Mow Boyz Ep 9 - Bought a Wright Stander 32 mower
Vložit
- čas přidán 19. 04. 2021
- #Wright32 #WrightStander #Smallgatemower
Mow Boyz Ep 9 - Bought a Wright Stander 32 mower
So, I had to do something about my dilema with small back gates and the Scag wasn't doing what I needed it to do......so here is my solution and I am VERY happy with it....
Visit my Channel for 100's of other videos:
/ @countrysidestrong - Zábava
Smoking deal on the mower! Cograts brother.
Thank you
Randy I can't explain how grateful I am for guys like you helping me get my lawn care business going. Your challenges have helped me think things through in ways I never would have. I have everything I need and was hoping to start this season but I'm still fighting cancer with good results so far.
I'll be starting late season and with no income my credit is now shot but I couldn't be more prepared.
Thank you 👊🏼🧔🇺🇸
Thanks buddy and you got this
It's good you found something you will be happy with and will work for what you need. Can't wait for a vid in the next couple days to see about the snow. I'm in CT and last thursday the weather clowns were calling for 5-8. Yeh we got 1. Thanks for the vid!
Yea same happen here couple weeks ago
i got a 32 inch stander also for 1850 recently very similar to yours! love the mower so far got it with 450 hours and just had to spray some carb cleaner up the main jet
That's a steal! Nicely done. I had an old 36" SWZU and sold it because of what you said - to hard to maneuver in small areas. I will have to start looking for an older wright stander!
It's an awesome machine
Glad to see you found the mower to fit your needs, and hopefully you can get rid of the scag. Good luck!
Heck yea it's perfect
We got 4” last night and none of it stuck to pavement or walks, NW Missouri. It was all melted off by noon today. Awesome little Wright you got there!!!
I hope it does the same for us. Thanks I really like it so far
That’s a great buy that’s for sure! That’s a handy little mower!
It's perfect
I'm still here! 😁 That's a very efficient sized mower mate, nice! 👍
Lol thanks buddy
That 32 is perfect for your setup...definitely worth whatever you need to bring it up snuff. Somebody up there likes you Randy...
Amen
Great info and enjoy watching your channel. I do about 55 residual lawns with a Bobcat wb for the last 5 yrs, well this year I thought I should upgrade like a bigshot and bought the Exmark staris 48. So far I it's ok, but it tears the lawn up if you aren't careful, I'm starting to think I will end up selling it, but I don't have the bankroll that you do, for now I'll use it on bigger properties.
Lol bankroll..., Pretty much any machine is gonna give you that issue. Walk behinds usually do better because they're lighter. Just gotta go real slow turning, 3 pt turns every time, etc
@@CountrysideStrong Yeah, i know that. I've just been spoiled by the nice cut a wb leaves, but getting to old to walk 14 lawns a day, so I bought the staris(the frt tires are too big).
$2500 sounds like a super deal. Love how compact it is. Looks like a mini super surfer.
Yea it's awesome. Can literally fit anywhere
That is a good price with the accelerator for sure. I remember the video where we were suppose to guess what you were buying and I guessed a 32 inch Wright Stander, do I win? LOL. Mice mower Randy. That sucks about gas tank leaking.
Lol thanks buddy
Sweet little stander! So do you prefer standers or riders? Taking it further, what would you choose between them for a 2.5 acre yard? Oh and we got a few inches of snow this evening here in north central Indiana.
Standers, they would be my first pick
Good morning.
Nice find for the fleet.
A quick search will produce fuel tank sealers. Ex: KBS (I have no affiliation)
That said this is something I did on a boat tank several years ago.
I didn't use this particular product but the process works.
Remove tank, clean inside tank pour in sealant replace tank problem solved.
For me 125 gal aluminum fuel tank for a Mako
Success for a fraction of the cost of a new tank.
Sealant will not break down over time and foul system.
Also remains flexible.
My 2 cents.
Best of luck.
Thank you appreciate the info
Great job finding that mower. Can't find a 36 stander at all here, for a good price.
Yea I couldn't pass it up
So what is your verdict info the Wright 32 ? Some guys complain that the tires being narrow tear up lawn . Any problems? Thank you
I never have that issue. I love that mower
That was a steal!! Gobbler too! I think you’ll be much better off with that over a stander “b”, in spite of not having a floating deck. Small trade off fir a better quality machine. It’s refreshing seeing you all “giddy” over it. Lol
Hell ya, I love it
That's a big upgrade & sweet deal, used jb weld on supersurfers tanks for 20yrs or seal all.
I'm gonna have to try that
@@CountrysideStrong jb weld will definately work
damn son you did great on that pick up!
I thought so. Good deal
INSANE deal!....im looking every single day down here towards Poughkeepsie NY and theres nothing but junk in that price point when in comes to hydro....hopefully u can recoup some money on the scag now thought...but even what you lose 2500 deff will soften the blow on that
Yea I agree and it's the same here. I got lucky for sure
Thinking abt getting a wright 36. Worried about being tired being on a stander versus sit down after cutting 8-10 lawns a day. How are you holding up when using a stander
Stander is hands down the way to go
Nice mower I've had 2 only difference is mine are John Deere green get the new tank it's a nice mower and be careful that tank sticks out as wide as the mower deck check the hydro belt too they last about 300 hrs good luck with your new mower 🙂👍👍
New belt on it's way. New tank as well👍, it's pretty awesome
Cute mower! What do you use for hills The Vride?
V Ride, Toro grandstand... Whatever I got. I'll run anything on a hill I ain't scared😉
Amazing video bro 👍
Thanks buddy
Good deal. Will be fun to knock out back yards quickly.
