HOW TO BUILD AEROX SUPERSTOCK ENGINE | PARTS, ISSUES AND PROBLEMS DISCUSS BY TEAM JERSPEED

Superstock engine build.
- Compression ratio
- Parts to be used
- issues
- Common superstock engine problem
build by TEAM JERSPEED
PLEASE LIKE, SHARE AND SUBSCRIBE TO MY CHANNEL FOR MORE😎👊

[@diosdadolorenzojr.6233]

Sir balak ko din mag super stock from nmax v1 , need pa ba i-valve pocket ang r15 v3? Gamit ang rs8 stage 1? Ano po magandang ematch na fuel injector sir?

[@ericsonevangelista511]

iba ka talaga master, yun dapat. keep it up and ride safe always master.

[@jerspeedmotovlog]

Salamat sir ridesafe din po😁👍

[@ericsonevangelista3500]

@@jerspeedmotovlog master ng palit lang ako account . Yung sa office ko kasi yung emqil n yun qhahq kayq ito personal account ko na ginamit ko. Thanks uli master. Pa shout out sa next vlog thanks master.

[@jastinemaesibug6174]

Ok ung vlog mo boss! ang galing magpaliwanag

[@jerspeedmotovlog]

Salamat po sir😁👍💯🔥

[@poginghamog9494]

Lodi ka talaga sir👌🏻

[@justride09]

Well explained, more superstock content lods👌

[@jerspeedmotovlog]

Thank you sir😁👍

[@jacquelinesilva2396]

@@jerspeedmotovlog vhh

[@usmansamad3444]

Boss, pwede ba mag +4 crankshaft sa aerox superstock? Power cam, r15 piston with pocket, valve 20.1/17.

[@eldevincabatlao1213]

sir pag
(stock block
r15 piston
stage 1 camshaft
valve spiring st 1... pwde kya ibig bore yan MTRT 19/22?

[@markmoto1160]

Galing lods keep it up

[@jerspeedmotovlog]

Thank you po😁👍

[@marvillasenor5160]

idol solid yun super stock na ginawa mo sa aerox, stock pa din as of now aerox ko, gusto ko dyan ipagawa syo idol, pa bulong nman magkano abutin ng budget sa ganyan, Mabuhay kayo team Jerspeed

[@jerspeedmotovlog]

Pm nyo sa TEAM JERSPEED sir 5k plus lang po yan

[@christianmacapagal457]

@@jerspeedmotovlog sa nmax v2 kaya magkano

[@bourntobewild299]

Boss jerspeed ilang cc po ba ang injector na kailangan at anong cams??salamat po boss.

[@noelchristophersanchez3863]

Idol ilan holes ginamit mo injector pang ilan cc? And ano sukat yung valve springs mo

[@reymarkdelrosa642]

Boss okay lang ba stock pipe sa super stock?? O mag upgrade ako?? May jvt v3 kasi ako e

[@animelovers8956]

anong magandang set up gilid pag naka superstock na flyball center clutch spring salamat

[@KOJAKLAKWATSERO]

oooo dbaaaa....astig

[@jerspeedmotovlog]

😅👍

[@MotoMoy]

Idol more power. I'm not sure po kasi sa compression ratio sa gawa ng superstock sakin. Is it safe to use 97 octane up na lang po? or is there any way na malaman po compression ratio kung build na yung engine? Salamat idol. More power!

[@joelclaveria994]

Solid nyan idol! More uploads and upgrades. Ride safe idol. 🔥❤

[@jerspeedmotovlog]

Thank you sir😁👍 ridesafe din

[@joelclaveria994]

Idol about sa spring may tanong po sana ako. 😁

[@jerspeedmotovlog]

@@joelclaveria994 yes po?

[@joelclaveria994]

Goods pa ba yung center spring ko is maraming ikot gaya nung nasa unang vlog nyo po na nasa left side na pang nmax v2

[@markangelobrioso7789]

@@jerspeedmotovlog magkanu po aabotin ng gastos At san po loc ninyo salamat po.

[@marcberania3612]

well explained lods.

[@jerspeedmotovlog]

Thank you sir😁👍

[@johnmichaelsarte8889]

Ano po pang gilid set sa super stock build?

