How I DEVELOP film in my BATHROOM!
Vložit
- čas přidán 31. 05. 2024
- This is how I develop my film in my bathroom, in this video I take you through the entire process from what chemistry I use and how to actually develop the film. PLEASE understand I'm no expert and this process is just the easiest for me. Also don't be dumb and consume these chemicals. I WARNED YOU!!!!!
FILM DEVELOPING STUFF:
Developing tank - amzn.to/2PxMN10
Changing Bag - amzn.to/342uhTP
Kodak Indicator Stop Bath - amzn.to/38pp5Na
Kodak Photo flo - amzn.to/2YwAvKs
Kodak D76 - amzn.to/2LEaILj
Kodak Rapid Fixer - amzn.to/2YCvMHs
Syringes - amzn.to/38k3TrT
Measuring cups - amzn.to/2E3IaXi
Funnels - amzn.to/2sVeRDY
MUSIC, FREE 30 DAY TRIAL - www.epidemicsound.com/creator...
Instagram giveaway at 20k! - @Kingjvpes
-----------------------------------------------------------------------
AMAZON DEALS:
Portra 160 - amzn.to/2mxueQg
Go Pro Hero 7 Black - amzn.to/2o45dg2
10x Kodak Ultramax - amzn.to/2LpElCf
10x Fujicolor 100 - amzn.to/2Jj6FUf
Unicolor c-41 kit - amzn.to/2Iipl4B
My Camera - amzn.to/2Mqx5qs
(Amazon affiliate links - Any purchase made through these links will give me a small amount)
Brevite Backpack - www.brevite.co/?rfsn=1079380.a...
(DISCLAIMER: This is an affiliate link, each purchase through this link will give me a commission.)
-----------------------------------------------------------
FOLLOW Me on instagram!
Instagram : @Kingjvpes
Twitter: @Kingjvpes
Filming Equipment used:
Sony A7II
Manfrotto tripod
Go Pro hero 7
How to buy film camera. First time buying 35mm film, how to buy cheap cameras, 35mm Film buying guide, Film,story,first time,shooting,35mm film,develop,film is not dead, minolta,short film,vintage,darkroom,fujifilm,cannon,x-700,htsi plus,how to shoot film, kingjvpes, minolta SRt101, portra 400, Berkeley, Cal, Norcal.San Francisco, golden gate bridge, point reyes, 28mm, olympus XA, Canon autoboy, canon af35m, expired film, cheap film, best cheap film, how to shoot a film camera with a broken light meter, broken light meter, broken meter, how to light meter, agfa vista 400, tomography color 100, canon eos 3, 85mm 1.8, film camera giveaway, best films, best 35mm film, top 5 35mm film, $3 film camera, $3 Leica, Cheap leica, Free Leica, Leica, yashica mat, yashica 124, yashica mat 124, expired tri-x, Nikon f3, Canon A-1, Minolta x-700, Seattle, black and white, money, sharp, groot, street, how to develop color film, how develop black and white film, street photography tips, how to street photography, how to take photos, beginner film photography, film photography for beginners, tips for film photography, how to film photography, beginner film photography tips, free film camera, how to thrift, make money photography, thrift adventures, thrift store shopping, landscape photography on film, cheap film camera, expensive film camera, lomography, cheap vs expensive, nikon f3 vs, film haul, film camera haul, film making, how to take product shots, product shots, photography workshop, street photography workshop, how to improve photography, why you're photography is not improving, motivational, Street Photography inspiration, Leica rangefinder, creative filters, creative filter portrait, nikon 35ti, compact film camera, Photo books, Street photobooks, street photography photo books, overcome creative ruts. - Jak na to + styl
*I think we should start every video with a guitar chords*
Me:yeah he is Filipino
What camera is on your profile picture? It's pretty.
Your GF be like:
Babe I need to use the bathroom!
Then you be like:
Hold up I need to develop some film! 😂
Andres Diaz the truth!!!!
Man! I’ve seen many youtubers teaching this, but you’ve been the most helpful!
Im trying this on Tuesday, wish me luck
God bless this man , I learned so much from his channel. I developed at home for the first time a couple weeks ago from his last developing video
So happy you’re spreading this film knowledge bro, i feel like sometimes this stuff can be inaccessible to young photographers trying to get into it.
Don’t forget to HypoCheck that fixer every once and a while. Even the indicator fixers sometimes go bad before the color actually changes.
