The Worst Guitar I Ever Played is Almost Genius
Vložit
- čas přidán 6. 07. 2024
- The Strandberg Experiment Episode 6 features the Grote Headless 6 Strings Electric Guitar GRHL-2.
My Only Guitar Course: oneguitarcourse.com
All My Stuff: linktr.ee/andrefludd
FREE Guitar Craft Newsletter: www.andrefludd.com/newsletter
Patreon for more guitar stuff: / andrefludd
Podcast: open.spotify.com/show/6pZwdWh...
Favorite Gear
GUITAR CHAIR & discount: www.hinomi.co/andre
Ergonomic tool: sweetwater.sjv.io/VmWY7A
Favorite guitar under $500: sweetwater.sjv.io/zNkboe
Favorite all-around amp: sweetwater.sjv.io/jrgyYe
Favorite strings: sweetwater.sjv.io/eKGEYr
Favorite Gear (Europe): thmn.to/thocf/ad464wb96y
0:00 intro
0:40 Phase 1: GREAT!
5:15 Phase 2: Good!
9:00 The Bad Begins
11:30 Phase 3: The Sound
14:13 Conclusion - Hudba
Updates:
1) guys, I know you can use a right angle jack. That’s not really the point, it’s still uncomfortable, and a design flaw.
2) I figured out how to adjust the string height. The adjustment was jammed so it took a bit more force and patience. I’d still change the bridge for the other reasons mentioned.
3) Yes I know hex drill bits exist. I didn’t have one handy so I did the drill thing as a bit of a joke. No I wouldn’t do this on a guitar I cared about…
Just a PSA: search for "eart bridge adjustment" on YT, and the first result is a video by six1nine that goes into all the adjustments in detail, including string height. I just picked up an even cheaper Leo Jaymez headless on Amazon with the same bridge, and apparently the same crappy pickups. For me, the bridge is fine -- I just wanted an inexpensive practice guitar for air travel, not for live gigs. I'll be swapping out the electronics of course, but it's still the best option in the price range.
I did some quick searching on Reverb and there are several listings for a headless guitar bridge made by "Nova" that look decent in the pics for $209 and there was one listing from a Myles Music Shop in Wei Fang Shi, China for an unbranded bridge for only $90.20 (but I bet its no better than what you have). So that seems a lot better than spending $400+ on a Hipshot bridge (although on Reverb there were several Hipshot tremelo bridges for around $300). By the way they have a listing for the bridge already on your guitar for $53 ... so that's rather telling :)
Just keep the Sunk Cost Fallacy in mind if you decide you want to try to "fix" this guitar.
Good review. I found on that type of bridge, the height adjustment cam will get stuck which I was able to fix by reducing the string tension and tapping on the string roller.
Ok, I ran the numbers. Assuming you're already into the guitar for like $300 you'll have 209 for the Nova bridge (and this assumes the head piece will work with that neck and you don't have to hunt something else down). Plus ~ 270 for a pair of decent humbuckers (I looked on Dylan McKerchie's site and he'll sell you a matched pair of his humbuckers for that ... frankly that sounds like an awesome deal for hand made pickups, and I bet if you called him he could tell you exactly which of his pickups you needed to achieve your tone goals) and I threw in a $61 for a Stewmac wiring kit (because I bet the pots, switch and jack in that thing are crap). So that would be $840ish total (not counting shipping on all this stuff). After all that you'd have a slightly nicer playing guitar worth about $300. So yeah, you're running up against Sunk Cost Fallacy for sure. That said, still a lot cheaper than a Strandberg.
If it was me, I'd just make sure the action and intonation was adjusted as good as you can get them, then adjust the pickups up as close to the strings as you can get them without them getting in the way ... and then hunt down some kid in the neighborhood that needs a guitar and give it to them :p
@@Zundfolge I'll take a set of Seymour Duncan's that'll sound exactly the same for half the price... lol.
I think you might be the only CZcamsr who actually talks about the physical part of playing a guitar - how you sit, how it’s feels with the fingers, and so on. I appreciate the detail!
All the others are just theory CZcamsrs who play guitar
The only other one I can think of who speaks about it occasionally is McKnight...
