FREE HEAT for Our Boat! NO Extra Running Costs!

Sdílet
Vložit
  • čas přidán 3. 02. 2023
  • 💥 Our next huge challenge is the Northwest Passage this year (2024). Live updates, map, info: www.alluringarctic.com
    👍 These videos are crowdfunded! You can support the creation of the videos through Patreon:
    / alluringarctic
    Patrons get access to ad-free videos, WhatsApp chat group and a boat tracker map with a list of ALL of the anchorages and harbours so far (since 2020!). Thanks for your consideration!
    👕 Organic t-shirts & hoodies + stickers: alluringarctic.myspreadshop.com/
    📸 Instagram & Facebook:
    / alluringarctic
    / alluringarctic
    💼 I sometimes post CZcams/business related stuff on LinkedIn:
    / juhokarhu
    ✉️ Business enquiries: juho@alluringarctic.com

Komentáře • 432

  • @AlluringArctic
    @AlluringArctic  Před rokem +128

    hey everyone! i wanted to publish this video because i haven't seen this particular type of a heating system on many boats... AND it is very cheap to install and free to run (when you're motoring). The snowy conditions in the thumbnail start in the next video, which I'm already putting together, and we'll get to test this thing even more thoroughly... Thanks for watching!

    • @anthonyrstrawbridge
      @anthonyrstrawbridge Před rokem +2

      It's not actually coolant at all - is it. Heat transfer fluid makes more sense - doesn't it. The radiation type heat exchanger is very effective at transferring heat over it's surface area quickly - isn't it. Very nice - share.✌️♥️👍

    • @anthonyrstrawbridge
      @anthonyrstrawbridge Před rokem +2

      @@OKuusava The HTF cannot cool the engine.

    • @paulkenney5846
      @paulkenney5846 Před rokem

      Good idea I enjoy your video’s

    • @philgray1023
      @philgray1023 Před rokem

      With our frosty winters, where it sometimes gets down to 12°C we probably won't be installing one, but I often wondered about installing a car air conditioning unit to cool the boat. It was 32°C at 11pm last week. Humidity around 90%. Note that we do feel the cold even at 20°C, because you become accustomed to heat.

    • @philgray1023
      @philgray1023 Před rokem +1

      @@anthonyrstrawbridge I found our chandlers only sell stuff labelled "Coolant". Apparently it transfers heat from the engine to water from the sea. Who knew?

  • @Coyotehello
    @Coyotehello Před rokem +64

    You are going to love that heater. One thing to keep in mind is to put the bus heater in a location that has clean air, so the fan pushes clean air through the radiator, otherwise the air coming out of the heater is going to be smelly.

    • @AlluringArctic
      @AlluringArctic  Před rokem +22

      yeah, i'm glad this locker and the bilge are not smelly! but definitely don't want to suck in the air directly from the engine compartment 🤓

    • @matthiasmai9074
      @matthiasmai9074 Před rokem +9

      You probably don't have to worry about cooling the Motor to much because the Motor probably will have a bimettal thermostat that just opens up the coolant loop when the minimum Temperatur has been reached. Here a Video about an yanmar Diesel as well at 4:20 it is explained in Detail czcams.com/video/aZv4IXFPMqg/video.html

  • @vernaclevinger5716
    @vernaclevinger5716 Před rokem +43

    Those of us that have never had boats are interested in everything. The problems like heating and cooling are interesting because we don't think of them unless we're without them.

  • @kellygrannis8024
    @kellygrannis8024 Před rokem +63

    Not a mess. It's a technical area!

  • @ghhammer3498
    @ghhammer3498 Před rokem +35

    Great video Juho and Sofvi. This trip into the Arctic will be Tremendous.

