2014 Santa Fe - EPB Assembly replacement

2014 Hyundai Santa Fe 4x4 2.2 CRDi Electronic Parking Brake Assembly replacement tutorial. Auto Hold problem. EPB jammed on. Replacement part available on Alibaba.

[@alistairhutcheon7440]

Thanks Alan for doing this video, it helped a great deal when I had to replace my EPB. The only difference was I didn't remove the cross bar. The plug gave me a bit of trouble. Thanks Hutch.

[@BMCVFX3D]

Do you have a link to the part?
2015 hyundai santa fe error fault "c2402" on my one.

[@allanmckendrick7903]

x.alibaba.com/AwBFcg?ck=pdp
This link above is an example but it depends if you have 4WD or not, although check out this link before deciding on replacing EPB assembly.
www.hyundai-forums.com/threads/c2402-error-epb-auto-hold-lights-on-dash.699193/

[@Kevin-ee2tz]

Thanks for video. Did it require re-coding with a scan tool? Or was it just a case of clearing fault code after install?

[@allanmckendrick7903]

Fault cleared itself when new EPB plugged in 👍🏻

[@Kevin-ee2tz]

@@allanmckendrick7903 thanks. Just did one for first time. Much appreciated

[@user-by7ww9ky7l]

Hi, thanks for the video, really helpful. Please can you tell me how you unclipped the cables from the arm on ithe drum? I’ve unscrewed the Phillips head screw but because the cable is tight (I.e stuck ‘on’) I can’t seem to slip the loop from the arm that activates the brake.
That is a really bad description but I think you’ll know what I mean!
Many thanks

[@allanmckendrick7903]

No problem.
You should be able to lever it off with a large flat head screwdriver. Mine popped off with a lever. They will spring back when they pop off.