Tim Pierce talks about often
Awsome looking guitar! String height, after market parts and pickups are a big deal for me. Neck feel also. Bought an Eart "Strat" style guitar from Amazon. $250. I do like it. I also have 2 PRS's. I like them all. Need more + others.
Wait - you mean a review that consists of reading of the spec sheet and then five minutes of jamming into a tonne of effects and a £2k amp isn't useful?
Here's how to find the adjustment wrench or any lost ball bearings or screws:
Walk around the area in the dark barefoot.
You should then be able to remove the lost part from the now-bleeding underside of your foot.
Us dads do indeed play slow-ass blues licks but we also know how to find pretty much anything.
yes, especially lego blocks!
If it's iron or steel you can tape a super strong neodymium magnet to the end of a stick and wave it around! Probably won't find what you're looking for but you'll find a bunch of other useless metal junk
you could just ask your mom to find it for you and it will just materialize in her hand. she'll probably say "it's right in front of you how did you not see it?"
@nicolas reveco many of us watching have families and don't live with mommy anymore. Goodluck@nicholas reveco, hope you grow up to be a great guitar player. Wish you the best in whatever you decide for your future.
Pro-tip: First make sure you are up to date on your tetanus shots.
Solution to problem 1 with the tuners being too hard to turn by hand: there are philips head screws inside the tuners. If you loosen them a little the tuners move very easily. I have used that same bridge for my own guitar builds and it works perfectly. The string height is adjusted with two grubscrews, one for setting the height, the other for locking it in place. Sometimes if you adjust string height when its under tension, it can get stuck, but pushing it with your finger a little solves it for me at least. I got the feeling that you just went full monkey on this bridge and started turning random screws when I could figure it out in 5 minutes.
Thats right! Grote is a good instrument!
I have the Eart GW2 Non-pro which has this bridge. and I found that it wasn't great to loosen the screws in the tuners beyond a certain point. They got too loose and there was too much play in the tuner. My solution was to use my pick in the little notches in the tuners to turn them in a pinch. However I've found over time that the tuners seem to have lubricated themselves and are far less stiff than from the factory. So I no longer have much issue turning them with my fingers though I'll still use the tool for string changes and my pick if I happen to already be holding it.
The thing that is infuriating about the little magnetic tool is that you pull it out by the hex end not the handle end. If it came out and you didn't have to flip it in your hands it would be easier to use and not drop.
That pickup volume is hilarious, did not expect how low it would be!
Excellent video - I enjoy your presentation style as much as I enjoy the insightful content.
Hi Andre I know how to adjust string height on this guitar....there are 2 screws immediately at the back of each saddle....if you loosen the screw on the right side of the saddle by turning it counter- clockwise it unlocks the saddle.......then theres another screw immediatley to the leff of that screw....turning that screw clockwise or counter clockwise will raise or lower the action. After adjusting the action, just turn the screw on the right side of the saddle clockwise to tighten it back up again to lock the saddle in place. try it and you will see what i mean
Most articulate reviewer I’ve seen on CZcams. Would Love to see some NK headless form ali express reviews too
I used to have a Steinberger guitar back in the 1990’s. It was all black with EMG pickups, a super Strat shape body. It was amazing and well ahead of its time. It took strings with a ball at each end so you just slotted in and tuned. The trem could be locked in different tunings and it stayed in perfect tune all the time. The neck was made of graphite and super smooth. If only they still made them as second hand they are very expensive now. One i regret letting go. They had nailed all the design features of a headless guitar decades before companies like Strandberg came along. I have a Strandberg 7 string with Fishman Fluence pickups and I love it. 😊.
I am so happy you did this full review. Thank you.
You have quickly become one of my favorite guitar youtubers and i look forward to your videos. Keep it up!
I recently bought an eart headless but the non pro version (since it has this specific string system not the locking version) I hope that wasn't a mistake but im pretty hands-on on my guitars. Will find out monday.
