Yamaha zuma scooterswapshop wheelies
Vložit
- čas přidán 3. 08. 2024
- I've been asked a few times about my personal prebug, and decided to take some time to share the details, how its built, why it works for me and what can be expected of a build like this! BELOW I've linked the main components used on this build. Feel free to get ahold of us to do a bike setup like this! Thanks and have a great day
12" wheels, LAST OF OUT INVENTORY
www.scooterswapshop.com/produ...
Exhaust
www.scooterswapshop.com/produ...
Carb
www.scooterswapshop.com/produ...
Variator kit
www.scooterswapshop.com/produ...
Taillight
www.scooterswapshop.com/produ...
Crank
www.scooterswapshop.com/produ...
Fork shims to fit ruckus/dio forks
www.scooterswapshop.com/produ...
BIllet sliders
www.scooterswapshop.com/produ...
Trailtech gauge
www.scooterswapshop.com/produ...
Tank/tool bag
www.scooterswapshop.com/produ...
Cylinder
www.scooterswapshop.com/produ...
Ncy forks
www.scooterswapshop.com/produ...
Support your USA shops!
HTTPS://WWW.SCOOTERSWAPSHOP.COM
HTTPS://WWW.SCOOTERPARTSHOP.COM
PLEASE LIKE SHARE AND SUBSCRIBE! Make sure to click notifications to keep up to date on the latest and greatest happenings. ALL parts come from our shop in Portland, Oregon!
Thank you for your support!
HTTPS://WWW.SCOOTERSWAPSHOP.COM
HTTPS://WWW.SCOOTERPARTSHOP.COM
Also, BIG thanks to SO DEF FILMS for the video help! Check him out if you guys need professional videography
/ sodeffilms - Auta a dopravní prostředky
Cool to see 2 stroke scooters in the USA, when in Europe it's common to see 2 strokes (Scooters,Mopeds,Motorcycles) riding on the streets legal.
yeah buddy
Yeah we’re a rare breed out here in tha states
Any EFI 2 stroke going on in UK or Europe? I It is happening with outboard 2 stroke engines and Feevalve electronic valves. This eliminates the need for a camshaft and/or a Cam shaft and connecting rods reducing reducing many reciprocating components and weight. Fiat Abarth and Bugatti Veyron use Frevalve also. If we don't go nuclear 1st, there is going to be a rebirth of super efficient, powerful EFI 2 stroke with electronic valves. As a fellow gearhead I had to share this with you guys, and get your thoughts? On the scooter stuff.. I have found a 2002 Zuma 50 with a 100 miles.. I would like to do A70CC upgrade with cannonball run reliability, and and off-road trail friendliness. I would like to get good gas mileage had a good cruising speed. Reliability 1st and gas mileage 2nd, are my my greatest concerns. Quality= Reliableity/Endurance.. Quality = Increased cost. Thank you, .S.S.S. 🛵 Y'all good people. I will be calling you.
I don't care if its a super bike, dirt bike, moped, scooter, anything...if its Custom and Clean I Like it..subbed! dope intro
That’s what I’m talking about thanks buddy! And enjoy :)
Portland, scooters, and no one has a knife-checks out. 😆
Just razzing. Pretty crazy what folks manage to get out of these things. Love it.
Dude. You mos def have stepped up the vid game. Lookin fresh.
Ed Miller yeah that intro! And outro is fresh
sheeeesh
In Europe It's named Mbk Booster
No thats just france
Anton nope also belgium netherlands germany
Carsspottedontheroad hmmmm, in my country they are known as Yamaha BWS, but thanks for the info never knew that
The Bw's is the new model.
@TheDarkHibrid Channel no, the 1st generation was mbk, from 2000/2001 was Yamaha
I absolutely love these videos! Can’t wait to pick up more parts for my Elite S. Finally finished de-restricting it.
Gonna keep an eye out for a prebug Zuma, you guys make them look so cool.
thanks so much! :) the elite is a fun build too
InCahoots best shop to go to
Wow that looks like a ton of fun!! Great video
thanks
This video is perfect with morning coffee 👌🏽👌🏽
yes sir
That's a booster. So clean and nice.
A zuma here
That Intro is so nice 😍
thanks
I loved the zuma i had living in south florida i rode it everywhere
nice
iam a big fan of your channel, greets from germany
thanks! we now ship there!
Thanks for the shout out
yesss
Great video
thanks
If if does so good on gas why did Chris run it out of gas last night 😂😂😂
ha
Nice!
thanks
I just found a 01' 500 miles. Cherry one. Be seeing your shop shortly. I want a similiar setup. No need to do 80 but a torque mid speed bike would be nice. This looks like the setup.