Couple of comments on this video if being used as a learning tool. No matter how good your technique, it is practically impossible to get an even tone development where development time is less than 5 minutes. Short development times also make it difficult to get repeatable results. You may not see the effect unless you have larger image areas of even tone, such as blue sky, but it's a real burn when you do. Washing: Flushing tap water into the top of a tank may or may not effectively flush the water over the surface of the film coiled up on the submerged reel. Often, the fresh water just runs off the surface of the tank and yields little effective film washing. Finally, wash temperature. Washing under a tap still requires some attention to water temperature. The efficiency of film washing is reduced as the wash water gets colder. The wash time requirement stated by film and chemistry makers assumes the wash water to be at least 68 deg F. Once wash water get below 60 deg F, the ability of the water to flush fixer out of the film emulsion is greatly reduced.
I've done well with 7 minutes on developer.
@randallstewart175 so I do have a question: do you invert or stir with your developer? I've heard arguments for both and just am "polling the audience"
that demo prior to the dark bag was so helpful! definitely going back to this video once I decide to start developing my own film! thanks!
This video reminded me how I used to develop films in culture center, where I learned b&w photography. And now I wanna do comeback to film photography after nearly a decade. You really inspired me to try once more films and maybe later developing them
I’ve been waiting for an in-depth video like this for a long time. I put some equipment on my Xmas list and I’m hoping I get some. Would love to start developing film.
What a wonderful presentation! I hope you make a part 2 video presentation showing the next phase of going from the raw negatives to creating a print to be framed.
Hey, thank you so much for your sharing on CZcams. I've benefited a lot about film shooting through your channel. Bravo man!
Keep up the helpful work and generating the group!
Dude, excellent video. Hands down. This reminds me of a rubix cube. When you think " I will never be able to figure this out... its too complicated" and you invest your time learning it, someone out there will give you the wisdom in a simple process to succeed. Awesome video hands down and this is making me a little itchy to get my AX-3 out and try my hand at classical shooting.
Hey, what a wonderful video. Keep up the superb work! I look forward to your next video.
Love the step by step process! I cant wait to try it out !
Great video man! Thanks for making this so easy to follow
How cool mate. Such a great advices and lil hints. Cheers bro ✌🏽
I used to leave a tab out of the canister so i can load another roll in. I would buy 100 foot rolls of film and reload the canisters. Really good video. There was always something about developing film i enjoyed. The excitement of seeing the images for the first time. That's the magic thats missing with digital
Just discovered your channel when looking to buy another vintage camera, absolutely love your content!
Your videos are great 👍 and you are awesome 🤗 keep the great work and I'll keep following!!!!
Great video! I put my film stuff away some 15 years ago and recently got the "itch", so here I am getting my head back I to the game. Thanks for this! :)
A suggestion for you when making your solutions. Add your concentrations to your water as opposed to the other way. I've added too much water to mine. Ugh. For those that mix powder with water, don't go part way. Mix the gallon and use dark bottles. Never put used solutions back into the same gallon jug. Put it into a second jug so you don't contaminate fresh(er) solution with old. I used to use labels and date and mark the number of uses. Also, use dedicated funnels for each solution. They're cheap!
HC110 Dilution B is better ... way better actually. 2.5 minutes is way too fast for solid results. Also water as a stop is 100% fine my school darkroom did it that way and I've been doing it that way ever since and it works and from an archival perspective the negatives are holding up fine. Also you never said a word about the temps of your chemistry which are important to your development time. Actually it is really important. Black and white film can be developed in a wide range of temps but you have to adjust the dev time to match the temp I don't even see a thermometer in your kit. You left a lot of important steps out here man!
It’s given that your bathroom is between 68-75 *F. It shouldn’t damage the chemicals.
@@markm0000 huh? how is your comment relevant? Who said anything about damage to the chemicals? I sure didn’t.
@@markm0000 The temperature of the chemistry should be higher. You don’t develop in room temp, or at least you *shouldn’t* dev in room temp.
This process makes you give even more value to each shot.
Been watching a whole bunch of photo developing videos as I am getting back into doing film (I've developed film before, albeit almost 20 years ago back in year 9). Mostly just to reassure myself that as long as I follow the directions, I probably wont mess it up.
ASTIG! THANKS KINGJVPES! LOVE THE CONTENT!!
