank you so much keep up the great work
Wow, I appreciate it man!!
If you wanna learn f2l just watch j perm much easier
Exactly
Steven Li I watched it and it doesn’t work
Steven Li This tutorial is better
I can do beginners method in 2 minutes average...trying to do cfop takes me about a half an hour. I've watched at least 5 different tuts on it. wtf?
When you first learn F2L, it will be slower, but then eventually it will be faster than you can ever get on beginners method.
Remember that this is only the very basics of F2L; watch my other two videos once you are ready to go more in depth.
thank you for your videos man. I will keep trying
Great video and well explained
Thanks it really helped me alot focus on the logic of F2L . This is way better than memorizing tons of algs.
Just call it a edge not a lateral it just confused me
Question, how do you apply f2l if three of the slots are solved, and the last pair are not aligned?
use the last slot where the pair will go
Put pair together when over the slot
thanks for this vid u helped me alot
The only video that maked sence. Great work with the video. I’ve been searching for a couple of days and then i found this video. Im not kidding but i watched this video 3 before i almost could do i like that. Thanks a lot