I got the Valgoa. The pickups needed to be unscrewed and rescrewed to sit properly and I had to file down a few high frets. But it was great after that. There are two tiny set screws on each saddle. Left one is the lock screw and the right is the adjuster. Thing is, you need to physically push the adjustment wheel the string sits on to get it to go down. The set screw brings it up to where you like it. The lock screw on the left locks it in place. Also, it seems like you need to set the pickups properly. Mine is VERY LOUD and crispy after I set it up right. It's very odd. These guitars are very good for the money but only if you possess the skills to fix the flaws. Lucky I'm a Gretsch guy. I can name that buzz in five strums lol.
fantastic review! thank you very much
I didn't know there was someone even more into the nerdy guitar stuff than me. Super helpful reviews and music content. It's great that you as a presenter are very well versed so the content is super easy to digest. Great teacher. Thank you for your confident and humble presentation.
Thank you :)
So thorough. I'm loving your videos.
Thank you :)
i love how you organize your thoughts
I discovered your channel through your Mayones Duvell videos. I seriously respect the way you make these reviews where you go into every minute detail instead of just the usual bullet points of a guitar most focus on. It's also interesting to see a non metal player's perspective on these guitars.
I just discovered your channel, it’s awesome, thank you!
I look forward to your videos. They do look comfy to play on the lap.
Yep the aftermarket parts availabilty is a nightmare, especially tremolos. You could say strandberg was a witty guy to only supply those bridges with the guitar and not separately.
Imgine tuning a trem bulpup at the trem... won't work if the trem isn't so stiff tht it won't be nice o play.
This is really good to see - thanks! I'm a guitar builder in Tokyo and have a few headless bridges waiting around for me to try out. Most are in the separate tuner style like Strandberg, allowing for things like fanned frets, but I also wound up with what must be, I think, this exact bridge. I've not made an instrument for it yet, but had been planning to do so. However, I am now concerned about the problems you mention. Maybe I'll knock up an experimental design one of these days, but it'll be down the track a bit.
I’d love to try your work in the future :)
@@andrefludd Maybe we can make it happen one of these years. At the moment, I'm making an arch top for the amazing Hawe Gondwe (Amy Winehouse, Roachford). Happy days!
I have that same bridge on my Eart headless. Each saddle has 2 corresponding screws. One of the screws locks the saddle height, and the other adjusts the height. It's not like a Strat where each screw adjusts the height on one side. I agree about the tuning being a bit annoying if you're in a pinch, but in my experience, once you get it in tune, it's pretty stable. And you can make small adjustments with a pick.
Love the experiment!
Shame that it has those issues with the tuning and input jack, the restringing process is actually quite streamlined! One thing I don't understand is why more guitars don't put the input jack on the front of the guitar like a strat (or SG with if you use a 90º cable). It's out of the way completely!
when you reached for the cable.. I had to lol. I just did not expect that. Hopefully they address that, it's a simple enough fix in the design.
For your headless string poking issue. Had it also. Cut them a little longer and with needle nose pliers bend the ends towards the back. Easy peasy.
So I currently have 5 headless guitars, two of which use that bridge system and three using the typical longitudinal tuners. Frankly I prefer the system that is in your guitar, but I sense you approached it somewhat as a Luddite. I had no problem setting the string height or figuring out what everything does. Yes you have to adjust your attitude a bit, but you can even accommodate palm muting, and as for the fine tuning, if you don’t like the key (which again I don’t mind) then just carry a suitably sized Allen key. I agree the jack socket is stupid though, but my two, which are the NK brand, have a cleverly angled jack that sits neatly out of the way.I have swapped out the pickups in mine and they sound great. My NKs have quilted maple necks which are lovely. Thomann now do their own affordable headless, the Dulahan, but I don’t like the aesthetic, although it isn’t a bad place to start if you want a standard headless bridge. With all these cheaper guitars, you need to expect a bit of setup work and tinkering, but I must say I love mine and have not spent the earth in the process.
How do you raise the saddle height? Seeing others not able to adjust it and would be great if someone could offer the answer as to how it’s done
The only actual problem here is the string height on the bridge tbh. The pickups sound like there some electronics issue tbh. You just swap the electronics and the pickups anyway in cheap guitars.
I'm curious about what your stand of flying V guitars is: I know most people think they're basically "Stand up only" guitars but even though your legs might not be as comfortable as this shape, the V should easily rest in your right leg and while your position will be shifted to the left a bit, I wonder how big of an adjustment would be for you in term sof ergonomics.
