How to Bleed Brakes 2011-2014 Hyundai Sonata
Vložit
- čas přidán 25. 08. 2024
- Buy Now!
New Brake Chemical Kit from 1AAuto.com 1aau.to/iv/1AVC...
This video shows you how to bleed the brakes on your 2011-2014 Hyundai Sonata.
This repair was done on a 2013 Hyundai Sonata GLS 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2011 Hyundai Sonata
2012 Hyundai Sonata
2013 Hyundai Sonata
2014 Hyundai Sonata
Tools you will need:
• 10mm Wrench 1aau.to/o85/1AX...
• 11mm Wrench 1aau.to/o85/1AX...
• 21mm Socket 1aau.to/oaye/1A...
• 1/2 Inch Impact Gun 1aau.to/oxo/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obYM/1A...
• Torque Wrench 1aau.to/oa3h/1A...
• Brake Fluid
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oKS/1AX...
• Fluid Transfer Pump
• Gloves 1aau.to/oaNj/1A...
• Safety Glasses
• Drain Pan
• Floor Jack 1aau.to/oaqn/1A...
• Jack Stands 1aau.to/oacB/1A...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
this videos gonna help me my 13 sonata has been making grinding noises when braking for a little bit now, and yesterday, the petal began sinking to the floor and the brake warning light switched on. i think i need to change the rotors and pads on the back two wheels and bleed the brake fluid.
Do you have the bleeder bottle with that rubber end part ##
Why does the fluid appear to go back into the bleeder after you close it?
Is this with abs