  • @johnlawrence7268
    @johnlawrence7268 Před rokem +19

    Hello Johu and Sohvi. I'm a retired sailor from the UK and now only get my sailing "fix" through CZcams sailing channels like yours. I recently discovered your channel and have binge watched all your videos from the day you found Lumi. I really like your channel and while I was very interested in the whole refit programme, I prefer videos of the actual passages and look forward to "sailing" with you from now on. I have sailed where you are now, in the Gulf Islands between Canada and Vancouver Island in 1983 and again in 1984 when I was living in Canada albeit 1000 miles from the sea! I found it to be a great leisure cruising area and had places with pretty names like Secret Cove and Birds Eye Bay. I have also sailed in your home waters of the Baltic but mainly around the Danish islands and southern Sweden. I have also sailed into Stockholm and Helsinki but that was in a cruise liner! I noted you say that sailing CZcams channels centered on southern latitudes attracts more views but many of them are just booze and bikini videos and having seen you dump the Tequila and that you intend to sail in the colder north, I'm happy to think you won't resort to that! 🤞 I'm pleased I found your channel and I hope you'll let me sail along with you. Bye, bye, John

    • @AlluringArctic
      @AlluringArctic  Před rokem

      thanks John and great to hear about your experiences! welcome along!

  • @danagovang2520
    @danagovang2520 Před rokem +12

    We installed a similar bus heater in our Hughes 38. Ours was smaller and had a quiet single speed fan. I installed a valve between the in/out hoses to regulate how much went through or bypassed the heater. It was great to have a toasty warm cabin after we anchored. We spent 14½ years cruising those same waters year round, and a heater makes a big difference.

  • @miketee2444
    @miketee2444 Před rokem +5

    Love the lines on the new Boat. I loved the tank you started this channel on but this one is yours. I'm not a huge cold weather lover and not even a big sailor but when the water is in your blood the respect is all the same. You've got a great channel and I sure hope it does exactly what you wish. Regardless y'all are living that not always easy but very envious life and it shows. Good sailing to both of you.

  • @viltfjall
    @viltfjall Před rokem +12

    I mounted a simular (but way bigger) defroster on my 40ft steelboat. It was not often used in very low latitudes but I found it VERY useful when motoring in hot rivers closer in the tropics. To be able to extract HEAT when it’s very hot makes the engine (and captain) very happy :) GREAT VIDEO as usual

    • @Rodrifuuu
      @Rodrifuuu Před rokem

      Did you direct pipes to a porthole?

  • @brandonboand
    @brandonboand Před 5 měsíci +2

    So happy to see your staying warm, I have to tell you how refreshing it is to see your journey as the vast majority of sailing channels are of the warmer climate. I really enjoy You sharing your awesome journey ❤

  • @fredwilliams6843
    @fredwilliams6843 Před rokem +8

    Sochi/Sochi:
    So happy you both are safe. Interesting video on how to heat you’re sail boat in frigid temperatures.
    I’m surprised your engine does not have a temperature gauge. Sohvi made a cameo appearance and that’s all most of need.
    Stay safe.

    • @jonnenne
      @jonnenne Před rokem

      It just has an overheat sensor. Most sailboats I have been on don't have temperature sensor, only overheat sensor

  • @NailsofNorway
    @NailsofNorway Před rokem +6

    You will love this heater! We have the same consept that was already installed in our Finish made Tristan boat when we bought it😉. Ours has 3 vents near the windows and is amazing to use in the beginning and end of each season. It's also great for removing condensation on wet summers days🙂

  • @KA7ISVtube
    @KA7ISVtube Před rokem +4

    Juho, I enjoy ALL of your videos, both sailing and DIY! You are living the dream my friend. Happy Sailing......

  • @SailingSeaDreamofClyde
    @SailingSeaDreamofClyde Před rokem +4

    Glad you made into Annette! Beautiful spot. You have been looking around my boat for a suitable location to install heater like yours! Looks like a simple install. Thanks for sharing.

  • @xmarksthespot5188
    @xmarksthespot5188 Před rokem +5

    Installing a temperature gauge would be an asset as you'll be able to monitor engine temperature and diagnosis of engine problems before there's a catastrophe . What sensible addition to your floating home !

  • @karlfair
    @karlfair Před rokem +6

    Nice addition, make sure you get all the air out of the system.
    If you need more output from the stock Yanmar alternator, you can add a manual control to bypass the internal voltage regulator. It's not hard to do. Just don't forget when you have it turned on. If you're interested, I could email how to instructions.

