One thing I like about this channel is that Paul doesn't edit out all his mistakes and mishaps. It's more like a real life video instead of a fake edited youtube video. We actually get to see some of the mistakes we all make!
Noticed the small o ring was missing off the top of your accelerator pump tube? That won't help. Shovels are finicky, the carb needs to be spotless, make sure your plugs are gapped at 40 and check your pilot jet... get it right and you'll love it! Been riding mine daily for 35 years .
welcome to the world of ethanol fuels! e10 starts to break down with in 10-14 day of delivery. my guess the tank wasnt full and it was in storage where it was very humid and the e10 draws the moisture out of the air. when you store it fill the tank and add a good stabilizer. keep making these cool video!
Ethanol is real hard on small engines/motorcycles. It brakes down in only a month or two and causes big problems. Eats rubber gaskets and such. Worth picking up some non ethanol 93 if they offer it in your area especially if the bike is going to sit for any amount of time
I can get 90 octane non ethanol by the lake, but it's pretty out of the way for me as much as I ride. I think this was more an issue of a contaminated gas can, seems to be doing ok now
All that sediment in the carb is ethanol buildup. With all this new gas (excluding rec fuel) has around 5-8% ethanol in it when it sits for awhile it’ll solidify and gunk up carburetors bad. Rec fuel is old school 0% ethanol
there should be a threaded hole on bottom side of front rocker box that a brace should go to back side of air cleaner backing plate to hold it all up that is ome is the screw adj. properley on acel. pump what low speed jet .028/.0295 HAPPY TRAILS
I cut this out, because you couldn't hear me over the wind noise, the accelerator pump is backed all the way off. I took it for another ride later, I richened the idle mix a 1/4 turn and gave the pump a little bit more, and it seemed much better. Still some more to do
Dude. I wouldn’t have put that gas in my lawn mower. Heck I wouldn’t have put it in my 01 pick up. Love the honesty of these videos. I’m hooked. I have my old bikes put away in the trailer for winter and it’s killing me.
Glad you are able to ride the thing now without too many worries of it letting you down. Good job man. You are a better mechanic than I will ever be)))
My son bought a Suzuki for his first bike cheap. Needed carbs gone through. Drained tank emptied all fuel from bike. Filled with fresh gas. It took 3 weeks to get part and another week waiting to work on it. Almost exactly one month fuel had turned to crap. Smelled bad and had looked like really fine yellow sand in bottom of tank. I remember when I was a kid getting gas from anywhere lord knows how old to ride our mini bikes never had a problem. Good luck with everything bud you take care and stay safe.
Between those o rings and the inside of that carb it looks like it was molested by whatever came out of those tanks. Good job getting her cleaned up and back to running down the road and as for that rooster...
Keep up the good fight. Love the videos. I had the same fuel issue. New tanks and murky fuel. I figured out it was the gas station, which is now closed. They’re tanks were really bad.
You likely did put in some old gas or gas from a contaminated can. It sure looked like there was some water in there. I wonder if running the torch over those tanks could have caused that much condensation which over time rusted the tank? Aftermarket tanks are usually made from very cheap steel & prone to rust. Original tanks never used to be lined, but every aftermarket tank I look at recommend to line them. So, instead of buying a tank I found a local guy to clean out & epoxy my original. Anyways, so far, so good! Keep it up.
My guess is I picked up a junky old gas can that had been sitting a long time and didn't realize it. We had a lot of cans at the old shop and were in the middle of moving when I filled the tanks, so, it's possible! As always nice to hear from you
Those front calipers are fairly simple, crack them in half and pull the pistons. As long as there isn't corrosion inside, which you can fix, just a quick clean with alcohol or the brake fluid you plan on useing, don't use anything else, a new seal and dust boot, check that the pads slide easy and put them back on, maybe $10.00 each?
I'll probably end up replacing them, I took them apart last month and they look utterly terrible inside. I feel a lot better about sinking a little more money into this bike after actually riding it and having a smile on my face!!
Live and learn . Clean the tanks no smell of gas warm the tanks with a rose Bud . 100% dry then coat the inside . Follow Directions . One Day at a time Bud 👍
When I got my bike yeah it was Rusty inside a used 45 percent vinegar. And lots of nuts and bolts in a couple of weeks I mean it's not perfect but the flakes ain't coming off anymore and contaminating up my filter....
