Ring Blower Restoration
Vložit
- čas přidán 21. 03. 2019
- Ring Blower Restoration Video
I found this ring blower from recycle shop in my city, costs 25$. I will use it for dust collection system in my workshop.
HO HSING
RING BLOWER Model RB120A
1 PHASE 200-240V 50/60Hz
STATIC PRESS 300 mmAq
QUANTITY 0.65 m^2/min
OUTPUT 200W AMP 1.9A
POLES 2 RATING CONT.
H.S. Machinery Co., Ltd.
I hope you find something useful & enjoy from this video!
I am happy to receive your feedbacks, advices, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
--------------Thank you so much for Likes & Comments-------------- - Jak na to + styl
That'll make a nice little dust collector! Great restoration!
What a great upload. I thoroughly enjoyed watching this and learned lots. Thanks for sharing ATB
Vc tem .meu reapeito. Parabéns
I LOVE THIS VIDEO AND I DON'T EVEN KNOW WHAT A RING BLOWER DOES!
Great job...On the restoration and the video editing!
Nice job, looks & sounds good. Nice to see that you installed an Earthed cable to it. Might have been a good idea to carry out Earth continuity & Insulation resistance tests to ensure safety, Before putting it back into service.
Este estava mais fácil! Tudo limpinho e novo por dentro. Ótimo serviço.
Great job
Beautiful work! Does the primer need to dry completely before applying the color Cote or does it just need to flash? Thank you.
How skillful you are, bro!
3:12 - WALL-E's eyes!
Good to see that the aluminum impeller itself hasn't been damaged at all hence sucking in cloth fibers and other debris.
Great job on the restoration process! 👍
Well done always enjoy your work
why is this kind of video so damn satisfying to watch.
What a great job man.
Gave it a like for the test at the end, I knew there must be a purpose for those super cheap anti static things.
Indeed great job.
Ball bearings with the hammer!?!? Great way to reduce their life.
Definitely
Hi the4😎, that's pretty cool. Been able to recycle something into something new. And it's was a good deal $25.00. I like the videos keep 'em coming.
Good very good .. it is so nice and enjoy. I hope best wsheis for you
Great paint, what kind is this mettalic color?
Love that color
Well done good job.
You have tool great!
Anh Nguyen Sign up for your channel, thank you very much
بارك الله فيك يا بطل العالم
Very good restoration bro 👍👍👍👏👏👏
did you tested it on 110v? because its a 240v Motor.
Nice restoration! Sounds like an air raid siren.
It ain't over till the fat Ho Hsing, I guess... 😸
getyourkicksagain ....it aint what now???
Chẳng hiểu sao mình rất thích video của bạn
I can see why you didn't change the ball bearings, but the cap MUST be replaced.
Hmmm new to your channel. I want to know did the item work prior to the job being completed with just new paint and cleaning. I didn’t notice even new bearings was put on or checking if the armature had continuity or even a inspection of the coils wrapping or anything don’t believe this was as you wrote a restoration I believe you just cleaned it up and made it pretty
Dude this is a POS made in China blower. It was probably $20 new.
Could be however just saying it’s no resto maybe a resurrection.
@@CivilDefenceCanada actually I looked up the maker of this thing and its a Taiwanese company that's been making these since 1961. This thing looks about 1970's or 1980's vintage.
WHAT EVER!!
Is it for aquarium use
Nice work.
Super talent
With that inpeller, it looks like it could pull a bit of a vacuum as well.
That's one of the major uses of regenerative blowers.
Nice editing.
Qual a finalidade deste equipamento? Não entendi pra que serve....
nice job bro
Very useful vedeo !
Super bro
Nice siren restoration
Nice job pal
Well done
Amazing
Good video, love your channel. Would prefer using original paint colors. the silver for this one, and red for others, is not good looking I think.
Nice work
This is fuckin' hypnotic. I can't quit the video once started. 🤔🤣
Отлично))))
The part numbers for the bearings are 6202z and the shaft seal is 20x30x7 for those of you who's aerator pump died like mine did
A little bit fast sometimes but awesome work, as usual !