  • @claudiadienst886
    @claudiadienst886 Před rokem +5

    Thank you for the great Video, I realy Like the mixture of sailing, refit and practical tipps. That helps us a lot.

  • @SailingTipsCa
    @SailingTipsCa Před rokem +4

    I installed a bus heater like this in my last boat and loved it! I installed it under the navigation table so the intake was drawing and reheating cabin air which made it very effective. It’s also easy to install a fan rheostat for speed control which is basically what your car has too.

  • @ConvergTV
    @ConvergTV Před rokem +1

    Great video! I was checking my boat today for water heater and warm air heater installation. You answered some of my questions.

  • @waterdog226
    @waterdog226 Před rokem +8

    Staying dry is a challenge when the outside gets quite cold. Many people are discovering this right now in their homes on their windows during the severe cold snap we are experiencing.

  • @scottholman3982
    @scottholman3982 Před rokem +3

    Beautiful anchorage! The heater is a good addition to the boat, as keeping the boat dry is a real challenge in cold, damp climates.

  • @pplusbthrust
    @pplusbthrust Před rokem +42

    Sure would seem a good idea to install a temperature gauge.

  • @jphusta
    @jphusta Před rokem +2

    I love the “technical section” on your boat. I got a couple of those myself, almost identical. Great idea with the bus heater, lots of lobster boats where I live are fitted with the same. If you ever plan to come to Maine, which I doubt you are, come to North Haven Oyster Co. for all you can eat oysters! Safe travels!

  • @doverivermedia3937
    @doverivermedia3937 Před 5 měsíci

    VERY interesting and insightful. Thank you for sharing your amazing experiences. I'm so glad I discovered you and subscribed yesterday. Best wishes from England ... 🇬🇧

  • @android61242
    @android61242 Před rokem +6

    I am enjoying the more frequent uploading.

  • @meandmybuddy964
    @meandmybuddy964 Před rokem +3

    Glad to get a new video thanks friends safe travels always

  • @lory2622
    @lory2622 Před rokem +4

    This might be a repost, I can’t find my first post. I am in Campbell River, it’s on your way north. If you want a warm shower and a stay in our guest suite it’s yours for the asking. I would be happy to pick you up and drop you off, we’re minutes from the harbour.

  • @Eriktaylor85
    @Eriktaylor85 Před rokem

    a fantastic addition to any boat. I installed one on my beneteau 352 and it keeps the cabin at a comfy 20-24c while the motor is running. On the 352 it is a very easy install in the same area as the hot water tank, almost as if they had intended to add one and forgot

  • @petermcminn9508
    @petermcminn9508 Před rokem +2

    Great episode. I tore out the leaky old bus heater in my boat and looking for a replacement- thx for the reminder to get to it! I like the suggestion to replace the fan with a low amp computer fan.

  • @Mark-sp6vq
    @Mark-sp6vq Před rokem +6

    I just love this channel! You guys are great!

  • @bchost
    @bchost Před rokem +2

    Another suggestion for you in regards to the heater... keep a Pipe Coupler handy in case that heater does leak. Then it's easy to bypass it. Or add a bypass valve to keep things running with heater out of the loop... No I'm not a plumber, just trying to help out. Thanks for sharing your adventure and welcome to Canada!!

  • @lancedaniels
    @lancedaniels Před rokem +3

    Glad to hear the heater is working fairly well for you guys.

  • @georgepeat5269iearth
    @georgepeat5269iearth Před rokem +3

    Nice work. Enjoyed your presentation. Good health to you!

  • @joyceb.sachsesachse1242
    @joyceb.sachsesachse1242 Před rokem +13

    Love you guys , and enjoy all videos you create , they are all good mechanical or sailing and they are all apart of the sailing life and repair and up grades are always need to be high on the list....Love both of you and the adventures getting back home.

  • @mvlas4385
    @mvlas4385 Před rokem

    When we were building our old boat We scored a few motorbike radiators and put them in a box with 12V computer fans. Also installed 3 alternators 1 for 24V houshold, 1 for the 12V household and 1, 12V for the starter battery. In the boat we used those " english" wall socket so all appliances got the same connector without the risk for the wrong voltage or polarity. ( conector fit just in one way in the connector, the 12V and 24V sharded the same ground on the engine.)

