EASY Steam Deck Case Swap!

Sdílet
Vložit
  • čas přidán 15. 06. 2024
  • Steam Decks are cool, but they look kind of boring - just black plastic. No gamer RGB or fancy color choices. And sure, you could just put a sticker on, but thats not exactly the same is it? Well, JSAUX sponsored this video to show you their new transparent cover series - a complete case swap kit for the Steam Deck that completely changes the aesthetics and adds a bunch of neat features that could make your deck run a little cooler. But is this case swap a simple job, or a nightmare surgery that isn’t worth your time?
    Purchase JSAUX Transparent Case Series w/ FREE Worldwide shipping (Use Code JASON for a discount!):
    JSAUX Official site: go.jsaux.com/3O9lb29
    Support me on Patreon: / jasonwitmer
    ⭐Follow Me!⭐
    TIKTOK ➔ / jasonwitmeryt
    TWITTER ➔ / jasonwitmer
    ⭐My Favorite Steam Deck / ROG Ally Accessories:⭐
    Valve Steamdeck:
    Amazon: amzn.to/3YqdhDt
    Valve: store.steampowered.com/steamdeck
    SSD:
    256gb SSD - amzn.to/3WgPqFr
    512GB Kingston SSD - amzn.to/45u3LUp
    1TB Inland SSD - amzn.to/45tO2oh
    SD card:
    SanDisk 1TB - amzn.to/3HFCmWd
    SanDisk 512GB - amzn.to/3hwSQoC
    Samsung EVO 512GB - amzn.to/3WAUvJV
    Amazon Basics 1TB - amzn.to/45svFA1
    Flash drive
    Sandisk 128gb Dual Drive - amzn.to/3VXkQkq
    Docks
    JSAUX Dock - amzn.to/3BC9cn0
    NIOVOO Dock - amzn.to/3OIqjuy
    JSAUX SSD Dock - amzn.to/45wx6xh
    USB-C Hub - amzn.to/3UXeno8
    JSaux stand - amzn.to/3Fr6EJm
    Bags
    Grey Bag - amzn.to/43vFDix
    Jsaux Sling Bag - amzn.to/43tjaCm
    Case -
    JSAUX Mod Case - amzn.to/45yJj4E
    JSAUX Backplates - amzn.to/3MyEUWH
    Headphones
    Anker Wireless - amzn.to/3jnIBnp
    Moondrop CHU IEM Ear buds- amzn.to/3FNbSiL
    Mouse/Keyboard
    Mouse/Keyboard controller thingy - amzn.to/3PT1vic
    Battery bank
    Baseus 65w - amzn.to/3BWBzvH
    Baseus 100w - amzn.to/3IIhMnI
    Charger
    Ugreen 100w charger - amzn.to/3URirqd
    Controllers
    PS5 - amzn.to/3Pss2CH
    Xbox - amzn.to/3uPvkX2
    Portable monitor
    Uperfect 15.6" Monitor - amzn.to/3YpPuEA
    Misc
    Right Angle USB-C Adaptor - amzn.to/3IGftS8
    Steamdeck Skins - amzn.to/3MACeb9
    Steamdeck Grip Replacement - amzn.to/3IBVgNh
    Steamdeck Thumb Sticks Replacements - amzn.to/3MDWN6y
    Steamdeck Screen Protector - amzn.to/3IGTsCq
    *Disclosure: I only recommend products I would use myself and all opinions expressed here are my own. This video may contain affiliate links that add no additional cost to you, I may earn a small commission. Thank you for your support!
    This video was sponsored by JSAUX, meaning there was an exchange of money for a video featuring their product - but like all of my videos, this NEVER means a dishonest review. Every sponsor of the channel must agree to provide me 100% full creative control and to give my honest opinion about any product - if it sucks, I tell my audience it sucks, whether the company pays or not. JSAUX, the sponsor of this video, agreed to those terms before any deals were made. Thank you to JSAUX for allowing creators like me to speak our mind in this medium.
    #steamdeck #consolemods #steamdeckgames
    00:00 Introduction
    00:27 Unboxing
    02:20 Replacing the shell
    03:51 Mistakes I made
    05:25 Installing Backplate
    06:03 JSAUX Feedback
    07:20 Is it worth it?
  • Věda a technologie

