Vložit
- čas přidán 20. 06. 2020
- Lot's of folks have taken an interest in the larger buckshot pellets! We are gonna demo the .36 cal #000 and the .38 cal #0000 shot size. In today's episode we are taking a look at the performance of the #0000 (Quad) buckshot.
Click on this link to get 10% off of your total order with Marty’s Molds: www.martysarms.com/discount/B...
/ bubbarountreeoutdoors
www.rushguideservice.com
www.bubbarountreeoutdoors.com
www.rhinoboat.com
www.amazon.com/s?me=A2KUCZ5PP...
www.truglo.com
www.swumphunter.pro
www.hoorag.com
kramerleather.com/index.cfm
www.kicks-ind.com
www.ballisticproducts.com/defa...
www.osceolahatco.com/
www.hivizsights.com/
www.pelicancoolers.com/
www.lymanproducts.com/
leeprecision.com/ - Sport
![Stuff You Should Know About Buckshot [Part 1]](/img/n.gif)
Came across your page by accident...stayed and subscribed for the content and your clear examples of the reload process...you rock brother!
Man! I been trying to get set up for loading 000, 36cal stuff forever & now that I'm finally doin it, I want the quad 🤣!!! Good stuff, thanks for sharing. Be safe 👍
*0000 'quad-Ought' buckshot might work better in 10 gauge or 8 gauge. .490" or.495" stack in pairs in a 1" bore PUNT GUN. PROBABLY, the 'punt gun' is best enjoyed MOUNTED to a punt or 'boat'. I do remember Wade mentioning that .29" and .31" shot work very well on deer.... from 12 or 20 gauge NORMAL shotguns.*
I just got into reloading everything the last few years you are the best I've seen for reloading buckshot keep up the good work young man grate job
My pleasure brother! Glad the videos have helped you out...
Well with a couple of practice loads I finally got these quad loads to work,i had the dimpling issue,but I loaded up 15 rounds finally and went to my range I tried 3 different chokes In my 11-87 super mag with my best results being at 40 yard's but my Mossberg 835 and the kicks choke I got consistent 8 pellets out to 90 yard's same with my 870 pump and just for laughs i sent 2 through my old Marlin goose gun 36" full choke,switched to my rifle range 150 yard's and both shells put 5 out of 8 pellets in a 7" circle at 150 Yard's and penetrated 2 sheets of 3/4" marine plywood,mr,rush you have taken what use to be a limited range weapon and turned it Into a deer killer out to 30-30 ranges I appreciate you taking the time to share your knowledge
great video
I want to thank you for your tutelage. I learned so much watching you. You have an easy non-rushed manner that was a delight to watch. Once again thank you sir.
My pleasure Julio... I'm glad the videos have helped out! Wade
Love these reloading videos, stay safe and god bless from the UK.
Thank you professor WADE you are definitely the best out there when it comes to this buckshot reloading
thanks bro Tim!!
Happy father's day . Thankyou for a awesome video mr rush. I love watching your videos. God bless you all and take care and be safe sir
Thanks David!!
0,380 super buck is very Good for reloading 410 and 10 gauge
Allways a pleasure seeing another loading video.
Thank you for the video. Been reloading 6ea .375 RB in a 2 3/4 hull under Unique. Used a cut WAA12 wad without the petals. Never shot anything with it but my 870 at 25m is tight. Use cream of wheat for my filler. Just subscribed
You are correct on the roll crimp,my Remington 11-87 will stick every time,and it's the super mag I believe it's the loading ramp maybe that does it
Great video...thanks for posting. Lots of good info here.
Thanks for all the great info .I am fairly new to shotshell reloading and ,with the shortage of components you have been a big help. I would love to see some info on short shell buckshot and or slug loads. Does pressure increase much with the smaller volume of a shorter shell? Thanks again.
Love your videos man keep it up
Great stuff Wade, thanks again
First, love the hat. We should all be fishers of men. I love when you say "They find their place". We all need that advice in life. I loved your video on using fishing weights to make buckshot and this one was awesome as well! Keep up the great work brother!
you bet brother...
Best logic and detail! Figuring to load black powder some day. Hmm. Ideas for the front stuffer.