It hangs on a strap exactly the same standing up or sitting down,just shift your legs over and a chair without armrests
I'm surprised you only have 11k suscriber. Great quality video and content ! thanks
Thank you for your insights, great review.
I've got a collection of headless parts for experimental builds, and I bought an Amazon headless for travel as well... but it doesn't have that bridge, it has the cylinders with the knurled barrel tuners at the tail end. They require the ball end down there, and then the strings locked and cut off at the headpiece. I agree with you about rather having the ball ends at the end of the headstock and got an ABM headpiece with little sockets at the end of the headpiece slots for the ball ends, and then each slot nestles a hex screw to firmly secure the strings. On the bridge end, I intend to use a more traditional bridge (or maybe one of the Babicz full contacts that I have) and then use locking tuners as a tailpiece. I'm gaining some space between by using Hipshot knurled buttons instead of more traditional buttons. Currently have some of those on a Superstrat and I love the fact that the knurled buttons are less likely to get bumped out of tune in the gigbag or when I'm clipping a capo between songs. I'll report back after building of the headless resumes. ☮❤🎶
Good points. Good to know.
My NK has the same bridge. If I remember one of those tiny allen screws is the retainer and screws down onto the rotating pivot point. You loosen it and then turn the other to adjust the tilt up or down for string height .. Just be glad your bridge was in the proper location so you could adjust yours .. One saddle on mine needs to go either forward or backward more and is slid to its max and can not get a perfect intonation .
Were the frets ok?, fret ends? Level? Buzzing? Thanks 👍
love your videos. since you’re doing all these headless experiments you should check out the Ibanez Quest and the GOC Guitars line up.
I discuss this in episode 2
Thank you. I have been wanting to try one of these, and THAT - the input jack, is a deal breaker.
Great detailed video, well done, thanks.
There are indeed some brilliant innovations here in this guitar, which, surprisingly are not always present in more high-end instruments.
Finally, finally, a solution to get rid of sharp string ends at the end of the neck.
I don't know why some people leave them there sticking out for a few cm or even inches, but whenever I see bunch of sharp string 'tails' on the headless guitar, it's just uncomfortable. The player will either harm himself or poke someone in the eye with those sharp strings. Not to mention that some player don't even trim string ends at all and play live (when at any time they can just lose an eye). So this seems huge.
Also I don't know why people do love those buckeye burl tops - to my eyes it looks either ugly or even cancer-like sometimes (but not 'healthy' - that's for sure).
P.S. that focused and disappointed face at 13:52 reminded me character Tyreese from Walking Dead show 😀
hahahahah dannnnnnnnnng, nice video! and wow.. thats crazy how low volume those pickups are sending haha
Grote Headless vs. Eart GW2. The location of the input jack is almost the main reason why I chose Eart. Thanks for the review.
I bought the same guitar and had a similar issue with the low volume. What i found was the tone pot legs were shorting out against the side of the cavity which was painted with shielding paint. A simple loosening of the tone pot and turning it a bit solved the issue. The pickups were actually 13k in the bridge position and 9k in the neck position. It was a simple fix.
How do these headless guitars compare to your DAngelico behind you since you really loved that one. As someone looking to get a new guitar which one would you recomend? (I only own a strat )
It really depends on what you are going for in a guitar. Go to a store. Annoy the people there for 2 hours and then leave with what speaks to you!
im so hooked on these videos...
Fabulous review. Glad I found this channel, that was the best guitar review I think i've ever seen.
Funny how youtube works, this is probably one of the worst reviews I've ever done haha. So it's all uphill from here as you check out the other videos :). Thanks for supporting.
@@andrefludd dude, if that's your worst, Imma definitely coming back for more...Love your vibe man!
Bro you are doing amazing work with these videos. You’re giving too true information on guitars for those thinking about buying them and I’m here for it man
Thank you Dr Fludd for these in depth guitar reviews! Don't change your style you beautiful human!!
Thanks :)
2:38 you had me at “stainless steel frets”. 😎🎸
Returning to leave a point on ergonomic design: the horn end of the strap should attach to the rear side of the horn, rather than the tip! SO much more comfortable as the strap ends up resting flat over your left shoulder instead of digging into the side of your neck. I found this feature on one of those old Cort electrics with the pentagram inlays and it was the most comfortable I've ever been while playing. Seriously, try one like this if you haven't!
