Went CHEAP on this DECK
Vložit
- čas přidán 1. 07. 2024
- Looks like they went cheap on this deck build using 2x6's and 4x4's instead of 2x10s and 6x6s. #decks #deckbuilder #deckbuilding
Website: rigidinspections.com/
Blog: rigidinspections.com/articles/
Facebook: / rigidinspections
Instagram: / rigidinspections
Twitter: / rigidinspection
Zac Knoblauch CMI, ACI
IL License: 450.011629
Rigid Inspections, LLC
636-614-3234
Master Certified, ASHI Certified, serving St. Louis County and Saint Charles County.
Free Thermal Imaging included with every inspection.
_____________________________________________________________
**TOOLS I USE FOR HOME INSPECTIONS**
Atlas46 Tool Backpack (USA MADE): www.atlas46.com/online-store/...
Grip6 Belt (USA MADE): shorturl.at/inFUV
Gear Light Flashlights: amzn.to/3q4zAAO
Klein Tools Receptacle Tester: amzn.to/2MW2MbJ
Spectora Inspection Software: www.spectora.com/
GVS Elipse P100 Respirator: amzn.to/3EvQYT7
GVS Hard Carrying Case: amzn.to/3bqo3mR
GVS Elipse P100 Filters: amzn.to/2ZH6pc8
Headlamp for attics and Crawls: amzn.to/3GI9FF5
Xtend & Climb 9.5ft Ladder: amzn.to/3CEIs3F
Xtend & Climb 15.5ft Ladder: amzn.to/3GNcZyu
Werner 2ft Step Ladder: amzn.to/3jZbweV
Flir e8 Thermal Camera: amzn.to/2ZLunmm
Craftsman 4ft Level: amzn.to/3mDbtHm
Dewalt 20v Driver: amzn.to/3rpFsCi
Extech Moisture Meter: amzn.to/3rqRzie
Klein Voltage Tester: amzn.to/3oSF7WM
Craftsman 25ft Tape Measure: amzn.to/2MFgQ9R
Sperry 240v+ Receptacle Tester: amzn.to/3oSe7Xx
Smoke Detector Extendable Tester Pole: smdetpole.com/
Extendable Magnet: amzn.to/3kmhj1d
Extendable Mirror: amzn.to/3w8WqIB
Collapsible Cup: amzn.to/3CiiiUv
WORKPRO Foldable Utility Knife: amzn.to/3mBliWj
Wearable Carbon Monoxide Detector: amzn.to/3pYZW7c
DJI Mavic Air 2 Drone: amzn.to/3jZMyw0
Johnson Roof Level and Slope Gauge: amzn.to/3ByFQ60
Dewalt Driver Bit Set: amzn.to/2ZW3WL7
Extech Circuit Load Tester: amzn.to/3BEub5C
UEI Pocket Folding Thermometers: amzn.to/3BHlzeB
Rubber Drain Stoppers: amzn.to/2ZLXt4Y
Dupont Disposable Tyvek Suits: amzn.to/3mDNRST
Mechanix Disposable Gloves: amzn.to/3GKjYbO
Tub-O-Towels Wipes: amzn.to/3EGwvLg
Airthings Corentium Pro Radon Monitors: amzn.to/3GODggM
Amazon Tripods: amzn.to/3CEremU
Mold Air Sampling Kit: amzn.to/3CIZYne
Water Pressure Test Gauge: amzn.to/3jZmmBJ
Disposable Shoe Covers: amzn.to/3q0Ol7H
4ft Water Hose: amzn.to/3GLBADR
WORKPRO 20pc Socket and Ratchet Set: amzn.to/3GJhjPq
Racket Ball: amzn.to/3k2sJEd
Electrical Tape: amzn.to/3nVGztn
Needle Nose Plyers: amzn.to/3nOZcyZ
Apache Radon Monitor Carrying Case: www.harborfreight.com/3800-we...
