How to Setup Parameters of T8S(BT)/T8FB(BT) by Computer

T8S(BT) how to set up parameters by Android or Apple mobile phone can follow my previous video here:
• Parameters Setup APPs ...
T8S(BT) how to upgrade firmware can follow my previous video here:
• How to Upgrade Firmwar...
T8S control the crawler to make technology agriculture come true
• T8S control the crawle...
The control distance of T8S(BT) is 2000 meters(1.24Miles) in the air.
Parameters can be easily set up and modified with an android or iOS mobile APP connected via Bluetooth.
USB upgrades with new functions added and keeps T8S always advanced.
Countless sets of model data can be stored.
The real-time model data feedback function allows users to receive the transmitter voltage and RSSI information.
When paired with receiver R8F or R7FG, the model voltage will display on the mobile phone APP.
More details about T8S:
www.radiolink....
You can buy our products from
www.radiolink....
You can send mails to [e-mail] if you have any questions during using our products.

[@islandrc-duke1972]

Great information and video my friend

[@Radiolink_official]

Thank you, Dear.

[@Odinochk]

Для bt версии обновляют прошивку, а для otg всë осталось старое. В чëм интерес к bt версии? Только в том что не нужен кабель для соединения, а в остальном остался тот же пульт

[@Radiolink_official]

Dear, thank you so much for using our product. Sorry that our OTG T8FB and OTG T8S have stopped upgrading. You can send mails to [e-mail] for Old to New.

[@alperdunga231]

i wish those numbers and values would be explained

[@Radiolink_official]

Hi, sir. Do you mean the values in the APP? Don't worry. You can check details on how to use the APP from the detailed manual of T8S/T8FB. It introduces all the details of each function. Here is the link for your reference. www.radiolink.com/t8s_manual If any question about RadioLink products please feel free to contact us. Our email is: [e-mail]

[@luigifiore1265]

I build an Airboat with differential thrust
I'm using :
1 pixhawk 4 (it comes with GPS and power distribution board) with ardupilot
1 radio transmitter, Radiolink AT10
1 radio receiver, Radiolink R12DS
2 ESC
2 brushless motors
could you please help me out with the differential thrust?

[@Radiolink_official]

Dear, thank you so much for using our product. We are preparing for the tutorial video about how to set up the flight controller and the boat. But it will release in May. You can send an email to [e-mail] to get help.

[@luigifiore1265]

@@Radiolink_official
hello I already sent you guys several emails and no one is answering, I have been trying to contact rediolink for about six months but no one answers back.
please take a look at your emails

[@Radiolink_official]

@@luigifiore1265 Dear, our after-service colleague has replied to you with several emails, please have a check. the setting steps are:
1. If you need to use PIXhawk to control a differential thrust airboat, then you don’t need to do any settings on the remote control. You only need to set up pixhawk through the ground station. You can refer to the official website of ardupilot. To provide you with the setting address of dual-motor differential speed setting:ardupilot.org/rover/docs/rover-motor-and-servo-configuration.html#rover-motor-and-servo-configuration
2. At present, what I can provide you is a method for dual-motor differential control without using pixhawk. This method only uses AT10 Ⅱ transmitter, you need to disconnect all pixhawk connections, connect the ESC of the left motor to channel 2 of the R12DS, and connect the ESC of the right motor to channel 4 of the R12DS, and then set up the parameters in your transmitter (This setting is based on the use of two-way ESC)
① set up 2:ELEV is REV and 4:RUDD is REV in REVERSE menu
② set up parameters in the menu PROG.MIX1: both up and down of RATE is +100%, MASTER is CH2 and SLAVE is CH4, MIX is ON
③ set up parameters in the menu PROG.MIX2: both up and down of RATE is -100%, MASTER is CH4 and SLAVE is CH2, MIX is ON