I have some guitars like that - problem is if not done right, the instrument “tips forward” if you let go, so your left hand and right elbow have to constantly balance the guitar while playing. You get used to it, but it can get nutty. A Jackson Kelly I had was like this. The strap position needed to be closer to the headstock too, but there was no upper horn, so it would neck dive AND tip forward. Quite annoying. Played fine sitting down. Some other guitars with the same rear strap pin position did not have this problem.
I had a bass guitar with really low output like that. Best I can tell, they were supposed to be active. Rather than put in the battery operated electronics they needed, I ran it through a 25dB boost pedal and it brought it back to normal line level. Still, that's really weird about the output level on these. Any chance of a hidden battery compartment on that guitar? Maybe it's in the neck pocket under the neck, you know, for easy access. :P
Regardless the amazing content and info, your channel is awesome for someone who's learning english. Even though I'm not the biggest fan of the 'american accent', I love the way you speak, it's so clear, open and articulate.
Congrats and I hope you grow a lot on CZcams!
Sounds to me, like you need to try out a steinberger, they require special strings, with dual ball ends. The tremolo, can be used to shift and lock the pitch of the overall tuning, effectively transposing on the run with the whammy bar. Also the tremolo is geared in a way that ensures the integrity of a chord even while the bar is being moved. They also have a fold out leg rest.
Steinbergers aren't that comfortable sitting down, unless you've got a short torso. The leg rest helps to keep them in place, but the guitar still sits too low. The Strandberg (and the Klein) shape is better for sitting. The Steinberger Synapse series had a combo headpiece that lets you use regular strings. It's great. But the Synapses don't have a trem. Great guitars though!
The pickup thing sounds like they might be internally out of phase. I had this exact issue with a seymour duncan pickup. Basically if you open the back plate and they are 4 wire pickups try swapping the north start and north finish wires on each pickup. On a duncan pickup it was swapping the black and white wires so the white goes to the switch and the black goes with the red for the series link
I put clear butcher block oil on those raw necks and they seem to come to life.
Hi Andre, I've been playing now for 50 years. And I totally agree, step 1 is always to play unplugged and see if the instrument speaks to you. I fell in love with a little Chinese SG at a local music shop. It had P90's and was very lively unplugged. The electronics were complete garbage though. I am a luthier so I had no problem replacing everything.
Looking at this guitar, I see a lot of potential, but also a lot of nasty. Definitely some great design ideas
Maybe a project for later....
Love the video, thanks for sharing!
Tip for dropping metal things on the floor such as the small tool in this video or the ball bearing you dropped in a previous video: get a magnet and run it along the surface of the carpet it’ll pick up any of the steel objects
For the input jack does it work with a 90 degree cable?
Yes it does. You are supposed to use 90 degree connector, but the reviewer would rather be stupid and not try that.
These reviews are so in depth, absolutely amazing
Ty
There's a headless by a brand called Bootlegger that's awesome, but I passed on it specifically because of the output jack. It's got the strandberg style cutaway, but they put the jack right in the middle of it so it's completely useless as a leg rest
Great video! Would love to see a Goc headless or nk or agile as they seem to be leading the sub 1000$ market
Great review.
So, if I understand it right, one could buy this guitar and replace the pickups, and reroute the jack, and it might be a real bargain as a studio guitar?
Yea, I think that would make it more useful for sure.
Some nice design features, and some perplexing. Maybe there's something wrong with the Volume Pot or the wiring. Did you check the output of the pickups?
Nope
@@andrefludd Here's a nice video by Phil McKnight showing how inexpensive and simple it is to test pickups even when they are installed inside a guitar:
Do Not Buy New Pickups before watching this. Sharpen My Axe
czcams.com/video/GEI6WENv990/video.html
I think it's a useful skill, and it can help pinpoint the problem when things are not going right. 🤓
My Eart headless guitar - the non-pro model - had this exact bridge. My experience of this bridge precisely matches yours. I can't say I particularly liked it. Setting intonation is OK but setting string height is *really* cumbersome. Tuning accurately is awkward without the crank tool as it uses a worm gear and needs a lot of torque. On the positive side, it did actually have very good stability once tuned. It's flat-mounted to the guitar body (no routing at all) so I ended up fitting a custom made aluminium flat-mount Steinberger-style bridge, meaning it now needs double ball-end strings (which are fantastic, but expensive). It's a lovely player as a result, and certainly a bit different!
