Video není dostupné.
Omlouváme se.
UPGRADE MERCEDES C250 AIR INTAKE TUBE PIPING
Vložit
- čas přidán 12. 09. 2018
- In this video, I tell you the reasons why you should upgrade your stock Mercedes-Benz C250 Turbo 4 Cylinder engine air intake tube pipe hose to a Tornado Tuning higher quality product for durability, longevity and of course, more power!
Air Intake Tube Available for Turbo 4 Cylinder Mercedes engine (C250). Please check with Tornado Tuning for vehicle compatibility.
DISCLAIMER: This video was sponsored by Tornado Tuning. All views and opinions expressed in this video are of my own.
Contact:
NARESH VIRKAR
WhatsApp: +85292106377 (preferred contact method)
Email: Newtongsm@gmail.com
Facebook:TornadoTuningInternational
Track: Kozah - Travel Again [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Kozah - Travel Again |...
Free Download / Stream: ncs.io/TravelAg...
DISCLAIMER: This video is NOT endorsed by, directly affiliated with, maintained, authorized, or sponsored by Mercedes-Benz. All of the videos on this channel are for entertainment viewing purposes only. Due to factors beyond the control of FlexxAlexander, I cannot guarantee against improper use or unauthorized modifications of this information. FlexxAlexander assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. FlexxAlexander recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of FlexxAlexander, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not FlexxAlexander.
FOLLOW ME!!!
Website: www.FlexxAlexander.com
Facebook: facebook.com/FlexxAlexander1
Instagram: instagram.com/Flexx_Alexander
Where can I purchase this item?
Any word on where to get the adapter?
Thank you for your videos they help the Mercedes community a lot 💯🙏🏼
Thank you and the rest of the viewers who support me. I appreciate everything!
This is a great video. I found out I had a busted intake tube when changing the water pump 2 days ago. During the process, I even broke off a piece and it was brittle already. I had to make a spot decision to just put duct tape on it and put in back in like that. Not to mention, it was a pain to put back in. I spent more time on the tube re-install than with anything else. I'm looking for a new intake tube. Thanks!
The dealership quoted me $780 to replace that small black hose attached to the entire thing 😰 glad i came across this and know I can do it mysef
did you watch this? czcams.com/video/-0CTxDrcTyc/video.html
Keep Making more upgrades bro we wanna see that c250 going 🤙🏽 and make it crazy loud 🍿
Tanx again for the tutorial.
Really appreciate it.
I now need a new intake.
Just returned from dealer and Wow, can’t believe we have to buy the entire assembly. Dealer was generous to waive tax on 300 Canadian dollars.
Anyways. I shot Naresh a message and waiting for reply.
Stay safe hermano…
Keep it coming.
Okay, I understand IM in Alabama but wanted to do that first before running the dual exhaust to the rear.thanks for the feed back on that just don't want to see a check engine light
I noticed there is a K&N filter in that car. The mechanic I used to go to told me not to use those as it screws up the MAF and O2 sensors. K&N says there should not be a problem... who do I believe? Have you had any problems with the K&N?
KN filters alone don’t mess up cars. Over-oiling a KN air filter will mess with the car. Over-oiling any cotton based filter (even if not a KN filter) will mess with the car.
Amazing 😍
First to comment...lol
Has anyone ever had a problem with the temp gauge moving up and down and I already replaced the entire thermostat and flushed my coolant as well ? Any ideas or solutions ?
I've seen people in the W204 facebook groups talk about this. I think someone did have an answer for it. You should go search in the facebook groups.
You definitely know your way around these engines . Very helpful video ! Do you know if the M271 turbo engine in the C250 1.8 liter turbo has an EGR valve ? I cant see one but its very tight packaging . If there is an EGR valve where is it ? Thanks .
thanks, great info
May i know if you have the adapter part number ?
If I was to replace that part with ghetto tube same size an fitting will it work or will I break my engine/turbo
What sensor is that final connection end of the air intake? I seen that my connection has been missing wanting to figure out what it’s called?
Honestly, I’m not really sure. I don’t even think you can buy it separately because when any portion of the OEM intake tube pipe fails, Mercedes only offers a replacement pipe that included everything. I’ve never see individual parts of it being sold. That’s why I had to reuse the sensor on my aftermarket pipe.