  • @johnhayford5946
    @johnhayford5946 Před rokem +1

    Installing a bus eater was one of my lockdown projects on my 42ft Beneteau. The engine is the usual VP55hp, with no header tank, and has the usual hot water heater fitter. The first decision was to fit it before the hot water heater or after. I went for after so the HW heats up first. However, this does mean we have to wait for the HW tank to heat up before we get any usable hot air. Typically this can take 1-2 hours of running, but once it's all warmed through it chucks out the heat. I have temperature gauges on the engine and seems to run at the same tamp as before.
    From some research it looked like the additional coolant in the system needed a header tank, so we fitted one as well.
    I ran the outlet ducting into the existing Wabasco ducting, (with a check valve) so minimal extra sound when it's running.
    I noted another comment about fitting a Y valve and drawing air from the cabin or from outside, which is just what I did, add this to a full insulation project and heat/condensation is no problem. Well almost, an unexpected problem is that the 5KW Wabasco is now too big and we often get 28c in the salon, before the heater cuts out, but when it's well below zero c the Wabasco just ticks over at minimum and all is good.

  • @virgilviereckjr.6881
    @virgilviereckjr.6881 Před rokem +1

    Thanks for sharing.
    Great video, and the information on the heater. Take care, all the best, and God bless.

  • @flossey100
    @flossey100 Před rokem +3

    Thanks for sharing and enjoy all of your videos ❤❤❤

  • @davidc6510
    @davidc6510 Před rokem

    Great information on an easy addition to any boat for high latitude sailing. Thanks for sharing.

  • @markusandgreta4941
    @markusandgreta4941 Před rokem +1

    Heat! Interesting system. Like an auxiliary radiator. Good information. Welcome to your first anchorage in Canada! Bienvenue (from Québec!). 🇨🇦🇨🇦🇨🇦

  • @Carpentersspecial
    @Carpentersspecial Před rokem +1

    Welcome to Canada, enjoy your stay.

  • @martinpaquette2631
    @martinpaquette2631 Před rokem +1

    Thank you for coming to visit Canada 🇨🇦!

  • @theislandpackrat
    @theislandpackrat Před rokem +1

    My boat had two big ones in the cockpit for cruising in cold climates with two fans on each one. First boat I've seen with them in the cockpit. I took one out to put inside also! there engine heated also. I have a kabola hydronic diesel heater that does the water heater and all the boat also. A great system!

  • @lartzam
    @lartzam Před rokem +1

    This is awesome! I've been recently looking into water-heat-pumps (like an ilmalämpöpumppu but for water) might be something interesting for you too.

  • @markchodroff250
    @markchodroff250 Před 5 měsíci

    I have seen this on a lot of boats , some of them have small radiators in each room that run hot water in a loop for the system, also it can be plumped to your hot water heater so at dock your making hot water and heating your boat ? I guess for a winter boat it’s a must !

  • @parallelkinematiker
    @parallelkinematiker Před 4 měsíci

    thank you for this interresting video. It is really a very clever idea. your channel is the most inspiring channel for me.

  • @bruceyoung1343
    @bruceyoung1343 Před rokem

    When your cold, you will take heat wherever you can get it. So glad making progress. Be safe

  • @JaapVersteegh
    @JaapVersteegh Před 5 měsíci +2

    This is some new meaning of the term "Free" I wasn't previously aware of :p

    • @ThePatgilbert
      @ThePatgilbert Před 4 měsíci

      Thank you for mention it ,i was thinking same ,, hes non english speaking citizen so free as probably a new dimension to him here

    • @x--.
      @x--. Před 7 dny

      Yeah -- free relative to another form of heating, maybe? How much electricity would it take to get the same BTUs?

  • @Orbacron
    @Orbacron Před rokem +2

    Yes, it is a heat exchanger, there are also some made for a fireplace. You may decide to install 2 or three of them in parallel

  • @patricksmith252
    @patricksmith252 Před 4 měsíci

    Wish I had found this channel a couple months ago. I live in the Seattle area and would have loved to pop over to Neah Bay and say hello. I know you're way up in AK now, so stay warm and enjoy the skiing!

