2008 Skidoo MXZ 600RS Engine Removal
Vložit
- čas přidán 7. 02. 2020
- Removing the trashed engine in my sled. It's a relaxing, easy project to do. I missed the two-stroke simplicity.
-
Can you tell I haven't filmed a video in a while? I tried to cut the rambling but that's my default. Hah, let me know your thoughts in the comments!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@curtiswalshmedia on the socials - Auta a dopravní prostředky
leave plugs in to prevent anything from falling in there and plug all exhaust and intake ports just blue paper towel works awesome stops small particals from entering the motor.
Thank you so much to filming thins. Right now im doing the same.
Eemil Laukkanen I’m glad it’s helped you! Shoot me a message if you have questions. I’ll reply faster on insta. Same username.
At 0:45 Crank bearings that need to be manually greased ? I ve never seen that.
Getting plastics all off is a pain in the ass. No more lift the cowl on sleds anymore.
Geeze, even changing plugs are a pain in the ass on these newer machines.
2012 800 etec tnt.
At 10:16 there is a small 90 degree oil port for the water pump, what is the port that is slightly larger to the right (mag side)?
❤️❤️❤️
Hey I'm seeing that this video on that these comments are a little bit older but I'm wondering if anybody can help me out I took the top half of the motor out with the cylinders and I was trying to get some of the antifreeze out without draining it and it was using an air hose and it was my first time ever taking an engine apart so I didn't do my research very well. But I'm pretty sure I got antifreeze splashdown into the crank area at the bottom of the Rod's. Do I need to drain it or pull the motor out and get all the antifreeze out of the bottom end of the motor. I would assume so I've always heard that liquid in the motor is not good I'm not sure how much is in there
It looks like you deleted your oil injection
And that back plate is for a oil pump for oil injection
no oil injection when you mix gas for an rs
Yes I know I have 6 rs’s That plate is we’re you can add a oil pump if you want
Wait too fast for me to watch and get anything out of it
newfie????
Yes sir!
This is all shit that ive done b4 to a 2014 polaris indy 800sp junk polaris
Get into a skidoo yet? Lol. Not knocking polaris. They have some sick machines thesedays. Just seems no matter how new of a sled your into , you still have to do work on em. Always something after a weekend of ripping. Cheers
@@kyletracey5819 i got a ski-doo i dont want another polaris only cat ski-doo and the new guy the lynx unless yamaha looses a megaton of there weight ill get another 1 rn im on a 2006 ski-doo 600sdi and a 2014 sr viper rtx se 129x15x1.25 needs lots of work tho
@@kyletracey5819 tried a 2020 ski-doo 600 carb the engine feels so much smoother then my 600sdi the way the clutches engauge and the backshifting its knoticeable but i like the speed my rev has
Awh man you did a whole bunch of unnecessary steps you don’t need to remove tank or air box but to make life easier pull the jack shaft and jack shaft support.