Sure will, I like it
The music at 13:06 reminds me of a retro video game sound track.... Not sure what game but def heard it before
👍👍
That’s an awesome deal! The seller can drop the 42 here in South Carolina lol
Lol nice. Yea it's a steal I couldn't pass it up
Randy I would recommend you the flex tape I use flex tape to seal my gas tank two years ago and it worked for a couple months just fine Great video keep it up
Where do I get that? Just Amazon or eBay?
@@CountrysideStrong it’s cheaper if you buy it from Amazon
@@CountrysideStrongyou can also try epoxy putty that might work as well for a gas tank but you have to make sure the gas can is clean and then apply it
@@CountrysideStrong you could also look up on Amazon fuel tank repair kits and they have some that may work as well
Smoking deal, love my little 36. Keeps me from push mowing andncuts down anything.
Absolutely, I agree
Pretty decent machine, Randy.
Has anyone noticed the Go Kart hung from the ceiling in the shop? That would be a nice thing to get running again.
Lol ya it's my buddies. If he don't do something with it soon I'm going to
Son of a gun snow can you believe it I can we had 3” yesterday and it’s still on the ground 🤷♂️ anyway hope that stander works for you bud 👍😎
Done with snow. Yea this thing is a great asset
Friend , your as enthused with snow removal as I have been for ten years, hate it. This is the first winter I am dropping so I can travel a bit on the off season.
Ya every year I say I'm done 🤦🏼♂️
I need a stand in so bad! Something I’ve learned buying used equipment... they are selling it because something is wrong with it! Everytime I buy a used mower it goes to the shop. I’m starting to now learn what to look for
Yea you take a chance every time. I'm lucky that I can fix it all myself and have the shop and tools to do it
$2500 is a great deal for sure! Nice 👍
Thanks
Great mower bro
Thanks
Yeah those trucks are sweet
👍👍 that's right Spency-poo 🤣🤣
Look at JB weld, pretty sure they make some that would work on that gas tank.
Thanks
Had the plow and salt spreader packed away. They are both on the truck. 3 zero tolerance properties that are still under contract. Can’t take the chance. I like you would rather error on the side of caution !!!
Yea sometimes ya just gotta bite the bullet
I know I’m late to the game but there’s a product called Seal All that will patch that right up. You can get it at most hardware stores and gasoline does not damage it. I’ve used it several times to patch gas tanks and gas cans.
I bought a new tank but thanks for the feedback I might fix that one anyway
I just picked up a old 48in scag walk behind mower that is belt driven and now I am looking for a 2 wheel sulky lol
Ouch. Be careful. Belt drives don't like velkes. They'll do it but you literally cut that transmission life in half. I've replaced a few. Find one on eBay and keep it as a spare
@@CountrysideStrong right I know the motor was a 12horse but the guy I got it from but a 14horse Kawasaki motor on which I like and I need a grass catcher for it too
More power is better but that doesn't do anything for the transmission. Just be prepared. It'll get the job done, just have a spare so not much down time
@@CountrysideStrong ok thanks bud
Who knew fuel tanks would be so expensive? Even the after market ones are pricey.
Yea that's crazy. It's friggin plastic molded
If you want new and affordable get a 36” or a 32” bradley stander. $5,000 new. Hustler also has one for $4,500.
J B weld makes a good J B weld for fuel tanks and it works great
I was thinking the same thing
hell yeah brother helluva good find and if you want to know the year of the morew look at the serial which should be under the Engine and go to Wrights website it will tell you the year and the Day it was Built
Thanks buddy
@@CountrysideStrong i gotcha brother man
Put a lot of layers of that flex seal it should work
👍👍
Randy I hope you don't have to plow. I really like those videos but not April 21. I hope I don't have to shovel. Nice mower that will work Nice for you. Take care
I agree 100%. Thanks I really like it so far
Drain your tank , clean the fiberglass off Use a cheap soldering iron and some kind of plastic and melt in the hole or crack I fixed a tank on scag like that
👍👍
Wow $2500.... Sweet price, yea get the air filter cover, new tank and anything else it may need you will still be under $3000 for a low hour stander.
Absolutely
You’ll be taking on every small yard you can find
Lol why not
the kawasaki kai motor makes it probably an early 2000’s. i had i believe a 2008 motor that had a kai.
👍👍
I would order a new tank, you know how they get in the sun and pressurized. You don't want that letting go under pressure and start squirting all over your other mowers on the trailer and make a scag toro wright smores. With that low hours its worth putting the new parts on
I agree
Use jb weld big hoss . I use it on all my fuel tanks for my demolition derby cars no leaks
I ordered a new tank
@@CountrysideStrong just thought I'd give ya an idea save some $
New mower the bumble bee
Yup yup
Nice choice, Have I mentioned that I sold you so? You really should have bought a stander 36 (or 32) to begin with instead of a walk behind. The walk behind is kind of clunky in comparison to the stander.
Yes you did and you're right. Way better off this way
@@CountrysideStrong That was me trying to troll you, and you reverse trolled me by just agreeing.... well played grasshopper well played
@@KenMrKLC 😉👍
Permatex fuel tank repair , it’s a two part putty stick
👍👍
Turns out that’s the Wright Stander SM
The what?
Can i have it?
She's small but it's thing you need to get into tight spaces
Hell ya
@@CountrysideStrong 😎😎👍👍
Try taryl putty it is fuel resistant from taryl fixes all on you tube he fixes tanks with it all the time
Check out usplastic . com. I found them when I thought about buying a propane John Deere mower that ran on propane. I wanted to convert it back. Also I think JB weld has a fuel safe putty. I can't remember which one but i used it to rebuild part of a carb that I destroyed sending a bolt halfway through the wrong hole. It's been on it for years and hasn't failed yet.
That's what everyone keeps saying. I'm gonna try it