Komentáře • 89

  • @JasonWitmerYT
    @JasonWitmerYT  Před 11 měsíci +6

    Thanks to JSAUX for sponsoring this video! You can purchase the JSAUX Transparent Case Series w/ FREE Worldwide shipping (Use Code JASON for a discount!) here: go.jsaux.com/3O9lb29

  • @menuki95
    @menuki95 Před 9 měsíci +44

    Please don't take this the wrong way at all, but it's refreshing to see someone make that many smaller but non lethal mistakes, it makes me feel actually more motivated to tackle this replacement myself seeing it's really not that easy to break anything if you're a bit careful. Thanks for the great video! Still can't believe we have fully modifiable handheld PC's now its so cool...

    • @JasonWitmerYT
      @JasonWitmerYT  Před 9 měsíci +7

      No worries! I wanted to be honest with y’all and show you how to avoid the mistakes I made

    • @ChudDin
      @ChudDin Před 8 měsíci +2

      appreciate it we all make mistakes not hiding them makes you feel more human and makes this mod less intimidating i wouldve 100% upgraded the joysticks to hall effect ones while youre in there anyways @@JasonWitmerYT

    • @paulkendrick4153
      @paulkendrick4153 Před měsícem

      @@JasonWitmerYT Jist got my Deck. The fact I can play pretty much any game all the way to 360/PS3 is insane to me. Love showing it off at work to my older coworkers 😊 I literally Will never buy another main
      Brand consoles ever again. 😊

  • @mbk337
    @mbk337 Před 11 měsíci +9

    Great video. I was on the fence about getting this or just the back plate. I still am a bit leery, but knowing that the toughest parts are basically remove the screen and making sure all the stuff is secure; that really helps.

    • @JasonWitmerYT
      @JasonWitmerYT  Před 11 měsíci

      Glad I could help! Thanks for watching 🙏

  • @Nina.playdead
    @Nina.playdead Před 7 měsíci +1

    Took me an hour was easy! Yall got this ❤

  • @UCMan99
    @UCMan99 Před 6 měsíci +1

    great vid. just bought the purple case!

  • @smithktff
    @smithktff Před 11 měsíci +6

    Nice video. I'm hoping they eventually offer all the same colors they do for the back plates. The extra air holes over the fan are interesting. I'd like to see in depth testing to see how that changes the dynamics of the airflow. I wonder if it helps or hurts.

    • @xXYannuschXx
      @xXYannuschXx Před 9 měsíci

      I think Gamers Nexus already tested it and the results were not good:
      With the stock backplate the fan draws air through other components, that need cooling (like the SSD, VRMs or the RAM). With the JSAUX backplate, the fan now gets air directly, which results in higher temps of those other components.

    • @flavio1243
      @flavio1243 Před 8 měsíci

      @@xXYannuschXx CryoByte33 on his testings only noticed a 1 degree difference on the components between the jsaux and stock backplate, that sounds very neglectable for a boost in APU cooling performance.

  • @kirbsinoz
    @kirbsinoz Před 10 měsíci +6

    Great vid 👏🏼... they look awesome but there's no way I would even attempt this 😕

    • @luism8130
      @luism8130 Před 3 měsíci +1

      Same.. not risking destroying my $500+ device. I’m too clumsy for this anyway.

  • @DoomedMadhouse
    @DoomedMadhouse Před 7 měsíci +1

    Haven't watched fully yet but I'm getting a red transparent one this weekend, hopefully I can pull this off.

  • @adam33star
    @adam33star Před 11 měsíci +5

    Really impressed with these kits, they're definitely not going cheap. Am I the only one that doesn't have a hairdryer? Lol

    • @JasonWitmerYT
      @JasonWitmerYT  Před 11 měsíci +1

      Haha that’s why I said borrow one from your mom!