Which begs the question... Have you ever tried the original headless guitar? Steinberger (actually Gibson since 1987) still sell their Spirit GT-Pro, a cheaper wooden version of the famous "L2" instruments popularised by the likes of Allan Holdsworth & EVH. They retail for a similar price to these Chinese Strandberg clones. No "chomp" for your thigh, but can comfortably be played at 45⁰ thanks to an inbuilt folding leg-rest, and are under 7lb. Crappy pickups but still quite a nice instrument, can be set-up very low for slick fast legato. I have one and really like it. Worth checking out IMO, if you're not sick of guitar reviews by now 😁.
Great work on the Strandberg experiment. All the best! 👍
So what was the cost of the guitar as it is now and what do you think you must add in terms of money, and hardware and electronics to make it a true winner, Lastly, would changing what you don't like make the guitar any better in terms of sound and usability? Thanks.
I have the same exact guitar, and I didn't have to do anything to make it playable. My pickups sound great with full volume, and the location of the jack didn't bother me at all because I use wireless, and that location is perfect since my leg rests on the upper part of the cutout clear of the wireless, also it's a non issue when playing standing with a strap. The bridge is kinda hassle because you need to use a tool to tune, but the tuners now have slots cut in them so you can tune with a coin or a pick. You can get them under $200 if you watch them go on sale. I think their other model GTWT-01 (same guitar except rosewood fingerboard) is on sale now.
I wanted to thank you for the video. It was nice to see an honest review, you had very valid points and I took them all into consideration. Originally after viewing the video I passed on the guitar. But then Amazon offered the guitar at the reduced price of $195. And I did so want to try a that neck. So I purchased the instrument. All in all I'm happy. The construction, fit and finish are good. I judge a guitar by how often I pick it up and I find myself reaching for this one often. I agree the pickups are not the best but with a little tweaking on the amp ( straight into a boss Katana ) I got sounds that I'm happy with. I understand there is a lack of quality control in regards to the pickups, I might have just gotten a good set . Love the neck by the way. Thank you again. If anyone is thinking of getting one, if you can get it on sale, it might be worth your time.
I’m glad I could be of help! Thanks for the update.
I have a headless EART and the screw on the opposite side of the intonation screw on the saddle being adjusted is supposed to be the height adjustment
Youre one of my favorite guitar intel channels my friend keep going. Has a rick beato interview podcast type feel. In depth look into important details that tend to get skipped over in review channels. And youre taking the bullet on all of these brands models ive never owned or tried before but have known about forever. My 2 cents: I actually dislike the parker neck tbh for being a bit toooo slippery its like driving a car on wet ice i just couldnt get control over my playing and sync up. Really prefer a little texture that ebony boards gives me. This is also the issue ive had with maple boards, my playing just seems to slide or slip out of syncopation. Idk why this is I believe i am slightly more heavy handed while playing, like a 6 or 7 out of 10 on my heavy style of playing, think if zack wyld is 9/10 for the pressure he uses. my fingers kind of slam down when playing fast so that if my picking wasnt 100% perfect during the run the notes still ring out clearly. This is also the issue i have with stainless steel frets. Just too slippery. Players might not understand there is a huge difference in your playing stainless steel versus non stainless, and there is a huge difference in feel with ebony versus maple that has a clear coat over the wood. I would play my ibanez prestige js1000 with rosewood and it felt quite middle of the road normal, then i would play my band mates ESP with a clear coated maple and it was just waaay too slippery to the point that playing was labored. Just something people might think about before ordering a new type of fingerboard or going to stainless or evo or steel nicol. It all makes a huge difference on your technique/pressure/speed and comfort. GG good video.
I totally totally understand. I love stuffing, and bread pudding. My gf finds the texture very uncomfortable. I don’t agree with her, but I
Totally understand why it would be a weird texture for some.