[@edwardsonramos6893]

Very nice, sana lodi sa next footage mo my output review ng Super Stock na gawa nyo > Acceleration 0-100 at Top Speed :)

[@jerspeedmotovlog]

Soon part 2 😎

[@kristiangalban3504]

Up for this

[@eugenelusdocjr8429]

Up nag hihintay kami boss

[@marlzdigitalworld1252]

Yung sa superstock na setup saken Sir hindi stable idling nya..Pwede ba ipaayos yung sayo?

[@jczambas3512]

Sir kamusta naman po ang gas consumption kapag naka super stock ..

[@animelovers8956]

ilang turn po ginamit niyo na valve spring

[@kristiangalban3504]

Grabe ka informative!

[@jerspeedmotovlog]

Thank you sir ang madamot panget hahahahha🤣🤣🤣😎👊

[@kristiangalban3504]

Pag nag ka budget sayo ko nalang pa tira

[@jerspeedmotovlog]

@@kristiangalban3504 walang problema sir hahaha tirahin na yan ahahahha

[@pauanelcarpio9716]

Sir 130cc po ba injector..ilang holes.tnx

[@jamesbasco446]

Ano po cc ng injector maganda sa super stock?

[@pauljordansandalo9329]

sir jerspeed pano po i compute yung compression ratio? TIA

[@Aldwyn-dx3cw]

Once ba bro na nakapag superstock lalakas ba vibration ng motor?

[@ralphr3471]

Idol normal b na may madiin na tunog kpag superstock. Slamat idol.godbless

[@jaysonperez2614]

Pa bulong ako Sir. Jerick kung mag kano. 😂 Ride safe and Waiting for more videos. 💪💪💪 Jerspeed lang malakas.

[@jerspeedmotovlog]

Pm sent sir 😅🤣🤣🤣🤣🤣

[@nardongputik1015]

Pabulong din po sir Jerspeed🤝🤲🙌

[@renatocombis4875]

pabulong nman kung magkano sir

[@jozenfranco5797]

First

[@jerspeedmotovlog]

Hahahahhaha

[@johnerick5091]

Napaka informative ng vid. Interested na din ako mag pa superstock. Nasa magkano kaya aabutin nyan sir

[@jerspeedmotovlog]

Pm nyo sa Team Jerspeed page sir

[@johnking150]

Tol magkano magpa super stock sainyo + headworks nren aerox v1 48k odo. kumpleto sa maintenance. change oil, cvt clean, fi cleaning, palit fuel filter, throttle body cleaning.

[@darwinadviento3457]

boss ano gnamit mo na injector? ilang cc at ilang holes?

[@leonoche6864]

salamat din boss🙏🏽🙏🏽

[@jerspeedmotovlog]

💪😁👍💯💯💯

[@leonoche6864]

pagplanuhan na natin next project boss

[@KierasFarmTV08]

ano po kaya top speed ng ganyang set boss?

[@vinzordono]

pde ba stock valve springs?

[@kicksmotovlog9801]

Mgkano po inaabot m budget ng super stock png Aerox po

[@vincentescueta8758]

Idol anong ginamit mo na fuel filter un na lng kulang ko ay huhuhu

[@nashjacinto9403]

boss ano gnamit mo na injector? ilang cc at ilang holes? thanks po sana mapansin po

[@pnoyexcel]

Sir anung brand ng cams at lift niya sir?new subscriber po

[@chrislao8646]

Kamusta po kaya gas consumption after mag superstock? Hehe

[@giearnacor3991]

Sanaol my sticker ng idol 🤣😂

[@jerspeedmotovlog]

Hahahahhahha

[@micmorales7758]

idol magkano kaya total gastos ng ganyang set up kasama labor

[@iamsisingxd1457]

Ano cc gamit nyo po na injector?

[@averomotovlog1470]

ilang cc nang injector gamit lodi?

[@markangelobrioso7789]

Magkanu po aabotin ng super stock ng aerox?

[@justinedelapena5739]

Magkano aabutin pag magpapa super stock bos ?

[@ronynsantos6698]

Good review! nag remap po b kyo s ECU?

[@jerspeedmotovlog]

Nope stock ecu lang po ang baon

[@dexterangat3172]

sana boss yun top speed nag pagawa na kuha mo para lalo masya 😊

[@jerspeedmotovlog]

Meron yan sir soon to release

[@melallanaseron5552]

Yown...

[@jerspeedmotovlog]

Yown 😁👍

[@jaygacuya1603]

Boss Jerspeed tanong ko lang kung goods po ba na gumamit ng mtrt brand para sa supersotck?