    • @toricostin243
      @toricostin243 Před 11 měsíci +1

      Literally me the moment he said hair dryer. "Wow the one thing I don't use or have.."

  • @makerarchive6502
    @makerarchive6502 Před 11 měsíci +1

    they need way more colors, would love a blue or red transparent case

  • @PolarBlairGaming
    @PolarBlairGaming Před 5 měsíci

    The organization and spare parts are above and beyond. I feel like it’s possible…still scared though.

  • @alexanderivarson856
    @alexanderivarson856 Před 8 měsíci +1

    They just need to make the full shell blue and not just the backplate and I am doing this! Good video bro. Subbed.

    • @JasonWitmerYT
      @JasonWitmerYT  Před 8 měsíci +1

      Cheers! They just released an all white version, so maybe we get blue soon

    • @alexanderivarson856
      @alexanderivarson856 Před 8 měsíci

      @@JasonWitmerYT hopefully

    • @JasonWitmerYT
      @JasonWitmerYT  Před 8 měsíci +1

      I painted the shell in this video to blue recently myself if you want to check it out. It’s a recent video

  • @TheDrsalvation
    @TheDrsalvation Před 10 měsíci +1

    I was going for this, but a screw in the motherboard wouldn't budge, I didn't want to risk ruining it, I tried the rubber band trick to no luck, and I don't have good pliers to manually unscrew it either. It was a bust for me. At least I was able to replace the face buttons, bumpers and triggers (but not the power and volume buttons. So I can just use a decal to cover the rest.

    • @calebbritannia6283
      @calebbritannia6283 Před 10 měsíci

      Were you using the screwdrivers provided? In my experience it is much better to use your own premium screwdrivers because cheaper ones can ruin the screws

  • @IIIIOTL
    @IIIIOTL Před 4 měsíci

    Thanks for the vids! I seen you've used the jsaux as well as the extreme rate one, i was wondering how they compare and the differences? I've used extreme rate before for my ps4 controller so I know they're reputable, just trying to decide which one to buy

    • @JasonWitmerYT
      @JasonWitmerYT  Před 4 měsíci

      I’ve actually never used extreme rates shell, but I’ve been using the jsaux one since this video and it’s been great! Thanks for watching

  • @100164
    @100164 Před měsícem

    Me, a bald man: a hair dryer?! God damn it!

  • @Labiote
    @Labiote Před 5 měsíci +3

    I thought it was an easy process. Oh boy I was wrong. Not for me I don't want to kill my brand new deck. Black is good lol

    • @Julian.padillaa
      @Julian.padillaa Před 2 měsíci

      Getting one with full translucent red 1t

    • @plant4170
      @plant4170 Před měsícem

      @@Julian.padillaai want that one too

    • @Julian.padillaa
      @Julian.padillaa Před měsícem

      @@plant4170 its really nice got over 40 hours on it already

  • @CuriousTinkering
    @CuriousTinkering Před 11 měsíci +2

    They have the better suction cup than extreme rate.

    • @MA-xd9zl
      @MA-xd9zl Před 9 měsíci

      the one extreme rate give is a joke, its small and not place to push securely...

  • @ellieebbesen6724
    @ellieebbesen6724 Před 9 měsíci

    What temp was the heat gun when you could finally remove the screen? Great video!

    • @JasonWitmerYT
      @JasonWitmerYT  Před 9 měsíci

      Surprisingly high haha like a 7/10 on the heat scale

    • @ellieebbesen6724
      @ellieebbesen6724 Před 9 měsíci

      @@JasonWitmerYTthanks for the reply! Do you know the exact temperature?