Believe it or not but I put moter oil in my tanks after I clean them. Rinse with gas then fill with gas and ride. And yes you need the carb support bracket. Shovels have there own rules. Ride and enjoy. Also in line fuel filter can't hurt either.
Ethanol, dude. It’ll leave water in your tank if it gets any oxygen, and eat more seals than a great white shark. Don’t underestimate how bad that stuff is for a carbureted bike. If it’s not your daily, get some gas at a marina for storage.
@@jamesorth1521 You're a lucky man! I feed all my bikes, my car, even the lawnmower non-ethanol high test. I don't have problems with it, but it sure is spendy.
That was A fun ride ...Felt like i was right there with ya...Great video,Attitude and Patience..i've followed on several of the video's of this bike..Great content ..I appreciate it alot..love those shovel's...But you would be Dr, Frankenstein the Bike is The Monster for sure lol but im Happy your finally getting it there for sure...Awesome video
Work the bugs out once you do no trouble head tanks r not the the shovelhead lol motor, do your tanks in red kote ,do not use kream shit it will fall trust me ,red kote is the best been doing mine for the couple builds with no problems at all! Calipers are full of old brake fluid it becomes to be like jelly. Clogged buddy carburetor is ethanol fuel e85 that is exactly what that is.and you need a support bracket for your carb to stop that from moving or it's just going to come unsealed again. Just helping you out.
I may try it, I've never had a problem with gas sitting for months on end, I honestly think I poured from a contaminated fuel can. We'll see how it looks in a few weeks!
What kind of rear fender are you looking for? I have both fenders off of a 1983 FXE. They're both in good shape if I recall correctly and are just hanging on the garage wall.
Paul. You live in tbe US and have a '73 Shovel which gives you endless. I live in the UK and have a '73 Triumph 750 Tiger which gives me endless. Fancy a swap? 😆
Just found your channel. Re the front brakes - why not strip them, clean all the lands and fit new seals. Will probably sort them out and cheaper than new callipers. Curious to know what ignition you are running - presumably points.
Always an epic feeling to take the first ride. I just got back from my 800 plus mile round trip on mine and have more stuff to do to it now. But it didn't leave me stranded though. What ignition are you running?
One thing I like about this channel is that Paul doesn't edit out all his mistakes and mishaps. It's more like a real life video instead of a fake edited youtube video. We actually get to see some of the mistakes we all make!
I make plenty of them 🤣
Noticed the small o ring was missing off the top of your accelerator pump tube? That won't help.
Shovels are finicky, the carb needs to be spotless, make sure your plugs are gapped at 40 and check your pilot jet... get it right and you'll love it! Been riding mine daily for 35 years .
This is awesome :) I haven't ridden a Harley in over 20 years now. Really cool to see this one out for a ride :)
Thats AWESOME man, glad its coming together and i am glad you are excited about the Shovel again! Grateful that I and my club could be a part of it.
Thanks Chris, really, y'all went above and beyond to help this poor boy out 🤣
Glad we could get it to you!@@buttcrackcycles
Really appreciate it
Sounds good glad to see you more upbeat,Yeah we all get to know our Shovels really well, they are fantastic teachers. Keep it up.
Yup, glad I took a break from it!
welcome to the world of ethanol fuels! e10 starts to break down with in 10-14 day of delivery. my guess the tank wasnt full and it was in storage where it was very humid and the e10 draws the moisture out of the air. when you store it fill the tank and add a good stabilizer. keep making these cool video!
Good video.
And it's great to see someone taking the time and making the effort to put old iron back on the road.
Ride safe.👍
Appreciate you watching and thanks for the kind words
Ethanol is real hard on small engines/motorcycles. It brakes down in only a month or two and causes big problems. Eats rubber gaskets and such. Worth picking up some non ethanol 93 if they offer it in your area especially if the bike is going to sit for any amount of time
I can get 90 octane non ethanol by the lake, but it's pretty out of the way for me as much as I ride. I think this was more an issue of a contaminated gas can, seems to be doing ok now
All that sediment in the carb is ethanol buildup. With all this new gas (excluding rec fuel) has around 5-8% ethanol in it when it sits for awhile it’ll solidify and gunk up carburetors bad. Rec fuel is old school 0% ethanol
there should be a threaded hole on bottom side of front rocker box that a brace should go to back side of air cleaner backing plate to hold it all up that is ome is the screw adj. properley on acel. pump what low speed jet .028/.0295 HAPPY TRAILS
I cut this out, because you couldn't hear me over the wind noise, the accelerator pump is backed all the way off. I took it for another ride later, I richened the idle mix a 1/4 turn and gave the pump a little bit more, and it seemed much better. Still some more to do
Yes love the honesty we all make those mistakes when no one is looking.
