Hi I am glad to hear this but I need a help we have a bridge stuck in upward position weight 2 ton so if I releases brakes with a switch. Control will it be possible to control the down movement just by on off function by a switch control power supply
show how to connect the motor Fanuc A06B-0186-B675#0014 2000RPM 3.8kW Motor to a wood lathe so that the spindle is like a rotary axis and which controller is suitable or replace with another cheaper one
Hi, I’m using servo motor for juki -LH3168(double needle) but now the motor shows E16 ( error16 ) and its starting is good but after that is not working so could you tell me how to fix The E16 please? Asap Thanks
how are you sir i hope you are fine i have problem in may machine it is a blowing machine i don't know the problem but the servo hanging during work every one hour i need you suggestion about that
Hello Rob please let me know if servo motor (with break) don't have power supply so can we rotate motor shaft with hand? Our motor having little play both side
Hi. Rob. Thanks so much for your super test and explanations!!!! God bless you and precision zone.
Thank for this video.
Can you explain how to find the good ground if I do not have that device?
Thank you very much!
Hi I am glad to hear this but I need a help we have a bridge stuck in upward position weight 2 ton so if I releases brakes with a switch. Control will it be possible to control the down movement just by on off function by a switch control power supply
Zoro adjustable encoder steering method ?
I am thinking of making a project that with a giant servo motor that are used for a car engine.
Great video,
Regards.
Okay, thank you for letting me know that sir.
Good job
show how to connect the motor Fanuc A06B-0186-B675#0014 2000RPM 3.8kW Motor to a wood lathe so that the spindle is like a rotary axis and which controller is suitable or replace with another cheaper one
Hello, can I know the type of the motor, I mean, synchronous or non-synchronous without opening it, and how is that? Thank you very much
Can a AC servo generate holding torques same as stepper ?
My embodary machine servo motor get wet due to amplun cyclone rain water. I don't know what to do next ? Does it will work if I start machine ?
Hi,
I’m using servo motor for juki -LH3168(double needle) but now the motor shows E16 ( error16 ) and its starting is good but after that is not working so could you tell me how to fix The E16 please? Asap
Thanks
Nice
how are you sir i hope you are fine i have problem in may machine it is a blowing machine i don't know the problem but the servo hanging during work every one hour i need you suggestion about that
Hello Rob please let me know if servo motor (with break) don't have power supply so can we rotate motor shaft with hand? Our motor having little play both side
Hi. Yes you can, but very little in cw or ccw turn.
f07841 faults in servo motor what would be the reason
or just download the datasheet of the motor to find the releasing voltage
It would be nice if that was always the case.
Too quick, could of done with you showing how you found the correct pins on the multi pin servo, as wouldn’t want to Megger the incorrect circuit
How to find the pin i have to supply 25 to 90 volt
24 or 19 v
Hi
1pash ces pr 12 13 14