  • @dick8193
    @dick8193 Před rokem +4

    Very interesting video. Lots of different skills involved here.

  • @astronorthwet636
    @astronorthwet636 Před rokem +4

    That’s a great idea. I don’t know why people haven’t done this before!❤

  • @geirsimonsen259
    @geirsimonsen259 Před 5 měsíci

    Hello..!! I have installed some of these, and have always mounted an easily accessible valve on the inlet of the heater. Some have also swapped the switch for a stepless variant.

  • @robertweir8958
    @robertweir8958 Před rokem

    Hi Juho, thanks for the VLogs - love your approach. I wanted to comment on your choice of music during the early parts of this video (eerie/haunting slide guitar?) it reminds me of another of my favourite cold climate Vlogers 'My Self Reliance'' - music and log cabin building freom scratch (no words) - also in Canada. You might like it. 🙂

  • @scarletbegonias2359
    @scarletbegonias2359 Před rokem

    I found this video very interesting. I really appreciate you trying to accommodate all of your audience's interests.

  • @Ozziesboy
    @Ozziesboy Před rokem +2

    😘 More Sofvi please, but good job on combining changing coolant and install heater all at once. until next video smooth sailing my friend...

  • @downundertruckerusa4733
    @downundertruckerusa4733 Před rokem +2

    The slower the fan the hotter the air will be.
    I so enjoy your videos

  • @davidhakes3884
    @davidhakes3884 Před rokem

    Good Idea on the heater, I have a couple of early pickup truck heaters that would work for me.

  • @clint4004
    @clint4004 Před 8 měsíci

    Probably mentioned before but that has saltwater flowing through it so it could corrode and that will just pump water all over. So i think you should put two ball valves in and two tee's so you can bypass it if you spring a leak... cheap insurance...love the show

  • @honey8784
    @honey8784 Před měsícem

    Boat looks great. The restoration was phenomenal, It’s one of your first, I recommend follower’s go view it.

  • @JohnSmith-cx7zt
    @JohnSmith-cx7zt Před rokem +2

    So brilliant and resourceful.

  • @DougVarble
    @DougVarble Před rokem

    Thanks for the heat information 🎉. Keep the videos coming

  • @1218omaroo
    @1218omaroo Před 8 měsíci +1

    Ye gods, at those temperatures your condensation issues must be monumental. Great channel! :)

  • @SailingTeamTallyHo
    @SailingTeamTallyHo Před rokem

    My fathers 38’ boat on Lake Superior had one of these decades ago and also a standalone diesel heater. Lots of 100mi+ trips in near freezing and occasionally below weather. Heaters were not just nice to have, they were life critical sometimes. The radiator heater worked like a champ. Stand-alone drew too much battery and didn’t output the BTUs…it was not used often

  • @robertcarkeek8391
    @robertcarkeek8391 Před 4 měsíci

    I JUST LOVE YOUR VID POASTS. they bring light into darkness. for me!

  • @dnswhh7382
    @dnswhh7382 Před rokem

    You should also consider to watch out for air bubbles you might have brought into your cooling system during the construction. This might cause local overheating of your engine during the first test drives if you’d go for full throttle right away and besides you should check the coolant level regularly for the first few days of use. Once any remaining air is finally blown out, the coolant level will be accordingly lower then. Have a nice trip!

  • @solexxx8588
    @solexxx8588 Před rokem +3

    If you restrict the ocean water cooling to the engine with a temperature control valve, you can get a higher temperature to your heater and water heater and maintain your engine cooling.

  • @Craneman4100w
    @Craneman4100w Před rokem

    Yes it matters which line is in and which is out. Look carefully at the inlet and outlet of the heater. If one of them is from the top of the heater, that is the outlet. It matters because if the bottom line it plumbed as the return, the radiator will not purge the air and you will only get a portion of the heat you should get from it.

  • @ignomoly
    @ignomoly Před 11 dny

    thanks for a peek into your life... and the ideas...