  • @squigl3z78
    @squigl3z78 Před 3 měsíci

    i should of just gotten the back shell lol

  • @chrislaustin
    @chrislaustin Před 11 měsíci +3

    "They included protection, but I'm American, so I'm just going to raw dog everything" LOL I would have choked if I was eating or drinking ATM.
    I don't own a deck yet, but I've done similar mods in the past to several PSP's and DS's, and so long as you go slow, no one should have any issues(it can be fun like building a huge Lego project). The PSP was pretty modular, and the only issue there was the UMD drive door, as you have to apply pressure to get it in and out. And the DS had one wire that went under this cramped space, and that was a pain, as was the ribbon cable for the top screen, but overall, easy enough.
    The Deck was actually designed with self repair in mind and while it has a ton of parts, the things provided here seem to make it super easy. I actually bought a Dbrand tear down skin for mine, and that still looks better to me than any of the clear cases do. But if I ever swap the screen for a better one(a company has one coming soon), then I'll probably swap the shell, as I'll have to go to bare bottom to swap the screen anyway at that point.

  • @milo_van
    @milo_van Před 9 měsíci +1

    it’s like DIY ifixit

  • @Stu2be2
    @Stu2be2 Před 3 měsíci

    Raw dog, Everything 😂😂😂😂

  • @frenchalcantara8424
    @frenchalcantara8424 Před 11 měsíci

    Does the vent in top of the fans affect the circulation or the temps? Coz that's kinda suspicious design choice.

    • @JasonWitmerYT
      @JasonWitmerYT  Před 11 měsíci

      Looking at other peoples testing; cutting a hole there can really help your temps lower

  • @rachaelbalasingham88
    @rachaelbalasingham88 Před 10 měsíci +4

    In the UK we would call those rubber pads a membrane.

  • @henry1667
    @henry1667 Před 10 měsíci

    Giving a shot like this is so risky, no thank you !

  • @vuitorico
    @vuitorico Před 8 měsíci

    Would this be easier to do this at the same time as upgrading the display?

    • @JasonWitmerYT
      @JasonWitmerYT  Před 8 měsíci +1

      Most definitely should do them at same time.

    • @vuitorico
      @vuitorico Před 8 měsíci

      @@JasonWitmerYT am I wrong in thinking that the factory display could stay attached to the factory front plate if I did this?

  • @ataxjax5225
    @ataxjax5225 Před 4 měsíci +1

    i want to do this but im scared im gonna screw something up

  • @Void_xplorer
    @Void_xplorer Před 10 měsíci

    I was wondering if I did not want to take the screen out couldnt i just buy a whole new screen?

    • @JasonWitmerYT
      @JasonWitmerYT  Před 10 měsíci +1

      You totally can! They actually sell an anti glare screen you can buy with it.

  • @joker-sh5hv
    @joker-sh5hv Před 26 dny +1

    TAKE OUT YOUR SD CARD BEFORE TAKING OFF SHELL

  • @babysully1791
    @babysully1791 Před 3 měsíci

    how did you get the back off???

  • @OkraPlutonium
    @OkraPlutonium Před 5 měsíci

    Subbed. The screen is the part that worries me the most and I won't have a heat gun for it...

    • @JasonWitmerYT
      @JasonWitmerYT  Před 5 měsíci +1

      Thanks! A blow dryer is more than enough!

  • @dattisha27
    @dattisha27 Před 8 měsíci +1

    i wish they would make they for the ally i would love to make my ally atomic purple

  • @nolan6846
    @nolan6846 Před 4 měsíci

    Are these compatible with the OLED ??

  • @TheWarcraftIII
    @TheWarcraftIII Před 6 měsíci

    6:20 I would call them membrane pads

  • @jaredtoney3417
    @jaredtoney3417 Před 11 měsíci

    I want to replace my original black steam deck shell with a black JSAUX shell.

  • @hobbsm666
    @hobbsm666 Před 10 dny

    Oh fk this.... Imma fk it up

  • @SanctumAsylum
    @SanctumAsylum Před 9 měsíci +1

    I tried this myself, and was able to replace the shell. However, the screen would no longer display an image. I bought a new screen, had the same issue. I sent it in for repair, they replaced the screen for a third time, and the issue persisted. There's a small chance that if you disconnect the screen, the software will not be able to reconnect to the screen when you plug it back in. Replacing the shell on your Steam Deck is 100% NOT worth it. You can do everything right, and you could still end up with an irreparable Deck.