Phone Mount: amzn.to/3ZT8eNN
First Aid Molle Bag: amzn.to/3IY2hsR
Portable Air Compressor: amzn.to/3IYmChs
Portable Battery Jump Starter/Charger: amzn.to/3wauaWS
As an Amazon Associate I earn from qualifying purchases.
wow, i built that 22 years ago, and it still looks good )
Yeah, like 22 minutes ago
All they seem to be missing is the large kiddie pool on the upper deck!😮
That top deck's lack of support is ridiculously-dangerous. All the outer load appears to rely on the shear strength of 6 wood screws.
No it's fine. The box said "wood screws" and I'm screwing into wood. No problem!
What a $1500 pos unbelievable, and I'd bet the homeowner paid $15k lots of scumbags out there pretending to be deck or construction companies taking advantage of older people etc.
The home owner probably loved it
Im just an overhead door/gate tech. Did the best I could.
Kidding of course, but love watching your channel. A part of the trades I never really get to see. Thanks.
This is crazy , I dont consider myself a deck builder but have built a few and are still standing strong after 20 + years in Michigan and I laugh now when my friends said I over engineered my builds.
So, this is like the 4th video I've seen of these and every single time I just look at the deck and wonder:
Do decks not need cross-bracing?
Surprised you stood under that.
You missed that the hangers weren’t nailed off. But yet you get what a lot of the GCs supply and pay for 😂😂
Always make sure that they are licensed and insured it will help if you need to go to court.
the slogan that made everyone DIY.. licensed and insured (in other words we charge 10x more for L&I ) for the same work as a handyman
@@magnumballistics If I need to hire someone to climb up to cut down one of my trees my insurance company wants the work crew to have insurance of their own.
I see these type of houses in many videos from the US, are the outer walls composite boards? It got the looks of a shed.
That is a ridiculously good camera
He had the courage to stand under it
@1:11: Structural screws would be fine. They don't need to be nails.
And those deck screws are better than what I just took apart.
1-1/4 roofing nails!!!! On a second level deck.
I mean for fuck sakes.
They were either cheap or DIY just didn't know what they were doing!
But eet bee okay! Ees how we build them in Mexico!
Had a ground level deck built some years ago. I insisted on 6 x 6 footings with lag bolts, and joists 12 inches apart. Inspector came and told me I overbuilt it. I asked him if it was a bad thing, and he laughed and said no. It has held up nicely these many years, and I did have the top boards entirely replaced, but I will NEVER own another wooden deck again. The maintenance is just not worth it. Concrete or pavers from here on in, if I ever have to do it. I did a lot of research before we built. Yep the old no flashing and ledger board bolts not staggered. I have seen this on friends elevated decks and I let them know it needs to be fixed. Excellent video.
Depends on elevation off grade
Zero sway bracing on a second story deck is criminal.
Not even lag or through bolt, wouldn’t you want to double/triple that outside rim or whatever you call it and have it sit on top of the post?
As someone who has built multi, level decks, I would not have even attached to the house. I would have built with 6x6 posts on 2x10 beams and 2x8 joists and tied everything together with the correct bolts screws nails brackets. Hanging all that weight on your building is just silly when you can just build a strong freestanding deck.
Asking out of ignorance and in preparation for a deck build: what's the matter with using screws (proper ones, that is) for the joist hangers?
Screws snap under a shear load while nails are flexible. A broken screw is much more useless than a bent nail for load bearing supports.
However you don't want your deck flooring to move when the wood shrinks/expands so that's when you would use screws.
@@HeeHeeMan11 Exactly, I learned that in a code class. Screws snap, Nails bend.
Simpson does sell joist hanger screws that are intended to be used with their hangers, but they’re spendy. Just go with the typical joist hanger nail and you’ll be fine
the Simpson strong tie company is likely the biggest racket in the construction field.