I don't know if it's relevant anymore but well... here it goes: from experience, the drop in volume may be caused by a grounded or ''semi-grounded'' potentiometer. Had it happen in my Ibanez once where one of the arms of the potentiometer was touching the conductive paint on the cavity and the output was almost none, wich i noticed fast since i had the pickup for a couple years before and it is a VERY loud one (520mv)
If you're curious the pickup is a brazilian-made Malagoli Neo, made with neodymium magnets.
I would assume the oils from your hands would really wear the neck in well. Kendama works similarly and it's a hard feeling to match when its "honed"
I didn't see anything in the comments so...
The neck is probably finished, but assuming you're right and it's not, it's relying on the oils of your hand to create a finish. It does work.
Interesting observation regarding the somewhat restricted width of the 'Berg's leg rest. The most comfortable guitar I've ever owned is a Dean Gordon Virtus. They're pricey but man oh man, what an experience playing that. Closest to those ergonomics ironically came from my Gary Kramer Turbulence 29 fret guitar. Both guitars utilize the curved leg rest albeit with the Dean Gordon it was more aesthetically pleasing the way he morphs it into the body. Thanks for another solid review and you've likely saved several guitar players from making this headless mistake from Amazon.
How does the Turbulence sound? I've seen some videos but nobody really does much of a job showing the sound off.
@@DaveDurango The USA models are fantastic but pricey on the rare occasions you find them. The imports require a pickup change but otherwise are fine guitars. Fret work is solid. Gary created a wonderfully ergonomic option for us but as could be expected, it didn't last long because unlike bassists, guitar players remain quite fickle to traditional designs. I'm convinced had he released the guitar after the headless resurgence, more guitarists would have been warmer to its shape and ergonomic benefits.
Not that it really matters BUT I had an issue similar with a Les Paul I have. Turned out that the pot was grounding to the electric paint and causing it to lose all volume. Might be worth checking to see if the pots are not making unnecessary contacts anywhere in that cavity
Thanks for saving me money. I had my eye on this.
Bro I literally busted out laughing whenever I heard you play the guitar plugged in and how quiet it was I cannot believe that guitar came shipped with those pick ups but then again I can because it’s an Amazon guitar
Hi Andre! Thanks for showing me a guitar to steer clear of. This is one of those cases where you played a guitar so that the rest of us wouldn't have to. You def took one for the team here. Btw, I enjoyed your podcast on Wednesday. I can relate to a lot of what you covered.
Cheers man! ✌
Thanks man! The second I put up the podcast, my practice plans took another huge turn so I may have to do a bonus podcast lol
Seems like if the company watched this video, made some revisions and released an updated version of the guitar, it could be something great.
Cant wait to see what your headless holy grail will be in the future.
Have you tried the Boya Ziqi headless?
Just as you mentioned in your other review, these guitars are a great starting point for a tinkerer like me. They will be getting better as they gain more popularity...
BTW you really need to check out the grandaddy of the headless -- the Steinberger. The history, the instrument and the designer are fascinating, and just like Parker, way ahead of their time. There is a super in-depth review by a guitar instructor on youtube who went from an really expensive Strandberg to a 400$ Steinberger and loved it...
Good luck with the channel...
What's the name of the guitr instructor's channel?
@@Ausemere It's "Bruce Darlington Guitar"
1970 a Guy named gittler made a all stainless guitar it was headless .
Yes, but unlike the Steinberger they are still being made as they were designed... There is a bass version as well. Peter Autschbach (a jazz musician) has a good demo and various live performances with the guitar on his channel!
Having an unfinished neck gives you the opportunity to apply finish oils to your desired slickness
i had a similar pickup output issue with my legator opus s 7, a super cheap guitar i bought when fanned fret guitars started popping up everywhere. looking in to changing the pickups over to some custom lundgren m7s as the guitar is cool and a tad quirky
Now all you need is a Bit holder for your drill, and Allen bits to go with it, as that wobbling may just turn out to wear those tuners and the drill out much faster.
OK, after watching the rest, maybe not for that guitar, but in general good and proper tools are always a good thing. I'm sure there are other things you use allen and other wrenches, torq's, screw drivers... for where the bit holder and bits will come in handy.