If anybody says they never screw up they're lying
Dude. I wouldn’t have put that gas in my lawn mower. Heck I wouldn’t have put it in my 01 pick up. Love the honesty of these videos. I’m hooked. I have my old bikes put away in the trailer for winter and it’s killing me.
There should be a bracket between the air cleaner and the Rocker Box
A bracket got added during this episode if you watch long enough. I realize most people stop watching after a few minutes.
👍😎👍
Ya got to ride it ...cool..
And it didn't catch on fire! Seriously I was thinking about taking the extinguisher out of my blue car and putting it in my hoodie pocket
Glad you are able to ride the thing now without too many worries of it letting you down. Good job man. You are a better mechanic than I will ever be)))
I used POR-15 Tank Sealer Kit to get rid of the rust and seal my tank 15 years ago, it's still holding up well today.
I use the Caswell tank sealer because of recommendation from a guy at WTT museum. Works amazing! Expensive but i dont think it will ever fail.
Nice I'll definitely keep that in mind, thanks for the suggestion
My son bought a Suzuki for his first bike cheap. Needed carbs gone through. Drained tank emptied all fuel from bike. Filled with fresh gas. It took 3 weeks to get part and another week waiting to work on it. Almost exactly one month fuel had turned to crap. Smelled bad and had looked like really fine yellow sand in bottom of tank. I remember when I was a kid getting gas from anywhere lord knows how old to ride our mini bikes never had a problem. Good luck with everything bud you take care and stay safe.
I had one of those in line filters on my 84 Softail. Gas kept getting vapor bound (?) either that or one of your jets are still gooped up.
Now that you're a Shovel owner you need to stock up on lock-tight, it will be a good friend, and use it on just about everything.
Between those o rings and the inside of that carb it looks like it was molested by whatever came out of those tanks. Good job getting her cleaned up and back to running down the road and as for that rooster...
Keep up the good fight. Love the videos. I had the same fuel issue. New tanks and murky fuel. I figured out it was the gas station, which is now closed. They’re tanks were really bad.
Sounds like a similar situation!! Thanks for watching
You likely did put in some old gas or gas from a contaminated can.
It sure looked like there was some water in there.
I wonder if running the torch over those tanks could have caused that much condensation
which over time rusted the tank?
Aftermarket tanks are usually made from very cheap steel & prone to rust.
Original tanks never used to be lined, but every aftermarket tank I look at recommend to line them.
So, instead of buying a tank I found a local guy to clean out & epoxy my original.
Anyways, so far, so good!
Keep it up.
My guess is I picked up a junky old gas can that had been sitting a long time and didn't realize it. We had a lot of cans at the old shop and were in the middle of moving when I filled the tanks, so, it's possible!
As always nice to hear from you
Those front calipers are fairly simple, crack them in half and pull the pistons. As long as there isn't corrosion inside, which you can fix, just a quick clean with alcohol or the brake fluid you plan on useing, don't use anything else, a new seal and dust boot, check that the pads slide easy and put them back on, maybe $10.00 each?
I'll probably end up replacing them, I took them apart last month and they look utterly terrible inside.
I feel a lot better about sinking a little more money into this bike after actually riding it and having a smile on my face!!
Live and learn . Clean the tanks no smell of gas warm the tanks with a rose Bud . 100% dry then coat the inside . Follow Directions . One Day at a time Bud 👍
When I got my bike yeah it was Rusty inside a used 45 percent vinegar. And lots of nuts and bolts in a couple of weeks I mean it's not perfect but the flakes ain't coming off anymore and contaminating up my filter....
Those gas tanks look like WX Split tanks from Lowbrow customs. I'm glad your Shovel is running better.
They are
Been riding Shovels since 1973. If set up correctly they can be dependable.
Whoo hoo
🐔 Yeah baby I’m in this video too.
Very cool bike buddy. Keep up the good work. If I wasn't a pain to work on everyone would do it. Good luck
🤙
For sure, feels good!