We’ve countless examples of gorgeous Victorian homes that never used them (some will be celebrating their 150th birthday soon), yet our modern McMansions fail daily riddled with the little ugly bastards.
Just use pressure blocks if you suck at toenailing/toescrewing…. Looks better than nailing a bunch of stupid looking recycled beer cans all over your nice new deck.
Use nails.
Needs some carriage bolts, otherwise its not terrible.
It’s just causing damage to the exterior wall of a house, the builder is clearly somewhat mathematically inclined and has a basic understanding of framing but it simply won’t last nearly as long as a deck built better than it. Waste of money really.
Building a deck is pretty much the one project that homeowners traditionally do. Badly.
Glad I'm not traditonal. Built my decks with 10" I beams 72" on center, with 3" diameter steel posts set in 10" diameter cement footings 18" deep. With 2x6 joists 16" on center, with trex decking.
Take it apart and call city inspector when the holes are dig
Oh lord when you zoom in. Yikes
You go cheap you pay twice
that twisted top rail on the left of the bottom deck honestly is what bugs me the most
So are you saying this won’t pass inspection? 🤣🤣
It will be fine wood is strong
It looks so weak and frail
Doesn't the city or county supposed to inspect?
You don't even lag your posts to the rim Mr inspector. You place the rim on top of the posts. Shear strength of fasteners isn't enough.
Your not gonna be able to get a 2x8 joist system in there and still have enough head clearance on the ground floor. My solution is 4x6 beam on the outer edge sitting on 4x6 posts then sister more 2x6 onto the exisiting joists. The only really scary part is that 2x6 on the end of the deck is carrying all that load of the deck joists.
The existing floor of the house is so low that building a deck at the same elevation or lower won’t work.
Typically you need to pour a Sonotobe footing 8” above grade to prevent post rot. Then a double 2x10 beam on top of the footings with 2x10 joists.
The upper deck looks like it was built by squirrels.
The whole thing is a dangerous hazard and needs to be removed.
😳
I get the deck isn’t built right. Just add a 2x4 one side of the post, and then a 2x6 on the other.
One of the new boards will support the outside rim downwards.
For the long span on 2x6 joists just double them up.
Add an extra rim board and an inside 2x6 in addition to the outer if you can picture what I mean.
Essentially turning the 4x4 to a 6x6 without really removing anything.
Supports on guardrail can be added.
And I get paid half to come fix thier sht. 😂
A homeowner job. Second video I watched, and this inspector is also a complete hack! He missed the biggest problem of all, and complained about "no sealant" which is not needed.
3rd world workers , 3rd world results
Yet another "home inspector " that does not know one end of a hammer from the other. Got lots of book learning but have never built anything except an Ikea book shelf.
In the defense of this industry, construction and construction code are not courses available in high school. In fact most things you should know, are not taught in high school. They are not taught in collage either because no one goes to collage to work hard labor.
But... in reality, if you don’t know how to build something atleast to safety standard, you just shouldn’t. Forget skill, precision, and attention to minor details, this deck could kill someone or cause severe, expensive damage to the home alone. Who ever built this clearly knows just enough to be dangerous, literally in this case. If you are gonna be out building things on this scale that require you don’t injure or kill a home owner, it is your responsibility to go seek the instruction or knowledge on how to do it properly, at the bare minimum.
Boo hoo! 😨😨😨
6'8" door proves that 4x4 is not over 8' as you claim...not saying it's right...just be correct..you don't need to sell us about poor building/ choices.
....... at 0:25 seconds into the video you can see the posts are 8 feet tall at minimum.
But, pause the video at ANY point where the entire framework is shown... and you can CLEARLY see the posts are ~6 inches ABOVE the door... and at minimum ~10 inches beneath the door.
You just failed inspections 101.
And then commented to cement the failure.
Stop saying ummmmmm to begin every sentence. SO annoying.
And it will probably be fine for 20 years.
well it could have been 30