Should work like a dream!
Another great reloading video, thanks Wade. Any plans to do another buck and ball video? Best wishes from UK take care stay safe.
Years ago the oldtimers would load 000 hardcast wheel weights with a mark5 type skirt from greenhouse window poly plastic, around to flow smoothly thru rough barrels. Seemed to get 40 yard deer groups with original bluedot and 800x. Reminds me of the good ol boys! Venison and pork bacon with onion!!!!!!!
Hey Loren, now-a-days we use a Mylar wrap to do the same job! Wade
*000 'plus' @ 0.365" is another INTERESTING size.*
I'm learning a lot about buckshot from your presentations I'd love to see some 16 gauge buckshot
Wade, I found a new run of Winchester 209's that were DIRT cheap. $22 for 1k at my local sportsman's wearhouse... I'll send you a picture in an email later. They are packaged differently than the blue and gold we are used to. I've tested them in 20 gauge with #4 buck and they work just fine!
I have shot 000 before and they work well, never had any 0000, but im stickin with #1 3 inch and a Carlson buckshot choke. Its murder at 60 yards.
Ohh Hell... I gotta subscribe now. I'm hooked and don't even reload.
Just got my fs in with my new fiocchi hulls
Thanks for the great info. It is always good to see this type of vids. What type of lead mix do you for your OOOO casts?
Hey Tim... I use both pure lead as well as wheel weight lead which can contain 2 to 4% antimony & tin. Both work well out of Marty's Arms molds.
Another great video
not bad for a 3" 12ga load and 0000. 10ga keeps the big 0000 pellets a bit tighter at range, but it would be interesting to see the same loads put down-range with a "over-bore" 12 like the Mossberg and Winchester offerings.
*MUCH* more interested in seeing tests pushing these to the 1500fps velocities out of a 18.5" barrel for -25m defensive ranges.
Also: Newly subbed! 👍
Love the big lead wade how about so good 20ga loads sir 2 3/4 mag or 3in
Great vid!!! Nobody reloads shotgun ammo around here because there is not a hunting season for shotguns what does a good used 650 go for there around your neck of the woods? I have never seen one used around here!!!
I've got a stoeger m2000 I love it will shoot any thing I stuff in it
Im loading the same size round balls but im able to get 12 pellets stacked in 3's i am loading with black powder useing 65gr of 3fg
Love your videos and very proud to see someone using Italian products 😜
Question, have you ever tried to drop the powder charge and make something that shoots under 1000 fps? I'm thinking that you might be getting tighter groups. Not sure just asking.
👍
yes I have Frank! I have shot several rounds that are moving at 850-950 fps with awesome groups at 45 yards!
@@BubbaRountreeOutdoors thank you very much for the quick response. I think I never seen that video if you made it. I gotta look for it.
Watching from Canada 👍👍👍
@@frankmartino835 My pleasure Frank!! Wade
What if you took up some of the space or voids with #4 buck or BBS? Would that even work? I’m old veteran shooter but a still dripping wet newby at reloading shotshells. Kinda a scaled down “buck n ball” load.
Im just now hearing about qaudbuck and tri ball which is cool. I wonder about the other end of the spectrum. A number 5 and 6 buck
Those smaller shot sizes are typically called F and T shot. Old school waterfowl loads, used to be fairly common back when geese could be hunted with lead
It was a good video. How much for a full case of 25 or a box of 3 inch.
Tried 000b but didn't work out too well, so i just mold 00b works awesome and super cheap. Have you tries white led lights they really work better and save money on energy cost.
Yessir! Almost all LED lights now!
This guy is the Sensai of Shotgunning...
Another excellent video..!
Question... Do you ever recover your lead from your range to shoot again?
Thanks for the video...
Yesser! Country Boy digs in the berm and collects several pounds of range lead for me every trip to the range! i will tack that segment into a video for y'all soon...
@@BubbaRountreeOutdoors
Excellent... looking forward to it.