[@jerspeedmotovlog]

Wala naman sa brand yan sir. Nasa pag kaka build po yan

[@lloydrocha236]

Sir affected ba durabity ng engine at ibang parts pag ng super stock? Mas madali na ba ang wear and tear ng mga parts kagaya nangyari sa bore up?

[@jerspeedmotovlog]

Hindi sir same pa din po sa stock engine unless u used flat or dome type piston for superstock😁👍

[@lloydrocha236]

@@jerspeedmotovlog thank you po sir

[@pauldomingo770]

Sir ask ko lang po ano po possible issue ng aerox ko bigla kasi ako namamatayan kung tumatakbo ako. Recently nagpasuperstock build ako and yun basic superstuck build na nasa vid mo ang sinunod ko like valve springs, injector, camshaft, r15 high compre piston.

[@jerspeedmotovlog]

Ilan compresion ratio mo?

[@findtherightbeat]

12:44 Sir, medyo na-confuse niyo po ata yung concept ng compression ratio sa air fuel ratio

[@astrufelsebastianaguinaldo3847]

panu yung stable na idle sa super stock boss

[@pedrotv408]

Idol tanong lng. Pwd sa stock pipe yan? At meron na din kayo pang honda click? Salamat idol..

[@jerspeedmotovlog]

Nka stock pipe lang yan sir

[@jhonalunan7532]

Boss gumagawa po ba kau pang nmax v2

[@bryantecson1787]

Idol jerspeed ask ko lng ilan octane need pag nka boreup 63mm?

[@jerspeedmotovlog]

Depwnde po sa compresion ratio ang octane level na gagamitin sir

[@fugabanjeff1386]

Lodi required b magpalit ng injector pag super stock at nka trotole body n ty

[@jerspeedmotovlog]

Depende pa din sa build air

[@neiljosephtumaneng54]

Ano sukat Ng injector .. Buti di Po sya lean

[@michaeltenefrancia4832]

Sir mag kano pa super stock sayo..

[@adamleonheart6122]

Boss amo! Kapag after magpasuper stock at naibalik na yung lahat dapat po bang magrefresh o mag reset ng stock o racing ECU man? May nagsasabi na hindi na daw po.

[@jerspeedmotovlog]

Pwedeng hindi na pero kung gusto mo optimize ung afr mo mas calibrated kasi thru racing ecu

[@adamleonheart6122]

Yown. Salamat. Mabuhay Ka! 🍻🍺 #jerspeednumbawan-tu-tree

[@pauladriane4066]

Sa mga review mo ng cvt paps, naka stock kaba duon?

[@jerspeedmotovlog]

Andun po mismo ung build sir 2 po gamit kong aerox stock at bore up po ang pang review ko. Pra makita sa stock at sa boreup kung meron bang response.

[@rodelrogador2219]

Lods pa ask naman, stock engine akin walang binago, papalit sana ko stage 1 Cam R15 Piston at Valve Spring, ilang cc kaya ang magandang injector? thank you lods

[@jerspeedmotovlog]

Depende po sa kalalabasan ng afr if nka pipe kayo, ram air, etc.

[@animelovers8956]

pag papalitan ng cams need paba palitan timing gear or ok lng yong stock

[@jerspeedmotovlog]

Ok lang din naman stock sir

[@animelovers8956]

@@jerspeedmotovlog about nmn po sa cams ilang mm lift ng stock ng aerox kc my na bili ako na second hand 4.5 lift niya sabi stage1 cams daw pero para siyang stock

[@joeriejayguimba1755]

Sir ano po yung fuel injector? Pwede bang specific?

[@jerspeedmotovlog]

Hindi ako nag lagay ng specific dahil magkakaiba po ang build at pagkakaporting ng head sir. Baka maligaw ung build nyo. Alam po yan ng mekaniko nyo sir. Salamat po.

[@jondavidbryannavarro5743]

Bumalik ako sa pagka HS sa Video mo lods haha.

[@jerspeedmotovlog]

Hahahahha😅

[@ralphr3471]

Idol need pa ba magpalit ng injector kung sperstock.

[@jerspeedmotovlog]

Not necessarily sir. Depende po sa build.

[@danielianhallasgo2202]

IDOL! pwede mag tanong? pwede ba yung 140cc 8holes injector idol?