Good work 😚😚😚😚❤❤❤❤❤
Good 👍👍👍
Nice👍
🤗
When you will upload your next video?
neat video, but that silver colour is no good... also what kind of shape is that capacitor in?
true, It looks like a slicer
Я бы перед сборкой проверил конденсатор ESR-metr.
Porque você não pinta de outras cores
не такой он уж и старый был для реставрации, я так каждый день что-то реставрирую. Пыль протер- отреставрировал
Nice
NIce. But don't get it how " I will use it for dust collection system in my workshop."?????
👏👏👏👍👍👍👍
Tragen Sie immer speziellen Wickellack. wenn ein alter Motor renoviert wird
wow another cpu cooler i think
Helluva cooler
кхе кхе, не боюсь показаться незнающим, что это за сей агрегат? воздух засасывает, проходит через фильтра и на выходе чистый воздух выгоняется? На турбину похоже. Для чего эта штука нужна?
No, switch? Did I miss something?
Hammerite paint would have given the finished paint look tons of "Western Quality" that an original Chinese tool never had. I would have tapped out or filled the small dents in the junction box cover and the small fan cover, too.
Taiwanese, not Chinese.
@@douro20 My reference was more to quality than country of origin. Taiwan just supports my point.
It sound like an ambulance
Eddy Metal DIY subscribe to Duy Xuân TV
자꾸 보게되네
0:02 пока начал смотреть это удовольствие скажу сразу видос супер по полной. Ну кароче приятного всем просмотра👍👍👍
Кароче, только корпус шлифанул. А так все рабочее
А где он используется?
@@timurgimt5483 Везде,где нужен воздух и вакуум
@@AlekseiVasilich А какое максимальнольное давление?
@@timurgimt5483 Не могу сказать.Но в типографском оборудовании используется точно
@@AlekseiVasilich That explains all the ink coming out of the filters when cleaned.
You need to use a steel hammer for the impact screw driver to function.
6:58 حي على الصلاة حي على الصلاة
Bom dia Like
cordless drill machine ripare
Not bad
👍🏻👍🏻👍🏻👽
9:14 OOOOWA
I can see the bearing being the first problem to pop up
That's the most common failure mode of this type of blower.
good video but i would like that you had used new bearings
Good 🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷
😎😎👌👌😎😎👌👌😎😎
wow 11:38
Sandblasting would probably save you some time
Maybe 37 people can buy a new ring blower by their parents money....
Ma scusa , come pretendi di asserire che hai messo a "nuovo" la pompa senza neppure aver cambiato un cuscinetto ne il condensatore elettrolitico??? Al massimo puoi dire che l'hai riverniciata.
👏👏👏👏👏👏👏👏👍👍💯💯🇧🇷
9:15
все хорошо, но с подшипниками он сурово....
А реставрация то где?
Great job but..can you make the film little bit longer? Show us little bit more, please
What, you've run out of things that need restoring?
Вот нравится мне когда старой технике дают вторую жизнь сам тем же увлекаюсь
а почему ты решил что она старая?
Не такой то уж он и старый
Sign up for your channel, thank you very much
Those running a blacksmiths shop would have that off you straight away...
I like when in restoration they "restore" the item, like for example painting it back to a paint similar to the old one...
That's not a restoration, that's just a PAINT JOB !
I usually don't comment on "restorations" like this, but I have to agree... it really was just a cleaning and a paint job. You didn't remove the stater and test it, you didn't show any work done on the armature, and you didn't (I assume) replace the brushes so i wouldn't even consider this a tune up and no "body work" was done. Furthermore, the "poor-mans chrome" paint is usually a very poor choice. It looks cheap. A dark green or blue would have been a much better choice (IMO). On a positive note, i appreciate when anyone takes old tools and gives them a second chance, but you gotta call it like you see it. This simply IS NOT a restoration.
Yo desarmo una plancha y despues me sobran tornillos jajajaja
Do you have an email address? I’d like to contact you about something
dont change the motor