@@BubbaRountreeOutdoors I'd love to see that too. I scrounge my personal berm out back every so often... but water & a scrub can only get lead "so" clean. I'd like to see how you clean yours if possible. Thanks B.R.O. 👍
@@thereindeertherabbitthebat592
No need to give the lead a wash, just shake the dirt out through a screen , into the smelting pot, and put the heat to it. All the dirt and crud will float to the top to be skimmed off. Flux thoroughly with sawdust!
I have been wanting to try a .490 50 Cal ball in a 12 gauge any suggestions?
Another awesome video. I grew up hunting Deer with Buckshot in front of Dogs in North Carolina. As a matter of fact I never killed a Deer with a Rifle until I was in the Army at 23 YO. I noticed these loads were good, but not as tight as some of the other loads I’ve seen you test before. Was this due to the Larger 0000 Buckshot or was it a different Choke constriction that caused the difference?
My Stoeger does okay with the Quads but does way better with the #000! If I put my 28" barrel on the old 870, it does a little better with the Quads!
Bubba Rountree Outdoors I’ve never done any shotgun reloading, but I’m getting interested in doing some shotgun shell Reloading. Do you have any preferences of loading equipment for shotguns?
Thanks, hard to find info on the quad-ought. Have you tried these out in a barrel over-bored to 11 gauge? Pruno
my pleasure Pruno! No. Only 12 gauge!
Do you have any experience with the 44 mags??I picked up a Ruger 77/44 bolt action beautiful rifle has a tru glo red dot sight,ive tried every factory round I can get nothing seems to reach the potential I know it has,lever evolution ammo from hornady had the worst results,the only one that grouped well was the Barnes,but performed bad on the wild hog,thought maybe you had a hand load
PMC and Buffalo Bore make good ammo.
I'm all ready wishing it was deer season
Wade I found 3/8” steel sling shot ammo cheap. Wonder if that’d make some good quad buck?
I've never tried that size! It may work great.
what are we suppose to do, when you cant get any of the gas seals?
Bubba Never been much of a blue dot fan with years of experience reloading and shooting in trap leagues with Annies involved. Haha Seems when it got dark you could always see a flame of fire from the end of gun barrels from people using blue dot. I saw in your last video you using longshot. Personally I’ve saw a lot of coyotes over the last +10 years take dirt naps from my buddies and I using about 31-32 grains of longshot using 4 buck and or T’s using a AA12R in just a plain Jane AA Hull. And Personally just seeing what I’ve seen over the years I Wouldn’t shoot any other load for home defense either.
Are those AA hulls the new HS ones or the old ones Sir?
Vince usually the older style ones because I have so many of them
i wonder would those shot load in a 410 round for the pistols an maybe a single shot for kids
What is the buffer you throw in?
I have a bunch of hevi steel 3” hulls once fired duck hunting, can you press me some size F steelshot and you can have half of them?
I bet quads would be awesome in 10 ga with its .775 bore.
Ballistic Products has been out of the FX12 for quite awhile. I was wondering if Precision Reloading version is the same, product number TUWGS12C.
yes it is the same!
May God continue to bless you with love happiness and wellbeing
I'm still trying to find your video on the 44 caliber buckshot loads you made before.
Here it is! It's linked to the range shot with the 3 1/2" round with five of the powder-coated .44 cal ball! czcams.com/video/N67zSP2HetU/video.html
@@BubbaRountreeOutdoors thank you sir. You're awesome.
Bubba I have Remington Tapered hulls and TGT12 wads (1 ounce), is there a good buckshot loading option that I can use???? I don't have any buckshot that I can test load, to figure out what fits well. 12 pellets of #2 looks like the best fit.
Hey Bud... it's best to contact me thru my website: www.bubbarountreeoutdoors.com/
Are you guys having trouble getting Federal 12S4 Wads? the Brown ones..
YES! They are not as available as they used to be.
How many grains of Longshot replace Blue dot for 0000 buck? Longshot is all I could find.
I Like to use 27 to 28.5 grains of Longshot in mine.
Have ever tried using pyrotex black powder in a shotgun shell just saying if that’s all you had what would happen
Prodex
Just getting ready for Zombie Season!
Love watching you load up shells. How many of the quads can you fit in a 3 1/2" shell?
16 in a 10 gauge 3 ounce load, 12 in a 12 gauge load.