Dude thanks for making this video! I'm currently using some Cinestill df96 to develop my B&W. I got it just to dip my toes into developing at home. But I want to move to a proper developer and fixer now. This video was perfect.
Thank you so much!! I’ve really wanted to develop my own film just haven’t had the opportunity to get everything together for it. This video will really help for when I gather everything together!
Amazing video! Love how you really put your time and effort to create the best images! Keep it up! Also you should check out this camera called Kodak M35. It's getting quite popular nowadays
I would love to see you do a book of your work like some fire that we haven’t seen but if it’s a plan of your.
Great video, I have been developing my own black and white for about a year now and must say that a film leader retrieval tool is a highly recommended tool. I will pick out the film leaders, cut them and get the film started on the reel before it even goes in the dark bag. Saves a lot of time and effort also it saves the cannisters which I then use for bulk rolling film.
Hopefully more people will be encouraged to try developing at home after seeing your video, it's so easy and a lot of fun. I plan to start home developing colour in the new year.
If you find long scratches in your film, then there might be grit/grime on the canister's felt. That is the only risk I see with your technique. It is a good idea. Just be aware that this will be the 3rd time the film passes between the felt opening of the canister. If you have fairly clean habits, the felt will probably be clean.
You’re so sooooo helpful. Thank you 😍
I would like to try developing my film! Thanks for this!
this is awesome thank you for sharing!
I’ve been using HC-110 (E) for years. 5ml for 240ml for steel reels. 9 mins, agitate 10 sec/minute.
Film development is basically the same as old world alchemy, everyone has a variation to the process. I’m not a fan of quick, under 6 minute development. 9-10 minutes feels right cause I learned on D-76.
Photographers have been yelling at each other over agitation schedules and techniques since forever. Ultimately, just do what ever you find repeatable and consistent.
I will say for HP5+ at the wash step just pour water back and forth from the tank, pouring out the water when it’s significantly discolored. The agitation helps here a lot, and it’s the only way I saw to remove that pink/purple from the negative.
thank you for the info
Nice info my dude! I plan to develop in the near future and I'll have to do it like this bc I dont have a darkroom...yet. 😊✌🏾🚀
i came here cause i haven't developed film in a while and needed a little reminder. this video is perfect except for that one thing i remember well and its that you should NOT throw these chemicals down the drain (as you did with the developer)! you should keep all your wasted chemicals in a separate tank and bring them to your local photo store as they should have the equipment to safely dispose of these.
film picker also a live safer for me because i can pick out the film lead outside the darkroom or changing bag and cut it before i load it into development tank in changing bag. i can use that undeveloped tip of film to test my developer and fixer before i start the developing process. it can be done under the normal light. first thing just take a little sample of the developer and fixer, put it in different little tray and put that undeveloped film tip into each tray, shake it little bit like developing a print. if the developer working well the film will change to black and if the fixer working well the film will become transparent. if everything going well i can start the developing process without worrying about the power of my chemicals
Omg, yay, you started developing!!!!!
Thank you. This is helpful. Do you have a video for the color film development?
Nice! I have some kindermann tanks, but I think I'm going to get one or two Peterson's and one of them lab syringes. Nice. Thanks.
If you live in an area with hard water, it's also useful to add Washaid (or similar) in the development process after the fixer, in stead of just rinsing it in water. Here in Norway, the tap water is fine. But I lived in Denmark for a while, and the water there caused major streaks on my negs if I didn't use the Ilford Washaid. Kodak has a similar product called Hypo Clearing Agent.
Hard water is not likely to have much effect on the efficiency of film washing. In fact, the earliest "washing aid" is just sodium sulfite, a salt solution. However, hard water contains dissolved calcium, which can leave streaks on the film as it dries. The remedy: After normal washing, make a final step of distilled water and Photoflo or Ilford equivalent, mixed to a dilution about half the Kodak recommended concentration, and soak your film for a minute or two with some agitation. Then, pull the film and hang to dry without wiping or squeegee. Guaranteed no spots or streaks.
Great video! One word of advice, though it doesn't apply to you: if you're wearing a FitBit or something similar, take it off. On mine, the display lights up occasionally, as does the green laser on the back. I could see that fogging your film inside the bag.
i just use tap water as a stop bath with hc110, no issues up until now
awesome video, what camera and film were the end images shot on? I love sharpness of the b&w
Wow, this is cool! I always enjoy different development techniques and your video was really fun to watch! Have you tried developing with coffee, I love the results of that too!