[@jerspeedmotovlog]

Pwede sir depende sa nag build sayo yan sir

[@tosviernes3302]

Sir jerspeed need po b tagala mag head work pag superstock lng?

[@jerspeedmotovlog]

Yes sir

[@jczambas3512]

Sir @JerSpeed, gawa naman po kayo ng content. Bakit need mag palit racing valve spring, ano effect ng cams etc. More on head explanation.

[@jerspeedmotovlog]

Salamat sa suggestions sir try ko po😁👍

[@jczambas3512]

@@jerspeedmotovlog its for the viewers benefits and also for the trust of your future customers. If ma explain mo kasi yung mga function ng mga parts mas madali silang ma coconvince and magiging kampante mga mag papagawa sayo.

[@ebrahimkagui1527]

Gud eve sir kapag super stock set up pwd po stock lng ang pipe?

[@jerspeedmotovlog]

Pwedeng pwede po sir

[@ebrahimkagui1527]

@@jerspeedmotovlog thank u po sir

[@nicoleannesupan5884]

yung sakin sir pag mainit na galing sa full throttle umuupo yung idle.. may cause po ba yung sobrang taas ng lift?

[@jerspeedmotovlog]

Nope. Mis calculation po ng build

[@jcfzambas1972]

Sir Jers. Need ba talaga mag palot ng injector ??

[@jerspeedmotovlog]

Xepwnde po sa ibuibuild not neccesarily

[@franzboncato1109]

Sir baka pwede po pabulong valve clearance ginamit mo sir.😁😁

[@jerspeedmotovlog]

Secret hehe🤣😂

[@abodarztv8516]

boss need pa po ba i pa tabas kung block at r15 piston

[@jerspeedmotovlog]

Depende po sa tuner sir kung ilan ang iseset nya

[@rafaelreyes3993]

Hm po aabutin pag basic super stock set up? Aerox v1 po

[@jerspeedmotovlog]

Hi sir pm nyo na lang po sa page ng team jerspeed thank u

[@jaynatividad2157]

Lakas naman nyan lods nag palit po ba kayo ng injector?

[@jerspeedmotovlog]

Yes po sir😁

[@supersayenmoto2832]

Ilang cc po yung injector at ilang holes?

[@balotoriusable]

Sir ilang cc yung injector dyan sa parts na pinakita mo?

[@jerspeedmotovlog]

Depende po yan sa total ng karga mo sir kaya hindi ko inispecific. Kasi ibaiba ang build po hindi pare parehas.

[@xynog3ntv588]

Ano po set up ng center spring nya pag super stock na?

[@jerspeedmotovlog]

Dedepende pa din po sa tuning sir

[@dyr4lyf793]

Pwede po ba ung +4 na crankshaft sa aerox v2 superstock?

[@jerspeedmotovlog]

Depende po sa builder nyo sir

[@richardveracruz3407]

pag super stock po kaylan preferrably mag chachangeoil paps??

[@jerspeedmotovlog]

1k min 1.5k max sakin sir

[@maicmotovlog]

Sir magkano po lahat magastos kapag nag superstock? Ride safe idol jer

[@jerspeedmotovlog]

Pm sa TEAM JERSPEED sir. Thank you po ridesafe din

[@Qwertyasdf-1111]

How much po mag pa superstock sa aerox 2019 . V1 ko . At saan po location ng shop nyo

[@jerspeedmotovlog]

Pm nyo po page ng Team Jerspeed sa fb sir

[@cyrusjavier2418]

Idol pwede ba mag port cam at boreup pero stock ecu pa rin???? ride safe idol

[@jerspeedmotovlog]

Pwede naman po basta tugma po ung build mechanicaly. Pero lalabas pa ung fukk potential ng build pa na program na sa ecu.

[@jerspeedmotovlog]

Pwede naman po basta tugma po ung build mechanicaly. Pero lalabas pa ung fukk potential ng build pa na program na sa ecu.

[@cyrusjavier2418]

@@jerspeedmotovlog RIDEsafe stay safe idol Jer

[@cyrusjavier2418]

@@jerspeedmotovlog pero boss jer pag po ba nagboreup ka.. pwede stock cvt muna??? tia

[@markangelobrioso7789]

Tsaka po sang loc po salamat.

[@riderninja1779]

Ilang mm yung big valve nyo dito paps?