@@theshotgunscientists. War Wolf has 14 pellets at just over 1010 fps
@@skidmark7845 Yep I’ve been loading 14 pellets loads too with lil gun powder.
@@theshotgunscientists That’s awesome. Are you able to get more FPS? That’s the only thing I’m concerned about. I want to be able to reach out a little further like 70 to 80 yards
@@skidmark7845 We got 1066 fps with an even heavier load and that wasn’t even the max powder charge. Lil gun in 3.5” 12 gauge will do a 2.75 ounce payload at 1100 fps. The 14 pellet quad buck load is 2.5 ounces. 45 grains is the max charge for a 2.5 ounce load but I use 43 grains with buffer added. Use a regular full choke non ported and you’ll get 10” spreads with the loads at 40 yards. I just use an x12x gas seal, Mylar wrap and fiber cushion.
What is the British equivalent for this size? Here in South Africa we use UK sizes and LG is about biggest size we get.
Hey Charles... The closest would be a 10mm. Literal conversion would be a 9.7mm ball. Wade
@@BubbaRountreeOutdoors Thanks mr Wade. I will look up what British size would be. In South Africa not many folks use shotgun buckshot for hunting, mostly used for hunting bushpig at night or a particular antelope we call bushbuck in very thick brush, the latter usually driven hunts with hound. As teenage farmboy we used buckshot primarily to shoot feral dogs at night that killed our sheep. Really enjoy your videos a lot.
I was looking for load specs for 3 1/2 inch 12 gauge 000 buck and I can not find any.
contact me thru my web page: www.bubbarountreeoutdoors.com/
do you always add buffer even thought the load doesn't call for it?
Hey William... No, buffer does raise pressures. If you are using a max powder charge that doesn't call for buffer, you would need to drop 5% off of the powder charge when using/adding buffer.
@@BubbaRountreeOutdoors Thanks alot, i have learned alot from your videos.
Why a flex seal in one and the x12x in the other wade? Or can you point me to reference material to learn more
No worries pal! I am just showing multiple options... a lot of components are not available rt now! I try to give you guys more choices with stuff that will work for you.
@@BubbaRountreeOutdoors Thanks wade! God Bless Buddy!
Is there a reason y IL. Has to hunt deer with slugs and every 1 else in the country can use buckshot or rifles?
Bubba can I use 3" Fiocchi shell with a magnum primer?
Yes you can. Just drop 5% on your powder charge.
@@BubbaRountreeOutdoors Thank you for your prompt reply... I watch allof your postings on CZcams
So I don’t need a wad with sides for buckshot?
Not at all! All buckshot used to be loaded in a conventional style like I do in this video. The wads with pedals hold a tighter pattern at extended ranges.
Were you still using the Kick’s full?
Yessir!
Awesome! Just ordered some 3 1/2 0000 gonna try them out! Gonna shoot them out the full buck kicker! Definitely gonna have to hang on when they go off!
Ugga bugga. Ugga bugga boo.
Amazing for self protection
I cant beleive you use that hornady scale..... i need to sell mine
How much you asking ?
rem hulls..check Win 209 check... BP Gas Seal check...BP..Original buffer..check.. 0000 buck ..check IMR Blue or Alliant Blue Dot or anything Blue have not seen for over a year . Even at current mark up prices.
czcams.com/video/yTcQdYJBEs8/video.html
@@BubbaRountreeOutdoors Thanks Bubba, Going to try longshot have Win 572 too. FYI: You have very informative videos I for one appreciate them.
@@ruizhou9612 czcams.com/video/fDGH3SHAngI/video.html
Shareding cheddite hull loading 10 0000 buck tried 37 to 39gr blue dot with same results. All 10 in a 14" patern at 60 yards is the cheddite hull to thin?
Those big pellets need a lot of lube or they will shred the hull! I use Alox and graphite on mine. even if I powder-coat the quads, I still coat them in Alox simply because they fit so tite in the hull.
@@BubbaRountreeOutdoors 10-4 thanks
Hey Bubba Roundtree Outdoors can I get that hat with the Bible verse?
ai like...........no se ingles.
Mold is about twice the cost of what I could pay.
[Kip