Nural Idrisoglu never tried coffee! Haha I’ll have to give it a shot
KingJvpes I would love to see your comments on that too!
NEW VIDEO? BIG HYPE!!
I use Ilford chemicals and have no issue with them. Stop, Fix, Permawash/Hypoclear, and Photo-Flo doesn't really matter with brands. Developer DOES matter. Different developers have different characteristics, and even with the same developer, the dilution can influence the outcome. Most famously, Rodinal can be diluted to 1/25-1/100, the weaker the dilution the finer the grain, but developing time also increases.
fantastic job with filming and explanation. A great way for people to comfortably dip their toes in the water of bw developing at home.
Your handling of the tank with agitation is one of the best I've seen on CZcams. Looks a perfect balance between gentle and aggressive. Just Right!
HC110 is great and you can do a serious ASA booster using HC110 Developer Replenisher. These days I use Diaphine so that I don't have to worry about time and temperature with any B&W film. The scan the film on an Epson V600 Photo.
Liked that Cmaj 9th (I think) chord at the beginning 👍👍
DM7
Do you get the Ilford chemicals in the US? I just started developing at home with them and they made my Kentmere rolls turn out great :)
That was pretty interesting
Awesome video, just started shooting film and your Chanel its been really helpful and easy to understand. BTW how do you scan? Do you a video for that as well? Thanks for this video
Depends on the quality you want, flatbed scanners are the easiest and least expensive but drum scanners, or dslr scanning etc are options depending on how much time and money you have and the quality you want.
Graham White thanks for the feedback
Is it the same using the dip stick to agitate and using circulation to agitate?
Try pulling your film to 320 and developing dilution 1+47 for 7:30 mins. Exposing for the shadows developing for the highlights gives you a really nice curve, shadow detail, highlight detail a really even negative excellent for darkroom prints! Now with this craziness kodak is doing with these "new formulas" with hc-110 and d76 it's like starting over again. The new hc-110 is a lot stronger than this one you have, same as the d76. I hate them, but im getting there. (Trial n error)
Thanks. I’m new to film and this was very helpful. Question pls. I’m using HC110 to develop Delta 400 How do I find my instructions. Do you recommend any apps? Joey from San Mateo
I’v used a stop bath but most of time I just use a water stop. Never had any problems with just water. Different developers give you different results. More or less contrast. Finer grain etc. use the developer for a desired result.
Love the vids. Couple of suggestions: 1. Photographers' Formulary TF-4 Fixer. This stuff doesn't require a stop bath or a wash aid. A $15 bottle will get you 80 rolls' worth. Works on prints, as well. B&H has it. 2. Instead of using all that water for the wash, try the Ilford Method. Same amount of time, but far less water used. And what about dust? I get dust. Do you get dust? Even with Photoflo and distilled water--dust, dust, dust. I even run the shower on hot for a few minutes to pull it all out of the bathroom. Still . . . dust. I gotta build a drying cabinet. 3. Stop bath vs. water. I have read tons of threads on this, and the consensus (on APUG/Photrio, that is, which is what I trust most) is water is best, filmwise. (Prints, different story.)
i cant get rid of dust, thats my enemy, but few specs here and there, doesnt bother me anymore. Film isnt meant to be perfect and spotless like digital, so its ok.
Guys remember, developer is an exact time, but you can leave your stop bath or fixer in longer, just not shorter than the time needed to stop and fix.
Sometimes and if you're not precise with dilution and temperatures, prolonged time in the the stop bath can produce pin holes in your emulsion. Better to make sure the stop is fresh enough and use hypo-check to determine the integrity of the fixer. Then you can use standard times. And how come no one has mentioned using hypo clearing agent to remove unwanted hypo from the film? Cuts wash time, too.
PLEASE HELP: I have some old Film and I don't know if it has been used or not, it is fully like the colour before you developed the Film before you could see the images on them / negatives / but how do I know if the film has been used or if it hasn't... is the film when its been used the same colour as it would be when it wouldn't have been used?
Thank you
Hi Jvpes, I just starting to develop and I would like to confirm for my very first development if I have to use 250ml of dilution i a 500ml paterson tank with just 1 roll? Thanks in advance.
Thinking about home developing myself , I’ve read water temperature is important, I didn’t see you testing temperature, do I have this wrong or is it in a different method ?