You can get allen wrench drill bits so you don't have to use that adapter, and the bit will be centered making it easier to use.
I know. I just didn’t have the right one handy
I lost it at the pickup output segment 🤣
Eart has a model with the same restring process. I belive it is the same bridge with the 2 of them not the one with thumb screw adjustments but the other with the little crank.
Dr. Fludd, I followed your links to the FREE courses, but all I found was one course listed at $39.99. Perhaps the website content got updated but not the link in the description of this video?
I’m in the process of updating some stuff on my site. Sorry for the confusion.
Are you sure the output problem is with the pickups? It's far more likely to be an issue with the wiring than the pickup. For that amount of output difference to be caused by the pickups not being wound enough, it would have to be REALLY underwound, to a degree that I can't imagine someone making that mistake on two pickups in the same guitar. Even if you were to split an underwound PAF or similar vintage HB it wouldn't be that quiet. I guess they could have put the two coils out of phase, or wired them to be in parallel instead of series, but I can't really tell because I can't really hear them.
Do you have a multi-reader? I'd be curious to see what the DC resistance is on them. I don't know what the pickups are, but underwound PAFs are usually 7-7.5k. if it's much lower than that then either they didn't wind them enough or it's wired incorrectly. If it's the former than there's nothing you can do short of having them rewound (and who would want to spend the money to do that?), if it's the latter then it could be easily fixed if you have a soldering iron.
Thanks!
Andre, I'm pretty sure you can get a hexagon bit for your drill. That Allen wrench/ bottle cap contraption looks dicey
Seems like there must be an actual problem with the pickups or something. Also I have an EART headless that has that same bridge and initially tuning by hand was very hard but it got better after use. Still don't know how to raise the strings though :P
The exact same hardware is also found on Eart GW2 non-pro btw. I personally don't think I would mind tuning with that little tool that much since I only play at home, after trying it for a bit I think I could get used to it. But man, the jack placement on this one is just way too stupid. How to disregard the biggest advantage of this guitar in a single decision
Abasi Guitars have a similar big thigh rest area, would be curious to see you review one of those at some point. Unfortunately my hands are too small for most 7 Strings, but their Emi model in particular is really nice
What is the cause of the missing sound?
"no finish" on the neck should be sealed at least with oil or wax. Music Man finishes nearly everything with Tru-Oil and gunstock wax, and I've applied that to guitars I've modified or built when dealing with neck woods that don't need grain filling, like maple. That neck looked raw. Without a sealing your own dead skin and oily sweat will become the finish.
I'd suggest the full size allen key is the best tool for tuning since you have accuracy in the additional leverage, but this is a killing point as to why I don't do headless. Tuners need to be instantly adjustable.
Final thoughts after watching full video. Great stuff as always. Love your attention to detail and great descriptions. Your channel has quickly become one of my favorites. 👍
Is there any way to find out what those pickups are exactly? I need to add them to my things-to-avoid-like-the-plague list.
Idk
@@andrefludd Fair enough. They're probably not worth any more effort anyway.
Most simple bridge ever on the saddles top allan screw loosens it the bottom allen rotates it up and down, and on the tuners back the Phillips head screw out a little bit and then the tuners move smoothly , for some reason they crank them down at the factory,I ordered that bridge a wile back and hated it at first too.
Great info! As someone who travels a lot for work, I was tempted to try this one. Now, I’ll pass. . .despite merely planning to play slow dad blues licks with it. 😝
I got a Harley benton and found that bridge to be better. The Harley benton would have a sitar sound on the saddle. I tried to file it every way i could think of and couldn't fix it. It took me a minute to figure out string hight but because you need to take pressure off of it.
There has to be something wrong with the pickups. I refuse to believe anyone would sell a guitar with pickups sounding like that! Maybe incorrectly soldered at the output jack? If they've managed to get the wiring backwards at the output jack (so it's wired with the hot to the sleeve and the ground to the tip) the total output would drop by a lot.
I know several accomplished guitar players that sand the finish from the neck before they do anything else...it's a preference thing. Eventually, hand oils will get into the grain, but it can be removed with any standard wood cleaner and then cleaned up with some high grit sandpaper.