Yea it’s an awesome setup I love it
how much did you pay for it so i know what kinda value a good clean one is? thanks
@@dannymotovlogs4254 The friggin guy BACKED out of the deal. So pissed. I was gonna grab it for $1000 too. Such a kook
Mad Tiger TV usually around $1200 around here in clean condition
broo nice vid
thanks!
I love this. You wheelied right past my ex gfs house.
They do make aftermarket headlamps well maybe not in us but in eu stage6 makes some nice ones
Yea they make the bcd style but they Aren’t really good light output and they’re really ugly
@@Scooterswapshop well in eu they love them :)))) every single booster i see has some after market headlamps
sweeeet
sheeeesh
Cool video, can you show what you did to your seat to get that hump out of it.
we did a video recently
Does a 28mm round slide "pe" on what I'm told is a 100cc factory engine sounds right to you guys?
Got an 04 in extremely nice condition yasuni pipe tons of upgrade but the crappies thing on it is the 28mm carb that actually measures 29mm. It had a 138 main jet and I already ran a 152.5 drill through it and still feels like it wants more fuel, needle clip at the lowest too..
GIVE THE SHOP A CALL ASK FOR PAUL!
Take a look at a Gilera Runner 180cc 2 stroke, if you can get such a motorcycle in the USA its perfect. The Gilera Runner is the best motorcycle ever made!
I have a build serious going on my 180 runner right now! :)
Nice scoot.
Silly Q, where is the phone charging cord plugged on??
to a battery tender
Are the bars on your prebug the STR8 Downhill Handlebar in matte gold or did you paint it that color because they look a lot darker.
same as what we sell on the site
Even if that thing had twice the power 95 percent of us watching couldn't wheelie like that!l lol I had a 91 cr500r that needed the back brake under clutch or over would have saved my ass I used to do exactly what u doing but longer and usually till bike was about tapped out at 90 geared tall. Sick man . Asphalt doesn't give I wish like hell I'd had on some sliding gear
Cr500 is a widow maker. You need serious skill to ride wheelies on that one :)
Do yall have a fairing kit for the 2002 zuma? And anymods suggested? O want it quick but reliable
What size carb in the video ?
21mm?
Also, can you provide the jetting details . . . Main jet? Pilot jet? Needle position, etc
Thanks !
I have a 2020 rough house. What kind of protection should I pick up so I don’t wreck the plastic or lights?
we have highway bars that would help
What size sliders do you have on that 01 prebug? I just got the same year model.
all sorts of options
For a $300 scooter i bought off a coworker. I would have never guessed how popular they still are.
Its the only scooter ive ever ridden that can do a burnout completely stock
most scooters do burn outs
Thanks Brandon! Got a lot of stuff coming for swap shop and stuff from us! Get subbed to here and our page!
So Def Films hollllaaaaa
atcha boyyy
Could you put a spec sheet of what parts are on the bike?
Hi, if you want to get set up just shoot us an email and we can do that no problem!
Scooterswapshop
Please post them here
I have 2019 Yamaha zuma 125 I need some upgrade on the performance any tips?
call the shop we can get you squared away!
How much of this can I do to a bug eye I would like to get it as close to 50 mph I can and still make it reliable I pick up a two-stroke tomorrow. It's going to be a big task I think because I'm 6'1 and 240. I'm not worried about doing wheelies I just wanted to look nice and if I'm able to lower it down I doubt if they make a stretch for it anymore
call the shop we can get it all taken care of we can get you to 60-70 -80 if you want
Could you help me with the setup for my yamaha spy cw 50 rsp? Im doing a complete rebuild to 70cc vertical AC cylinder, exhaust, variomat kit, gears, clutch, bearings. But I need advice on compatible parts. I would also like to buy longer gears for more top speed.
Could you help me?
I want reliable fun machine. If it hits 60mph Im happy
call us!
What kind of fuel tank do you have in that Zuma? I’d like to have a longer range tank.
just the stock dual seat tank
Scooterswapshop Can I still mount my single seat on it?
@@andreww.6283 no sir
hey guys i have a 94 honda elite sr fully stock can i do that some built as your pre bug on the elite but im tying to be in the 60-70mph range to do some high end wheelies
Nelson Rodriguez east man! Those are some of our favorite bikes to build! Shoot us an email or call we can give you some options
@@Scooterswapshop yea you guys know what your doing over there and i love watching all your videos as well. keep up the hard work but whats your email
Nice looking bike, do you have any Peugeot speedfight?
We didn’t get them in USA. But we can get parts easy
@@Scooterswapshop oh right I'm in the UK so I was just wondering but might build it later on down the line.
do you have a link for the slidders and the polini bar ends ?
They’re on my website.
Scooterswapshop are the sliders easy to install on the rack for a 2005 zuma?