  • @TheMegafreakxD
    @TheMegafreakxD Před rokem +2

    Great Video, thank you for the information

  • @weggemann
    @weggemann Před rokem

    Thanks great information regarding the heater.

  • @peterleyland4793
    @peterleyland4793 Před rokem

    It, is a fine video , thanks for showing us the heater and not footage of either flesh or food like most of the
    Other channels do, I guess that the new heater will rob some of the heat from the calorimeter but no system is without a down side .
    I still think you bonkers sailing in such cold conditions but its great to watch from my cosy armchair !

  • @bassrvr1
    @bassrvr1 Před rokem +1

    Thanks! Thoroughly enjoying your videos!

  • @graemefenwick6925
    @graemefenwick6925 Před 28 dny

    4:15 Technical area, classic :D. I have a bunch of those.

  • @HansKoudenburg
    @HansKoudenburg Před 10 měsíci

    It's nice to read " our boat" in stead of "my boat!" 😂 I am really enjoying this vlog!!! Stay safe!!!!👍👍

  • @janemckay8705
    @janemckay8705 Před rokem

    Looks like a fabulous product.

  • @Vince-ml9gw
    @Vince-ml9gw Před rokem +1

    Nice work Juho!

  • @nena4215
    @nena4215 Před rokem +1

    Always interested in heaters, thanks!

  • @t.c.973
    @t.c.973 Před rokem

    Great video!
    There are Chinese diesel heaters available for fairly cheap that can operate on 12volt. People are using them for heating vehicles, garages etc. They cost about $150 and you can use mix half of fuel tank with used motor oil to save money and it burns clean. It could be another option. If you google Chinese diesel heater you'll find lots of info on them. Cheers.

  • @rcmoot
    @rcmoot Před 4 měsíci

    Good idea on a shutoff valve. Nice job.

  • @netrhyda8761
    @netrhyda8761 Před 9 měsíci

    Shared bodily warmth works pretty good as well, and it's free......☺

  • @acidreign8551
    @acidreign8551 Před rokem

    For what you guys are doing, this is a good thing. The more ways to make heat the better. As for the amp draw, on the low setting i doubt it pulls 10 amps, the 10 amp spec is more than likely if you have it on high, Use a clamp on amp meter on any wiring to see amps are drawn for sure, they don't cost much, and is a good thing to have on your boat. It also doubles as a clothes dryer, so a pretty good deal! 😄

    • @AlluringArctic
      @AlluringArctic  Před rokem

      yes, you're correct, not sure if i mentioned it but it's 10 amps at full fan speed. 4 amps at minimum.. we have a clamp-on meter :)

  • @PCStuart1
    @PCStuart1 Před rokem

    Hello Juho and Sofvi, yes I am interested in your heating systems, "ones that work". interestingly everyone who needs heating in their boat uses more than one means of heating. Oh yes also watch to see Sofvi sunbaking on the deck ..... hahaha .... but seriously I am planning to do something similar to the NW Passage.

  • @mazdamaniac4643
    @mazdamaniac4643 Před 2 měsíci

    Always great videos. That heater looks very similar to that used in old Austin Mini's, one thing of which is that it *does* matter which way you plumb in the heater pipes.
    Our Mini only ever blew _warm_ air, not HOT like it really should, until I flipped the pipes so that coolant flowed in through the bottom connection and out through the upper one.
    It turns out that the 'normal' way around forces an airlock into the top of the heater, making it perform poorly as it was only half working. Flipping the hoses drastically improved this.
    It may eventually collect some sediment in there, but that takes literally years of neglect to happen, so the overall benefit far outweighs this very minor con.

  • @shaunroberts9361
    @shaunroberts9361 Před rokem

    Right on you 2 are back on the water. Man i live in Sacramento. I wanted to go to SF so bad and meet you 2 darn it. Now your gone Darn it. Well awesome i am so happy for you 2 to own your own boat. I have watching Salt & Tar. They made it to Mexico. Do you guys talk to them and keep in touch ?

  • @egocrusher8
    @egocrusher8 Před rokem

    Excellent video as always!

  • @billbaxter2914
    @billbaxter2914 Před rokem +1

    Great video. Thank you.