Alex thanks
Hi Flexx, any idea where I can get that adaptor you talked about?
Hello sir i would like to buy extra power for My w204 c180 petrol 2009 model manuel gear where should i can buy the item kind regard Butt Danmark
Flex. Disconnecting the battery causes problems right?..what are they?
I removed my air intake tube on my 2012 c250 mb and cant get the bottom on, is there a trick to put it back on? HELP please.
It also helps to take out the inside rubber piece...and use a plier to "slightly spread open" the plastic end of the tube so it's wider. Put the rubber piece back in, and then I used WD40 to lubricate the inside of the rubber piece. And then I held the entire tube in a vertical position while pushing on the bottom part of the tube back onto the car.
Then I tightened the clamp. Done.
Or take the rubber piece out of the end of the tube and put the rubber piece on the car. "Spread open" the end of the tube. Put some WD40 on the rubber piece while it's still on the car. Then push the plastic end of the tube onto the rubber piece that's already on the car. Then tighten the clamp and you're done.
My car rattles at start
Is it the timing tensioner and can someone show how to change it please
Flexx i need your help big time, my car keeps missing oil and im not seeing no leaks, im thinking of replacing the pcv valve. I see no smoke coming out the muffler so i don’t know if that would be valve seals 😢
Then you’re probably burning oil. You need to see a mechanic asap.
I am definitely burning oil but i dont know if id have to replace the valve seals or just the pcv valve
Hey flex by any chance do u know what this sensor is called 5:56 and what it connects to. I realize that it’s missing the connection to it so wanted to see if you knew what connection it connects to
Sorry. No clue. I think it’s just an air sensor but I don’t think Mercedes sells it separately cause they want you to buy the entire huge pipe. Best way to get it is find a used pipe and take it off.
Does replace the tube really give you better performance?
What did you do for the air intake duct hose that brings air to the box?
This appears to not be the oem one?
Don’t remember but There’s a video on each of my mods on my channel.
Hi Flexx mine hasn't broken off,what would you suggest,replace with upgrade now or wait till stock gives?
Decision is yours.
If you don't care about more performance...just wait.
If you want more performance and have peace of mind it won't break in the future, then upgrade whenever. Make sure you watch the video on the new version.
czcams.com/video/5VBDfKqwg9A/video.html
Hi Flex were you from
Can i mode my 2016 Mercedes Benz c300
Does the battery need to be disconnected?
Where did you get that tube
As mentioned in the video, look in the video description.
How much should this cost to purchase and replace? My dealership said I was in need of one and I believe they overpriced b/c I'm a woman!
What did they quote you?
@@MrCuervo22779 Considering the parts are like 300 dollars i would personally esimate the repair at like 450 or more but this is the stealership so ad 50% lmao i doubt they overpriced it cause shes a woman, they charge the same bogus ass prices to anyone who will pay them lol
So I have to replace the whole intake tube instead of the plastic pvc pipe that's broken?
czcams.com/video/-0CTxDrcTyc/video.html
@@TheFlexxGarage well, see my tube is beyond repair. Initially, searching for repairs for that tube led me to the video you just sent me. Then that video led me here. Therefore I asked, do I really have to just replace the whole damn thing? But ok. I'll be buying an upgraded version of the intake tube from somewhere better than mercedes and will be installing myself. I'll check out turbo tuning first.
I need also air tube pipe
Do they ship to the US?
Hey Flexx, miss your vids on the c250, I wanted to see if you knew what part number that lower sensor that you had to swap over to the new pipe is, wondering if mine needs replaced but cannot find that lower sensor anywhere.
I don’t remember. Easiest way is to take the part number off the actual part that’s on your car. And then plug that part number into FCP euro or Autohaus.
I just ordered this part and it says FoneFunShop on my bank statement, is that correct?
Yes. They are the distributor for tornado tuning. They use to distributor phone accessories but switched to automotive parts.
How about the four c300 2015 can you help me
Where can I get in contact to get the air intake ?
As mentioned in the video, look in the video description.
Is this a petrol driven? Or diesel
Petrol
good video
how can i replace head water pipe?
A2712002452
can you make video?
What year is your car
2012
Flexx Alexander do you have a body kit on it?
No. Its all add on's. Go to my youtube channel. There's like 100 videos on every single mod to my car. Where I bought it and how I installed it.