Great video, bike is awesome. Throttle response seems very snappy. I've got an 01 zuma with 70cc polini kit, variator kit, yasuni r pipe, polini carb. I've noticed when it's cold, it rips off the line and front end pops right up. Once it's warmed up, it sounds richer and isn't very snappy. Cant get the front to pop up even close to as easily. Just ordered some new reeds from you guys - could that be the issue? Not really sure what could cause loss of snappiness in power once it warms up
Sounds like an air leak
@@Scooterswapshop that's most likely it. I can see oil residue all near my intake. I'll put new gaskets in and reeds and see how she runs! Appreciate all the vids and quick shipping
@@kylewashburn6626 sounds like it’s getting too much air once the choke turns off that was my problem, had to put an air filter on
Im local to Portland. Came in to the shop a couple days ago. For. A zuma air filter its a great place
Thanks!
I have a yamaha jog 50cc and i want to install a 70cc bigbore kit..i would choose polini brand how do i go about to order....i did rebore the stock block but he bike overheats within 5minutes
We have several options online under the jog section. We’re happy to help you out with options just send us an email
Www.scooterswapshop.com
Hey, I'm looking to spend on my Yamaha jog 2001 about 1400 bucks what I can get from your shop? Can I have some of your recommendations, please?
It’s too hard to do it on CZcams shoot us an email and we can get you dialed in
More info on that vapor gauge please.
listed on our website and we have a full video on it!
@@Scooterswapshop thanks cuzz 🤙🏾
I HAVE 2008 ZUMA 50CC .MY ELECTRIC PUSH START BUTTON DONT WORK WHAT COULD IT BE. I HAVE NEW BATTERY AND 7 AMP FUSE ON THERE. I ONLY HEARD CLICK FROM THE STATER RELAY
Hi I would diagnose the problem to repair it
what parts i should buy if i want to wheelie my yamaha aerox
You can wheelie stock aerox pretty good.
call the shop we can set you up
Are you running the tall handlebar stem or the short?
tall
Always have rode a 4-stroke how much faster is a two stroke and does it get better gas mileage
4 stroke will always get better mpg. But far slower per cc
A 49cc 2 stroke with a little work can do 50 pretty Easily. It’s very hard to get a 4 stroke 49 to do 50 without lots and lots of work
@@Scooterswapshop does it matter the name brand of 2-stroke there's a lot of them I am willing to try one and yes it does takes a lot of porting and polishing for 4-stroke to get good top speed
Where to start and with what for my 49cc 4t?
Need More details I don’t know what bike you have
LMAO, I get the exact calls everyday and the same response when I mess with em. Student loans too. Gd telemarketers
it makes for great content
@@Scooterswapshop yes it does.
They do make aftermarket headlights for this scooter
yes
I have a 05 Yamaha Zuma Bws scooter. Every thing works. But it will not start up. Need help bad. Ty
Unfortunately there’s no way for us to diagnose a scooter that doesn’t start without it in person.
What 2 cycle oil do you guys recommend for scooters?? (zuma&dio)
Use the yamaha brand 2t stuff... always buy from your manufacturer
Wat kind of break handles are those nd some for my prebug????
They’re tunr we stock them
Fit on a zuma 2005 ??
A ride a lot of wheelies on dirt bikes, the scooter Zuma I was on l,wouldn’t lift the tire up! Wonder what I’m doing wrong
timing is key and variator
So the lighter the weights you can find would be better, 6 oz for example vs/ 7.5. Liter the weight the faster throws out face to belt, can you actually go to lite.
would your plastic sets fit a 2000 bws-r 50?
give the shop a call
In Finland it's named ankka.
nice
How tall are you?
Bike to your height ratio..
It's a goofy question but I'm 6'8" and I want a acooter!!
6 ft 1in
Which kit is on it pal is it polini sport or corsa
Corsa
Anyone got the idea what can couse engine braking on moped? I have that issue on my 98 zuma (actually booster here in Poland) that when i let the bike coast its feel and sound like its engine braking and im trying changing rollers but thats not the solution
your engine to brake? or break?
@@Scooterswapshop brakeing not breaking
The clutch engages at a certain rpm and doesn't let go until the rpm drops below I noticed this also so I tried stopping before rolling down a hill which It did freely coast though when I hit the throttle it engaged and caused me to slow down since it had the stock pulley ratio deceleration was harsh
What crank is he running? He says it’s a performance crank but there’s a different crank on the parts list. THANKS!
Is it the Malossi MHR? And if so, 10mm or 12mm?
Looks like you are sold out on the website . . . How often do you get these in?
Ma io i pezzi polini non li riesco a trovare ho girato tutti i negozi tu dv li hai presi?
hey
How much for that 200$ pipe that fits a Zuma 70 cc shipped to eastern Canada?