Hi nice teaching of producing film development. Question how does it cost for the whole development kit including the chemicals..? What's the cost of saving compared to taking it to developers.. thanks keep doing what you're doing..
Hou do it withour a respirator and without a vent (directed to outdoors). Do you know that these types of chemicals (photo chemicals of all types D76, C41, ECN2) is badly toxic?
whats your thoughts on monobath chemicals im looking to get back into film photography and waant to keep it simple
Does temperature of the chemicals only matter with color negatives?
Any future video's on making prints or how to scan negatives? Nice video still..
Can I reuse the developer? Which chemicals should I be keeping and which should I be disposing of
Can I use photo flo with color negatives?
King J. Nice video; however, I suggest that your viewers buy a thermometer and soup the film at 68° F. All the baths should be at this temp. A way to do that is to put the vessels containing the baths in a small tub (i.e. a dish washing tub) of water that is 68°F. This will prevent reticulation and standardize bath times. Also if you use a changing bag don't forget to put in the tank and its lid. Nothing worse than that. Finally, before you use your fingers to swipe the film make sure there is no grit on your fingers and dip them in Photo Flo solution, too. Oh, and if you hang your film in the bthrm, turn on the hot water in the shower a minute or two before you hang the film. This will put steam into the air and capture some if not all of the dust from floating around and settling on your film.
Do you not measure temperatures at all?
Don't you use some sort of bottle opener to open the top of the canister?
Do you have a video of your scanning process?
I just did my first roll. LOL. in my bathroom.
I think its funny to tell people that. Oftentimes when you tell someone you're a photographer, they'll say "yeah, when I was younger I use to do that and use the darkroom at school."
Then I respond: I develop my film in my bathroom.
the looks are pretty funny.
By any chance, do you know how to be sure that your color film has been properly developed ? On some color plus 200, the color looks pretty brownish and I don’t know if it’s because of the film, the exposure, the camera or the developing process...
Woah cool vid bro, though I'm not a photographer, still love your vids, it's so cool😍
Btw I'm the friend of Kurt, hehehe
can photo-flow be used with c-41?
PhotoFlo is like the name brand stuff. Search for "wetting agents" And it's the same stuff. It is amazing and always develop your film with that stuff
i always use liquid soap as a substitute for photo flo and it's working well too. also liquid soap are more cheaper than kodak photo flo
I use PhotoFlo wetting agent always as well.
I find the working solution will develop floating stringy particles over time, so I always make a fresh batch with distilled water when developing film. (and always with a clean container that has no dust in it)
When done for the day, I toss the solution.
Hi bud like your work how can I start working on my own development process where I can learn from scratch ?
Hello just wondering why you did not use hypoclear?
Could you recommend products for colors?
I really want to get into shooting film but what’s the first camera I should get? I live in the uk so I don’t know of any labs for developing photos, help!
Quick question, every 30 seconds means 30 seconds put it down for 30 seconds then start agitation again?
And for those with regular finger strength.. an old beer bottle opener will remove the cap off the film container.
How do you dilute the solutions?
how did you get the actual photo from the film?
So I'm a little late to comment but I hope I still get a reply. First off man I love your videos your the number CZcamsr to get me really into film. Now me and my fiance go on frequent trips to antique shops and good wills hunting for some killer deals. Now I've never developed my own b&w film and am really nervous. Is it easier to just do a roll and step out or get someone to show you?
Quite interesting
How long does this process normally take from start to finish?
What size photo prints do you use?
Great videos! I have a question it might sound stupid but what if I have some night vision goggles could I use those to load the film in the dark or do you think the infrared light will affect the outcome of the development?
I need to know this too
Bruh, I been sleeping on Photoflo. Thanks for the vid and thanks for wearing disposable gloves.
I get boxes of gloves cheap at harbor freight.
Whats your opinion of Ilford XP2 ?
Ayyy another video!! #MinoltaGang
#TeamBathroomDev here we are !
you can stop the developer by just adding water to the tank and ''wash'' the film ?
Are the chems not mixing with "left-overs" when you pore them back to their prospective bottle? Thanks!
satlaone Your right👍 They do and by time the results of the developments change. The chemicals are oxidized every time you pour the liquid out of and into the bottle Period
Where did you buy these chemicals amigo?
Can you make more point and shoot film videos?