Parabéns pelo trabalho!! Linda faca! Isso prova que não precisamos de muitas ferramentas para fazer uma belíssima faca! Mas eu não diria que é uma clássica Bowie. Parece mais uma Big Hunter!!! Faltou o clássico e imprescindível Clip Point. 👏👏👏
Very well executed piece, your work methods are similar to my own and quite effective. One thing to note is burnt in tangs should be secured with a pin, epoxy does not stick to ash and can lead to a loose blade.
One of the single best YT Videos I've had the absolute pleasure of watching--Kudos Sir for exemplifying good-old-fashion American Ingenuity! God Bless.
Well done! It looks great. I can't wait to make my first Bowie, but I'm working my way up from smaller knives. I just got my forge up yesterday. Cheers.
nice work dude.......most people just don't know how much work and time .....it takes to make a knife like that !......keep up the good work and videos :)
So... DIY-workshop-dubstep is a thing @8:24 ... who knew ;) Really nice video, and really nice knife, excellent work !!! Best regards, Mark (from Denmark)
Your anvil is absorbing too much of the force your hammer, because it doesn't have enough mass under the face of the anvil. weld some supports under the unsupported parts of the I-beam
I have the basic grinder like yours but you modified one side to accommodate the belt sander set up. How did you do that and are the parts available to modify mine like that? Thanks. Ray ( from Buffalo NY ).
DonutAssassin it is, and if you wanted to start forging I would recommend to start with a small forge. You don't have to make it but there is so much satisfaction that comes from building it your self. I made my first forge out of an old empty fire extinguisher. There are definitely some basic things to learn but it can be a very helpful skill in the future. Once you get the hang of it, it becomes a second nature. But yes it is so much fun and even therapeutic at times.
Go for it. Looks like all you need is files, jig saw and a good belt sander. I've seen the tempering done with a propane torch and cooking oil. Just saying.
awesome video Iv'e been watching a lot of these on swords and and such and this guy has the crudest methods and builds the most beautiful shit. Iv'e never done any shit like this so it's sunday and I'm going to try it. Inspirational
Beautifully made knife with an equally impressive sharpening. Maybe you can now sell it & treat yourself to a new drill. In your vide clip; it looked lie your old drill has seen better days ( chuck no longer running concentrically. very well done. Kind regards,
Late reply but that's cool you collect knives. Sylvester Stallone collects knives and there is a new Rambo film being filmed right now. I'm fired up on what the new knife will look like. As a collector, do you have any information on it? Peace!
Wow... he just did it. No special tools, no fuss. Just did it. No excuses for not having a complete metalworking shop.
But I have complete metalworking shop 😊
@@MarekTabi I dont... and now I dont have any excuses. (Sorry... talking bout myself)
Thanks for comment 👍😊
This is cool because he did it all with basic tools. He didn't need a whole blacksmith shop with a huge forge and a power hammer, etc.
his "anvil" isn't very secure which could become a problem
Ahhhhh fresh baked Bowie. Just like grandma used to make
Really nice knife you made, with simplicity to perfection. Thanks
A beautiful blade. Excellent craftmanship. One can only learn from men of your calibre.
Parabéns pelo trabalho!! Linda faca! Isso prova que não precisamos de muitas ferramentas para fazer uma belíssima faca! Mas eu não diria que é uma clássica Bowie. Parece mais uma Big Hunter!!! Faltou o clássico e imprescindível Clip Point. 👏👏👏
Brilliant job! So skillfully done, with a truly professional and masterful result.
.
Love it Man! Just goes to show one does not need fancy tools to make a good knife, just ingenuity! Nice Knife!
Loved watching this! Thanks. Very therapeutic.
Quality!!! I love that knife! Respect! From England.
Wife: Honey, what are you baking?
Him: leaf spring
Very well executed piece, your work methods are similar to my own and quite effective.
One thing to note is burnt in tangs should be secured with a pin, epoxy does not stick to ash and can lead to a loose blade.
So beautiful. Man, forging a knife is so much work. Very nice indeed.
One of the single best YT Videos I've had the absolute pleasure of watching--Kudos Sir for exemplifying good-old-fashion American Ingenuity! God Bless.
this man makes some of thee best knives i have ever seen, but geez can he bolt down his tools properly, lol, great work though!!!
i almost grabbed my drill and some screws haha
Well done! It looks great. I can't wait to make my first Bowie, but I'm working my way up from smaller knives. I just got my forge up yesterday. Cheers.
Very clever way to make the handle fit. I like it. Plus you don't get any handle wiggle.
Now this is knife making! If the disc sander wasn’t wobbling i would have questioned your resolve.
nice work dude.......most people just don't know how much work and time .....it takes to make a knife like that !......keep up the good work and videos :)
Sharp and shiny just how I like it
Cool video. Cool knife. I'll take a dozen.
So... DIY-workshop-dubstep is a thing @8:24 ... who knew ;)
Really nice video, and really nice knife, excellent work !!!
Best regards, Mark (from Denmark)
Nice job.just goes to show,...anything can be made with the most limited tools
That's a great Idea, using your vise to file a straight edge. May have to borrow that one.