  • @mrsteamhorn
    @mrsteamhorn Před rokem +7

    Music is cool in this episode

  • @Tomm9y
    @Tomm9y Před rokem

    I would run another outlet to the lowest/ furthest point(s) in the cabin. That way the air is circulated regardless of height/location. Removing excess humidity from the cabin would also be worthwhile. A dehumidifier could be run intermittently. Perhaps, have the ability to divert air to a drying locker, even a separate hanging drying locker. That way you can dry sailing/other gear.

  • @douglasthompson2740
    @douglasthompson2740 Před rokem

    I think you might find it far more efficient to have the heater recirculate the cabin air when you get to the really cold temperatures. A 'Y' and a flapper valve could be plumbed in to give you your choice to match the weather conditions. Those heaters are pretty common around SE Alaska. You can wire it with a rheostat switch to give you a selection of how much air you want and reduce current draw. Just the way it is in a car.

  • @LucScheffers
    @LucScheffers Před rokem +4

    Thanks Juho! "So now i have technical draws, closets and rooms. And yes even my bedroom has become very technical indeed:D As for the heater, thanks for showing! For the noise, a reduction that is, one could put it in the sound proved engine compartment and run a hose to the cabin outlet.

  • @spiritualoutdoors7759
    @spiritualoutdoors7759 Před 8 měsíci

    Good idea and great job.

  • @MrHealey01
    @MrHealey01 Před rokem +1

    Please can you check airflow, it’s difficult to determine from the video but I believe the hot air from this unit is being drawn from the engine bay. The technical locker appears not to be wholly isolated from the engine bay. If I am correct you can draw escaping combustion gasses and oil breather gasses that you may not normally experience. In a vehicle installation the engine firewall has sealed through holes for cables etc. this is a risk mitigation for carbon monoxide poisoning. I hope you do not experience such but you may wish to check the airflow, spraying strong scent into the engine bay could help you. An engine leak may become a serious issue if you are drawing air from the engine bay. Safe sailing.

  • @ihmesekoilua
    @ihmesekoilua Před rokem

    I have a (too loud) Eberspächer (Kalori) heater and another one that is all stainless steel which is manufactured by Autoterm (formerly Binar/Planar) I think, at least marketed as such. So there are stainless alternatives as well, slightly more expensive tho.

  • @frikus
    @frikus Před rokem

    Great stuff :) keep on, good explanation on how to, and what happen next ;) I'm just worried about, what temperature this kit generating throughout the wood wall, you have hooked this into, safe measures ;) kudos

  • @baxterscientific
    @baxterscientific Před rokem

    If you have an exhaust leak you will suck that air through the heater. Make sure you have a carbon dioxide alarm in your boat where you sleep. This way if it is on when you are sleeping you are safe. Looks great! Beautiful scenery.

  • @alan-sk7ky
    @alan-sk7ky Před rokem

    Juho, perhaps in due course maybe a bus heater out in the Doghouse might be a welcome use, given as you say motoring a lot in the winter, I presume you will make a canvas back eventually to keep weather out and heated cockpit would be nice eh 🙂

  • @tomatobrush3283
    @tomatobrush3283 Před rokem +3

    If you have a dry cupboard i would pipe a ducting to the cupboard that will dry it quick if its a dry cupboard. Use a Y duct to take a duct off to different areas of the boat.

    • @AlluringArctic
      @AlluringArctic  Před rokem +7

      we actually have an existing ducting for the forced air diesel heater, we could duct into that in the future. Right now no time for that, busy sailing ;)

  • @kardyify
    @kardyify Před 27 dny

    Thanks!

  • @marcelocheves
    @marcelocheves Před rokem +1

    Hello, if you allow me to give you an advice, try to adapt some air filter close to the air intake of the heater, it will be a pain in the neck when you will need to clean the dirty radiator, you can build some kind of wooden box to fix the air filter on the back of the heater fan. Sorry for my english.

    • @AlluringArctic
      @AlluringArctic  Před rokem +1

      This is a good idea actually, a big simple filter would be nice. I can imagine this can gather a lot of dust and I would have to unmount it to clean it!