Actually you don’t need to even remove the pin, you can just push it to the left a bit (on the left side of the knob) and it comes off. I’ve probably removed mine about 20 times by now 😅
This specific product was designed for 4th generation Highlanders 2020-2023, not sure if it's compatible for 3rd Gen such as 2015. I would guess that it won't work.
I’m wondering if what you do with your vehicle will avoid the warranty? Because I asked my local dealership and they told me if they find any aftermarket wiring in the car they will not touch the vehicle! I
The world of modifying cars will always run the risk of voiding warranty issues but a dealer would need to provide evidence that a mod directly caused an issue before they decide to not repair an issue. For example, they can't refuse to repair a defective rear axle because you installed LED light bulbs as there is no direct correlation. I'd find another dealer if yours isn't willing to at least inspect or diagnose your issue.
@@sasha85ful Must be slightly different wiring that is incompatible with the aftermarket harness? I know there are other products that don't work on XSE because of this reason.
@@sasha85ful Yes, there is only one plug but it's possible that the wiring harness has a different pattern in the XSE. You can ask CarTrimHome directly for more XSE customers experience as to why it's not compatible.
Can anyone who has installed this on their Highlander tell me if it is possible to keep just one color on all the time , or is the only option for it to change color?
Try this link with discount code 7PZK for 7% off: cartrimhome.com/Led-Crystal-Gear-Shift-Knob-Replacement-For-Toyota-Highlander-2020?tracking=ThanhTran%20
I would double check that the shift knob is fully inserted down onto the rod before inserting the pin in because I don't have that problem. Having a bit of wiggle is normal similar to the OEM shift knob but you shouldn't experience any up/down motion if the pin is inserted back correctly.
Hi @@vietbubbletea , yes it’s the OME Gear Shift Knob. The one you replaced in the video. When you try to pull the knob, you should feel a little bit movement up and down.
Great video, used it see how the center console was removed for cup holder accent lights installation on 22 Highlander
Yes me too
For the cup holder ambient light, is there any other location I can plug the power wire into or is the steering wheel the only location? Thanks
@@buttonsama5751 for the lights I used per directions only steering wheel harness was used, no other option was indicated
@@fixodent6 where can I find the installation instruction? I’m not sure how to route the wire from the center console to the steering wheel
Thank you I just installed mine and it looks great.
Great video! Nice now I'm thinking of getting one!
Just got it today , will install it tonight , wish me luck 🤞
You've got this man, how did the install go for you?
@@vietbubbletea pretty easy , thanks for the video Thanh
Actually you don’t need to even remove the pin, you can just push it to the left a bit (on the left side of the knob) and it comes off. I’ve probably removed mine about 20 times by now 😅
Very nice, thanks for sharing how to install it :)
That's hot!!! Gotta get that😉
I wish the whole crystal lit up, but looks nice.
Dang man, I’m tryin to save money, but your cool reviews makes me wanna spend. Haha
My bad man! 😂
Good video
Sweet
Very nice 👌
Ali express has it not sure if its the same quality but looks same
Thanks for the install video. I honestly don’t love the crystal look. I hope someone will offer a design without that look.
I respect that, an option could be to use your favorite PPF pattern or color and wrap the crystal portion!
LOL Domino's pizza Mustang 😂
🤣🤣🤣🤣
Would this work with a 2015 highlander platinum?
This specific product was designed for 4th generation Highlanders 2020-2023, not sure if it's compatible for 3rd Gen such as 2015. I would guess that it won't work.
I’m wondering if what you do with your vehicle will avoid the warranty? Because I asked my local dealership and they told me if they find any aftermarket wiring in the car they will not touch the vehicle! I
The world of modifying cars will always run the risk of voiding warranty issues but a dealer would need to provide evidence that a mod directly caused an issue before they decide to not repair an issue. For example, they can't refuse to repair a defective rear axle because you installed LED light bulbs as there is no direct correlation. I'd find another dealer if yours isn't willing to at least inspect or diagnose your issue.
I wish I could
Love it
It said not suitable for XSE. But shift knob same as all trims. Why?
@@sasha85ful Must be slightly different wiring that is incompatible with the aftermarket harness? I know there are other products that don't work on XSE because of this reason.
@@vietbubbleteaI watched again. You connected only one plug to it. Second where?
@@sasha85ful Yes, there is only one plug but it's possible that the wiring harness has a different pattern in the XSE. You can ask CarTrimHome directly for more XSE customers experience as to why it's not compatible.
@@vietbubbletea I understood. In your video you connected small plug in it. Where big plug to connect?
@@sasha85ful Cigarette lighter socket in center console
Is it still working well? Do you have any problems with it until now?
Still works perfectly since I've installed it
Can anyone who has installed this on their Highlander tell me if it is possible to keep just one color on all the time , or is the only option for it to change color?
I've tried to check for myself and it only has the color changing option
Iam having trouble with the link to buy can you help for me
Try this link with discount code 7PZK for 7% off:
cartrimhome.com/Led-Crystal-Gear-Shift-Knob-Replacement-For-Toyota-Highlander-2020?tracking=ThanhTran%20
My doesn't come with the pin , can I use the original one from the Highlander ?
The OEM pin should be identical and should work. Just give the knob a tug up once installed and if it doesn't fly off, you'll be okay.
@@vietbubbletea thanks Thanh
Where can i buy one for my toyota corolla cross?
You might be able to find a seller on AliExpress and ask them if they have it available for you vehicle model
Hey! Do you know if they have speaker the pop up on ur dash for this car like the Benz do?
Sorry, not that I've seen for aftermarket.
@@vietbubbletea thank you. Please post a video If you do find something.
Hi guys, I found my gear shift knob is a bit loose. It can be pulled up and down slightly on the stem. Does anyone have the same issue?
I would double check that the shift knob is fully inserted down onto the rod before inserting the pin in because I don't have that problem. Having a bit of wiggle is normal similar to the OEM shift knob but you shouldn't experience any up/down motion if the pin is inserted back correctly.
Just checked a demo from dealer today. The gear shift knob is even looser than mine.
@@jx2398 Are you referring to the OEM shift knob? It should have the same metal pin.
Hi @@vietbubbletea , yes it’s the OME Gear Shift Knob. The one you replaced in the video. When you try to pull the knob, you should feel a little bit movement up and down.
Link?
It's in the video description
@@vietbubbletea ok, it wasn’t showing up until I refreshed CZcams. Thanks!