7018 2G Practice Plate - for Welding Students
Vložit
- čas přidán 20. 08. 2023
- weldmongerstore.com/blogs/wel...
Visit my store at weldmongerstore.com for TIG cup Kits, TIG Fingers, Gloves, DVDs, and other quality welding tools. New products being added weekly.
this is a 2g practice plate with 6010 root and 7018 fill and cap.
Join the discussion with thousands of welders at the Welding Tips & Tricks forum
forum.weldingtipsandtricks.com - Jak na to + styl
I love welding, so many obstacles but i can't give up on it.
Jody sir, you taught me more than my instructors, I work in the shipyard, love from India.
I’m glad your still doing this Jody I hope you know this is not a thankless Channel. I’m glad you’re posting regularly again if not for your info over the last 10 years When I started welding I wouldn’t be the welder I am today. Tho I gave up on welding as a career the mechanical aptitude it provided me was invaluable and I thank you for your time and information. The terrible jobs I had welding gave me a lifetimes worth of useful knowledge and helped pull me and my family out of poverty and secure a good career. Always a pleasure to see a real informative creator on the platform.
I am posting 30 videos in 30 Days for August …customer appreciation month at weldmonger.com. Lots of deals and giveaways going on too but you will need to sign up here weldmongerstore.com/blogs/weldingtipsandtricks/wm-blitz-video-1-30-videos-in-30-days
Your videos of the puddle are so amazing. You’ve got a good setup and it helps to see it way better than any videos I’ve seen. Thanks!
The visual demonstrations in this video are excellent.
Thanks for the great lesson today on the practice plate Jody . Always enjoy watching the How To videos on stick welding. Fred.
Super vidéo très instructive,comme d'habitude.
Merci
Thanks for the video and information Jody great video ❤❤❤👍👍.
Thank you so much.
Your funny brother, I could hear you back there…here hang on “let me zoom out just in case” (the dang weld sucks) 😂 looks like I’m the only one who caught that, made the video for me
I would love to see you do a video on round pipe hand rail joints, stick and mig
I like welding work so mutch
Thanks
I’m doing an assignment in school with 7018 1G open root , 3/32 gap, 1/16 landing. Can’t find any videos on it anywhere.
Didn’t want to get it flush before the cap?
first, let me start by saying how much you have done for the average tradesman hobbyist welder is awesome thankyou so much for the informative content and all the work you have put in. i have a question I have always wondered what is how to calculate the necessary amount of weld on a joint say for roll cage intersections of which i know there are infinite amounts but how to tell if you have at least met the minimum spe for nominal strength in a single weld joint for instance a 90 deg tube to another intersecting it. say 1/8 inch wall, for its profile would it be for the legs of the weld where they flow into the other tube to be the same as the wall thickness or slightly more than the wall thickness. may be a little confusing but I am curious if there is a formula for figuring the minimum required width of the weld bead both height and width? a guy always wonders if it is substantial enough to take the proper load rating of the tube. you see guys welding chromoly roll cages and their weld beads are incredibly small most of the time which makes one think he is putting excessive heat and weld beads on a structure that doesn't need to be there? thanks again you are the best and have really gotten me through a lot of situations where I might not have figured out a solution for that certain predicament, thank you again.
Big beads don't make better welds.
Penetration, and heat affected zones are what makes it work.
And why most roll cages are TIG welded. It's easier to control the zone and the penetration.
There are formulas, but they're decided by the people that do the drawing, if you're welding to spec... and experience if you're not.
It's all a part of the trade.
Stringer only sir?
What's the setting on the machine?
Biggest pain to me has been that last cap pass on that top edge. Seems like it wants to sag resulting in slight undercut despite slight up and d down osolation with slight pause on the upper zig of the zag. Should i run cooler?
not recommended, only test I failed was from doing exactly what u r saying. Keep your welds on the small side to prevent sag
Jody sir, how can I practice pipe welding without pipes?
Just use beveled metal the same thickness you would with pipe and then just do all 4 positions and just getting comfortable and consistent with each position or a mix of positions.
Didn't seem like he was getting very good penetration on the side walls. He was more: filling the valley and the puddle was just kissing the sidewalls-- but he didn't seem to really burn into the sides-- until that final pass near the top edge. IDK, I like to really dig into the side wall myself, and make sure it adheres.
Isn’t an 1/8 too much iron to carry?
All depends on you Welder
🔥🔥🔥🔥🔥👍👍👍👍👍👍
👍👍👍👍🔥🔥🔥🔥
Vertical next please
With 1/8"
🛠🛠🛠👍🙌
I got arc flash watching video
WHY THE SHAKING HANDS ..GEE TWO HANDED AND STILL SHAKING ..THE JUICE IS TOO HIGH ..WHAT A BOLLOCKKS .