This Will Fix The Audio In Your Bronco! || Kicker Key 200.4/ 180.4 Install/ Review

Sdílet
Vložit
  • čas přidán 28. 07. 2023
  • Check out my install of the Kicker Key 200.4/ 180.4. This is the fix you have been looking for!
    -
    Kicker Key 200.4 - www.crutchfield.com/S-nUnisnE...
    Plug-N-Play Kits- plugnplaykits.com/collections...
    -
    -
    -
    Check out my Instagram for more and don't forget to SUBSCRIBE!
  • Auta a dopravní prostředky

Komentáře • 31

  • @AdventuresOfRogersAndHenderson
    @AdventuresOfRogersAndHenderson Před 11 měsíci +5

    Man, the factory setup leaves a lot to be desired! Thanks for going in-depth on the whole process.
    PS, love to poof of desert dust when you popped the radio surround out

  • @jasonallabaugh9129
    @jasonallabaugh9129 Před 8 měsíci +2

    I’ve had mine in for 6 months and absolutely love it.

  • @BroncoGo
    @BroncoGo Před 11 měsíci +5

    Great video Corbin. Keep up the hard work.

  • @Easyrecipeswithmia
    @Easyrecipeswithmia Před 11 měsíci +2

    Yay! New post 🎉

  • @garretkom
    @garretkom Před 10 měsíci +1

    Great job extremely thorough and well done.

  • @not12listen
    @not12listen Před 9 měsíci +1

    I'm already set on getting one of these as well. Thank you for the walk through of the installation, I'll be referencing this when I do my install.
    I cannot say if it is a limitation of the YT audio codec, but the audio you played comes across as missing a significant portion of the higher frequencies - they sound compressed/crunchy. I'm uncertain if you play compress audio (ie. streamed, mp3, itunes, etc) or if you play directly from an original CD or a FLAC file, as that would have a profound impact on the audio quality.
    As per bass increase, that is entirely dependent on your speak size. A 4 or 6 inch speaker will never produce bass even remotely close to an 8, 10 or 12 inch (or larger) speaker.

  • @douglaspayne5162
    @douglaspayne5162 Před 7 měsíci

    Great video. I have read a bunch of information about this amp. My understanding is that in order to get the base out of a factory head unit adding an LOC, line out put converter thingy will do that…
    I’ve never installed anything in a car before, I have a KIA Sportage, and I am going to give it a try. Thanks for the video, now I have a better idea of what it will be like to install.

  • @anthonygallo3576
    @anthonygallo3576 Před 9 měsíci

    Great vid, did u leave the factory speaker wiring or did u change that as well?

  • @timschultes6467
    @timschultes6467 Před 10 měsíci

    Nice job sir that sounds really good. I’ll have to do the same if I ever receive my bronco from ford lol

  • @karrpoollane
    @karrpoollane Před 11 měsíci

    I wantttt it 🤘🏾

  • @calotten9450
    @calotten9450 Před 9 měsíci

    Hi where did you buy that wildtrak grille? I see you have a big bend and I wan to upgrade my grille to

  • @krankertigaz
    @krankertigaz Před 6 měsíci +1

    So frustrated right now, I finished the bi amp key setup, all fine, happy tone, the music was playing nicely, moved to gain matching and fried both tweeters with the 50hz test tone, no limiter red light was shown or anything. I'm still trying to understand why the amp was sending such low frequencies to the tweeter. What could have happened, fader was OFF, Bi amp on, kicker EQ off, compression OFF, using just front channels, woofers connected to hear outputs, tweeter to front outputs. Didn't the Key setup separate the frequencies properly? why the tweeter got burned while woofer was not even close to limit and red light didn't come up?

  • @hectormadrigal1905
    @hectormadrigal1905 Před 7 měsíci

    Quick question, do you hear a small hissing sound when music is not being played?

  • @rubenrodriguez5644
    @rubenrodriguez5644 Před 2 měsíci

    Where do I get the wiring harness for 21 bronco

  • @chrishaugh1655
    @chrishaugh1655 Před 7 měsíci +1

    Just an FYI, my buddy has the B&O upgrade in his bronco and it still sounds like garbage. Ford really cheaped out on the sound quality for this vehicle.
    Also, can I ask what molle panel you're running on your center console?

  • @247riffraff
    @247riffraff Před 8 měsíci

    Is it louder? and how much louder would you say.

  • @christopherenoch4230
    @christopherenoch4230 Před 11 měsíci

    If I missed it, I apologize, did you change the size of your rear speakers? I put KS' all around. Size for size swap. I didn't know that you could go to 6 1/2 in the rear...
    I'm definitely getting this amp... Thanks!

  • @jodythomas
    @jodythomas Před 8 měsíci

    I really appreciate your great video. Stupid question but I was wondering if the balance & fade functions the same way with the amp installed as it did before. If you change the balance and fade does that mean you have now messed up the DSP settings? Thanks!

    • @qTravis666
      @qTravis666 Před 6 dny

      The settings will stay the same,
      Its just gonna move

  • @8654ZuluFoxtrot
    @8654ZuluFoxtrot Před 2 dny

    Is there a reason people are putting this specific amp in their Bronco's?

  • @MrKfcflores
    @MrKfcflores Před 6 měsíci

    Do you have the b/o system?

  • @gtamantube
    @gtamantube Před 2 dny

    WOW

  • @kuldipsingh366
    @kuldipsingh366 Před 10 měsíci

    Nice video! How much difference has it made?

  • @Brooklynn_Sting
    @Brooklynn_Sting Před 2 měsíci

    Wild u ripped ur car apart. Just so u know in the back seat on the passanger side is dummy box u take out and put the amp and kicker sub in lol 😂

    • @zachbarrett6428
      @zachbarrett6428 Před 2 měsíci

      I believe the amp needs to be connected to the ACM in the front. Installing in the back would make that difficult. Also, some broncos do come with an actual sub both B&O and non B&O

  • @user-ev6eh7mo1t
    @user-ev6eh7mo1t Před 2 měsíci +1

    Even the B&O is horrible

    • @qTravis666
      @qTravis666 Před 6 dny

      Its bc ford either still makes one of the parts, either speaker or amp. If the amp sucks the speakers will too… if the amp sucks, the speakers will regardless of quality