I’d have to know which model and an address to calculate shipping
We’re I can find. Part for. My. Zuma. Yw50 2019
Scooterswapshop.com
Where can i buy this naked bar kit ? really like the look of it.
On our website
@@Scooterswapshop where can i find the adapter to the forks so that the bars will go on?
@@Scooterswapshop by adapter i ment the stem, i watched a video from you where you guys installed the naked bars on the zuma, where can i find the billet stem you used?
Ok our website. We are an online supplier
I need a headlight like that (in black). can u help me?
I have one for sale in the used section on the website
I have a 2015 Yamaha Zuma 50f I want aftermarket parts what’s the best website???
Sell it . too slow
not much for that
I need a cut out engine cover for my bws zuma how can i get one pls
We could do it as a service but no companies make them any more due to them breaking. give the shop a call ask for paul and he can help you out!
@@Scooterswapshop whats the number
@@Scooterswapshop send the number pls need it
could you do a video on a 2021 Teyin Super 200cc
Sure if you bring us one we can
@@Scooterswapshop it's in pieces rn but if we can't diagnose it I'll hit you up
But which bore kit?
whole video on this bike on our channel
whats that blue scooter in the intro?
Search Zuma 125 twin cylinder on the channel you’ll see that bike
This looks like a build similar to Mopboyz pre bug.
you mean the mop boys is similar to this.... as this has been around for years
I actually lost my legs while chasing a rabbit over train tracks when I was 9.
Happens. I have lots of great stories with these Indian phone scammers
damn bruh.
Matowix 😂😂😂
I’d love to buy that Zuma if your willing to sell it
gave it away to a subscriber
I need help on how to tune the carb on my freshly built setup? Starts and idles fine but on higher revs it bogs down, when i tryed to ride it- doesnt go, just keeps bogging. Current main jet 127, with carbuerator it came with 90 main jet. Here is what i just built: Stage 6 sport pro mk2, stage 6 replica, doppler intake reed housing /w reeds, polini cp 19mm, malossi e5 filter, stage 6 skf bearings, motoforce evo crank, naraku clutch, naraku clutch bell, naraku variator, malossi kevlar belt
I really dont want to destroy my new cylinder kit while tuning the carb improperly
id say start with watching our cvt tuning videos. CVT is almost always the problem. Oh, and that motoforce crank will grenade on a setup like that.
Scooterswapshop Thanks, what do you think of the combination with cylinder and exhaust. Is it proper?
@@kazysbinkis682 ex and cyl is good to go
Scooterswapshop i just watched the video again of tuning a cvt after big bore kit or exhaust. But if my bike is on stand, i try to rev it up and on high rpm it just shuts off, isnt it a carbuerator jetting fault?
How big is the carb?
WE HAVE TRIED A FEW SETUPS
@@Scooterswapshop i want to buy a new one but dont know which size is better is for a 52mm minarelli 2 strokes
Hahaa i found out why my scooter would not crank i blew out one of the piston rings lol im upgrading the 49cc piston to a 50cc with larger carb.
ok
What year zuma?
Veridicus 2001
01
Also let me know a good combo just like that I can get off your website?
its actually on the site!
What would it cost me to have my stock prebug built like yours?
To do a build like this I’d estimate around $2-2500 in parts. Wheels brakes suspension engine parts fairings. Only think original is the frame and fuel tank.
Intro song name ?!!
secret
What’s the engine tho
It’s a zuma
Engine
Stock 50cc and you’re pulling wheelies?
Plz how much will something like that cost me sir plz
2500 or so in parts
That's a booster...
Zuma here in USA.
That's also known ans yamaha BW'S
bro could u please help me with a dope scooter build??? I was in a moto accident smashed thru a cpl trees broke my back neck, shoulders and 3 ribs, and also with a bum knee a full size motorcycle or street bike would just be out of the question..
can we please team up to make a dope lil ripper I can work out a price with you, if you would be interested in helping out a military family please get ahold of me I would love to tell you more about my situation..
take care and god bless, speed safely my friend
-Peter
email info@scooterswapshop.com
F.Chi from Thai Land
hi
I have Yamaha Zuma scooter 70cc.i want to sell it.its a 05.
Go for it!
Funny because in Europe scoot are only for children and when you grow up you buy a bike but cool for you
My last bike was a zx10r. Cool story though better luck next time :)
Yeah people tease me about my bugeye, i just smile knowing im having more fun and if i wanna get warp speed i can always pull out the blackbird...its just day to day and errands a two smoke that i can thrash without gibbing myself is much more fun.
ไทย
ok
What should i do with my Riva 125? Looks pretty cool without the plastics.
There’s no parts for those at all. I’d personally sell it as when something fails you’ll be searching on eBay for overpriced used items
@@Scooterswapshop yeah. I had to adapt a Vino carburetor to make it work once again.