[@jerspeedmotovlog]

Stock head po

[@macmacroyalty8594]

Anong pros and cons ng superstock sir?

[@jerspeedmotovlog]

Accelaration n topspeed

[@reniellegaspi475]

if ever magkanu abutin sir aerox v1?

[@jerspeedmotovlog]

Pm nyo po sa fb page ng team jerspeed

[@ajdb013]

Hm magpasuperstock sa inyo idol

[@polguillermo2195]

Goo day Boss Jerspeed pwede ba lagyan ng 125 cc injector 10 HOLES itong super stock ko boss jerspeed?
R15 PISTON
CAM STAGE 1
VALSPRING 1K
PORT AND POLISH
RS8 PULLEY SET VERSION 4
RS8 BELL
RS8 LINING
RS8 1K CENTER SPING
RS8 1K CLUTCH SPRING
FLY BALL-9/12 MIX
TORQUE DRIVE STOCK

[@jerspeedmotovlog]

Pwede sir basta tugma sa mechanical build nyo po

[@polguillermo2195]

boss @@jerspeedmotovlog sabi ng mechanic ko 6holes 125 to 135 cc pwede daw boss jerspeed pag 10holes daw hindi kakayanin ng build ko boss. pang boreup daw un.tama ba boss @JerSpeed Motovlog .kaya mas okay sayo ako nagtatanong boss kaso idol ko kita boss pag dating sa build ng motmot

[@ambertv.6111]

Ask ko lang sir about po sa magiging Maintenance ng naka Superstock Na aerox?
I mean yung Change oil nya same pa rin ba ng stock?

[@jerspeedmotovlog]

Same po. Diference po gas na gagamitin

[@genalyndelacruz6694]

@@jerspeedmotovlog panong sa gas po na gagamitin? Hehe and how much po aabutin kapag nag set up ng ganyan po? Pede nyo po ba masabi?

[@jerspeedmotovlog]

@@genalyndelacruz6694 pm nyo po sa fb page ng Team Jerspeed

[@chingkwadose3616]

sir bka pwedi po mag tanong kung ano po ba ang valve gap ng super stock intake at exhaust po..God bless

[@jerspeedmotovlog]

Depende po yan sa setting ng builder nyo po

[@chadmangulabnan175]

11.6 comp ng r15 piston diba idol

[@jerspeedmotovlog]

Ang common. Kung papataasin mo sir kaya yan. Nasa head ang teknik😁👍 thank me later.

[@TheTeryoTeryo]

Sir jerspeed ask ko lang kung mgkano magpasuperstock sayo?

[@jerspeedmotovlog]

Team jerspeed page sir pm nyo po

[@nicoleannesupan5884]

pwedi po ba mag big valve sa super stock?

[@jerspeedmotovlog]

Yes pero mag popocket na😁 check nyo sa mga gawa ng team jerspeed sa fb page may nka superatock n naka pocket sir👍

[@nicoleannesupan5884]

@@jerspeedmotovlog naka tabas po yung piston at block naka pocket na din.. wala po bang loose compression if mag big valve ako?

[@asicavite4569]

Mag kano nagastos?

[@xynog3ntv588]

Stock lng po ba ung cvt bola, center spring at clutch spring yung customer nyo na nag pa superstock?.

[@jerspeedmotovlog]

czcams.com/video/QQzEU5L8Zzw/video.html andito lahat boss

[@rigilkentluna1395]

Sir magkano po abutin ng superstock sa nmax sir kasama na mga parts na gagamitin.salamat po sir nmax motor ko pero palagi ako nanunuod sa mga vlogs mo ride safe po palagi sir

[@jerspeedmotovlog]

Pm nyo po sa TEAM JERSPEED sir pero mga 5k plus po yan

[@zosimoaquino3692]

@@jerspeedmotovlog hm po aabutin pag magpa superstock?

[@pandaadventureunboxing6855]

Di na ba magpapalit ng ECU or Tuned ng ECU ??

[@jerspeedmotovlog]

Depende po sa builder nyo sir😁

[@pandaadventureunboxing6855]

@@jerspeedmotovlog ppero kung sainyo sir kung kayo gagawa no need na palit New ECU ??

[@Ron-en1ko]

Boss pede ba magpa superstock pang daily use?

[@jerspeedmotovlog]

Un gamit ko sir naka ganun po. Daily and long ride