Believe it or not but I put moter oil in my tanks after I clean them. Rinse with gas then fill with gas and ride. And yes you need the carb support bracket. Shovels have there own rules. Ride and enjoy. Also in line fuel filter can't hurt either.
Interesting on the motor oil, I'll keep that in mind
Coat the tanks. For sure.
Ethanol, dude. It’ll leave water in your tank if it gets any oxygen, and eat more seals than a great white shark. Don’t underestimate how bad that stuff is for a carbureted bike. If it’s not your daily, get some gas at a marina for storage.
All I have ever run in my 1998 Evo is ethanol gas. Trouble-free.
@@jamesorth1521 You're a lucky man! I feed all my bikes, my car, even the lawnmower non-ethanol high test. I don't have problems with it, but it sure is spendy.
That was A fun ride ...Felt like i was right there with ya...Great video,Attitude and Patience..i've followed on several of the video's of this bike..Great content ..I appreciate it alot..love those shovel's...But you would be Dr, Frankenstein the Bike is The Monster for sure lol but im Happy your finally getting it there for sure...Awesome video
Haha I can't be a doctor, I dropped out of school 🤣🤣 but seriously thanks for following along with this project
@@buttcrackcycles 😂😂😂 Absolutely 👍
Ethanol fuel absorbs water from the air.
Don't worry about the rooster lol. Doesn't bother me or anybody else lm sure.
🤙
He sure bothers me though 😅
@@buttcrackcycles we can tell.
😜
@@buttcrackcycles I like the rooster. He reminds me that you're an everyday guy like the rest of us. Regards
Well done mate
Thank you
Work the bugs out once you do no trouble head tanks r not the the shovelhead lol motor, do your tanks in red kote ,do not use kream shit it will fall trust me ,red kote is the best been doing mine for the couple builds with no problems at all! Calipers are full of old brake fluid it becomes to be like jelly. Clogged buddy carburetor is ethanol fuel e85 that is exactly what that is.and you need a support bracket for your carb to stop that from moving or it's just going to come unsealed again. Just helping you out.
By this point you might as well name the bike Little Black Rain Cloud
That's actually a very funny name for it! I like it
K-100 or stabil my man. If you know its going to sit for more than two weeks drop a dose in. Save you alot of heartache in the long run.
I may try it, I've never had a problem with gas sitting for months on end, I honestly think I poured from a contaminated fuel can.
We'll see how it looks in a few weeks!
@buttcrackcycles that very well could be it! Funny how perishable gas is but I'm looking forward to it
What kind of rear fender are you looking for? I have both fenders off of a 1983 FXE. They're both in good shape if I recall correctly and are just hanging on the garage wall.
Its fine just put 100.miles on it it will cleare it self up
Paul. You live in tbe US and have a '73 Shovel which gives you endless. I live in the UK and have a '73 Triumph 750 Tiger which gives me endless.
Fancy a swap? 😆
That ain’t creek water…. That’s more like crick water!!!
There you go! You're talking my language!
Use high test for 1 tank full
paul, did you look in the tanks before you put gas in them? i'm not sure what you mean by "new". they could have been on anybody's shelf for 20 years.
Just found your channel. Re the front brakes - why not strip them, clean all the lands and fit new seals. Will probably sort them out and cheaper than new callipers. Curious to know what ignition you are running - presumably points.
It's still points.
I actually ordered the parts to attempt to rebuild them, stay tuned!
@@buttcrackcycles - will do. I just retrofitted points onto my Evo - love running bikes on points.
hellz yeah!!
🤘😎🤘
It's alive!
@@buttcrackcycles s0unded s0lid cept fur dat lil sputter.
🤙
Need a carb support bracket 5:04 😮
I put one on later in the episode
Always an epic feeling to take the first ride. I just got back from my 800 plus mile round trip on mine and have more stuff to do to it now. But it didn't leave me stranded though. What ignition are you running?
That sounds like an awesome trip man! Love to do something like that soon. Still running stock points
@@buttcrackcycles Here too. To me it goes to show that points work just as well.
I had a seat like that on my 67 back in the day.
Did you ever get your money back on the corbin?
I did, I thought I mentioned that at some point, but I might have forgotten to
Why is he worried about everything just drive it
Let's be frank, you bought a basket case AMF Harley. Did you think it was going to be easy?
Drive it like a man don go to slow