Your anvil is absorbing too much of the force your hammer, because it doesn't have enough mass under the face of the anvil. weld some supports under the unsupported parts of the I-beam
Fantastic job! Beautiful knife, must hv cost alot of money to obtain one. Thanks for showing us how to make.
a very well made knife,it will certainly do what it is Intended to do,I hope I'm not the intended targets. gets my thumbs up
Wow, another great work, and awesome knife. Bravo.
Kopriva Kopriva а что между двумя бронзами?
Amazing job !
Great job working with the minimal tools you have.
I have the basic grinder like yours but you modified one side to accommodate the belt sander set up. How did you do that and are the parts available to modify mine like that?
Thanks. Ray ( from Buffalo NY ).
Ray McConnell i have the samd grinder what do you mean?
Same*
One of the nicest blades I've see in a long while... Well done pal my goal is to make one just like that
Beautiful work!
It seems so fun to do this sort of stuff.
DonutAssassin it is, and if you wanted to start forging I would recommend to start with a small forge. You don't have to make it but there is so much satisfaction that comes from building it your self. I made my first forge out of an old empty fire extinguisher. There are definitely some basic things to learn but it can be a very helpful skill in the future. Once you get the hang of it, it becomes a second nature. But yes it is so much fun and even therapeutic at times.
Go for it. Looks like all you need is files, jig saw and a good belt sander. I've seen the tempering done with a propane torch and cooking oil. Just saying.
Great looking Bowie by the way.
What a beautiful knife in the world really...:)
LAVORO ECCEZIONALE. CON POCHE E SEMPLICI ATTREZZATURE HAI REALIZZATO UN COLTELLO BELLISSIMO E FUNZIONALE. COMPLIMENTI.- 10+++
Наковальню прижал камнями, огонь
that is one really nice looking knife. You do excellent work!! Thanks for sharing!!
very nicely done....one critique though.... the handle needs pins very weak with just epoxy.
Es lo más parecido al bowie de cocodrilo dundee que buscaba para fabricar gracias por el video
Brilliant,beautiful knife.
awesome video Iv'e been watching a lot of these on swords and and such and this guy has the crudest methods and builds the most beautiful shit. Iv'e never done any shit like this so it's sunday and I'm going to try it. Inspirational
Very nice job with knife and video editing!
another work of art.
Beautiful knife. Love the blade design and the half handguard.
You have a special talent....great job!
Beautifully made knife with an equally impressive sharpening. Maybe you can now sell it & treat yourself to a new drill. In your vide clip; it looked lie your old drill has seen better days ( chuck no longer running concentrically. very well done. Kind regards,
The handle is glued to the blade? In all other knifes you used metal pins to fix the handles.
That old school drill-stand sander is awesome! Beautiful knife mate.
The best knife i ever Sean in youtube
I love this sort of stuff. Keep up the good work!
That was Freaking amazing... You need to apply for Forged in Fire... Brilliant!
Thats just way cool Mate
Very nice knife
I love so much this handle shape
Oh my! I love that knife! I collect knives and that one is on point!
Late reply but that's cool you collect knives. Sylvester Stallone collects knives and there is a new Rambo film being filmed right now. I'm fired up on what the new knife will look like. As a collector, do you have any information on it? Peace!
Hodně dobrá čistá práce, jak nůž tak video!
Wonderful job 👏
Beautiful work
Hermoso trabajo . Felicitaciones
Beautiful knife, congratulation, saludos desde la Ciudad de México , sorry but my english is not very good
nice as always :) You could sign your knives, make them from stainless steel and sell!
congratulations... beautiful knife!
Nice work Marek
That's a pretty knife
Very nice 😮👍👌
Hello, What type of abrasive tape do you use for shaping and finishing? Thank you in advance for your answer.
You are an artist sir
David would be proud ❤❤
if you put a magnet on you "anvil" it will reduce the ring
Awesome knife!
i thought that newspaper scabbard was pure class
That was really fuckin sick! He does an incredible job.
How powerful is your belt grinder ? How many Watt ?
Wonderfull knife Marek!!! Greetz...
I know I'm impressed! 😁
basic tools...top result
Nice work
I would think that the glue would eventually give out and that tang will loosen, maybe a rivet or two could help.
YES RIVETS ARE GOOD BUT A NICE KNIFE THOW
omg dude. amazing work thats a beautiful knife. Greetings from Brazil.
good job boy !
Works of art
His neighbors love him!
El trabajo perfecto, pero para mí gusto, se podría haber terminado con tres remaches pasantes en la empuñadura, para que ésta no se salga.
Lavoro di buona fattura,mà il fodero?come lo porti,sempre in mano?oppure visto come è affilato lo metti nei pantaloni o in cintura?pensaci....
Fine work my friend.
That was amazing! Great work
really enjoy your work, thanks.
thanks :)
Epic ! looks brilliant
Great job Marek!
Good job, it look's great
Muy buen trabajo.
Felicidades..
I have to ask, your forge, where did you find that firepot?? I like the looks of it
great job
Badass brother
Great blade. I do prefer a good ricasso on larger blades tho.
great effort.
Very nice...
it is really good and cool .