    • @Ricjones1994
      @Ricjones1994 Před 8 měsíci +1

      I'm glad I'm not the only one having this issue. I'm in the same boat. No bios, no HDMI over USB C, everything. The last thing I might be able to think og is doing HDMI over M.2, but that's it...

  • @jazzawazza2033
    @jazzawazza2033 Před 8 měsíci

    I love how all youtubers use tweezers for the buttons they have guides just drop them in

    • @JasonWitmerYT
      @JasonWitmerYT  Před 8 měsíci

      Looks better on camera because my fingers are too big

    • @jazzawazza2033
      @jazzawazza2033 Před 8 měsíci +1

      @@JasonWitmerYT nah smash them in I also have fat fingers apparently gotta make it look gritty next time make it gritty and tag me

    • @JasonWitmerYT
      @JasonWitmerYT  Před 8 měsíci

      I’ll do my best bro 😎

  • @archer201977
    @archer201977 Před 7 měsíci

    Rubber Pads, Silicon Pads, but it differs from where i live (Philippines)

  • @Rick-ng3lr
    @Rick-ng3lr Před 11 měsíci +1

    No way. Not worth the risk. Looks cool though.

  • @sniper9961
    @sniper9961 Před 11 měsíci +1

    There is no way I'm doing this to my SD

  • @bigtimejones831
    @bigtimejones831 Před 10 měsíci +3

    I've destroyed electronics trying to do stuff like this. I'm gonna upgrade the the SSD but that's it. I can only see heartache in my future if I try this.

  • @erniecho
    @erniecho Před 8 měsíci +1

    I'm thinking of just changing the shell and not the touch pads.😂😂😂😂😂😂😆😆😆😆

    • @JasonWitmerYT
      @JasonWitmerYT  Před 8 měsíci

      This doesn’t replace the touchpads actually so you’ll be fine!

  • @barkevkaraoglanian9255
    @barkevkaraoglanian9255 Před 4 měsíci

    In what world is this worth it lmaooo😂

  • @adriansully6502
    @adriansully6502 Před 9 měsíci +1

    Raw Dog

  • @ameliabuns4058
    @ameliabuns4058 Před 6 dny

    OOOF that's just not worth it to me IMO. too risky too much work!
    I was thinking of spray painting my deck!

  • @Loknath009
    @Loknath009 Před 4 měsíci

    So basically if you want to screw up your steam deck, go ahead try this.

  • @KazeMunashii
    @KazeMunashii Před 10 měsíci

    except extremerate already beat them to the punch like two months ago, and they have gold chrome, race car chameleon, wood, etc, plus they also have button swaps. even at least two other companies have started making nvme docks two for half the price and more usb ports.

    • @iaincowell9747
      @iaincowell9747 Před 7 měsíci

      I have a extremerate clear purple, haven't got around to changing it yet.

  • @jonathaningram8157
    @jonathaningram8157 Před 3 měsíci

    nope, no way I'm doing that.

  • @JonathanTalksHW
    @JonathanTalksHW Před 11 měsíci

    What about the rog ally? I don't want to leave it on white which I know I like white but for me taking it with me on the go, I prefer black stuff when it is something I take with me cuz those would be the most used products and it will pick up nasty lint and would be visible on a white product.

    • @JasonWitmerYT
      @JasonWitmerYT  Před 11 měsíci

      Some companies have told me they are all working on making some ROG ally products 👀

  • @Twocrudedudes
    @Twocrudedudes Před 11 měsíci +1

    Looks great, but that's way too much work to be worth it to me. Shame.

  • @goofygoodpasture8511
    @goofygoodpasture8511 Před 2 měsíci

    The extra fan vents will actually cause the deck to overheat btw, the housing is specifically designed to pull aid over the VRMs
    s

  • @xXLoneSoulXx
    @xXLoneSoulXx Před 8 měsíci

    lol way too risky smh