C-more HMI: Ethernet Quick Start from AutomationDirect
Vložit
- čas přidán 29. 09. 2019
- www.AutomationDirect.com/C-more - (VID-CR-0023)
- The C-more HMI (human machine interface) is one of the best values in industrial HMI. Not only do you get competitive pricing but the ease of setup and use will save you even more.
In this video, we show how to get connected to your HMI over Ethernet, to transfer your first project.
This video is part of the C-more setup videos that give direction on how to set up, use and maintain your industrial HMI.
If you need help understanding IP address subnetting or Default Gateway, please see the following videos.
*** Software version used: 6.50
**Prices were valid at the time the video was released and are subject to change.
Related AutomationDirect.com part numbers: EA9-T6CL-R, EA9-T6CL, EA9-T7CL-R, EA9-T7CL, EA9-T8CL, EA9-T10CL, EA9-T10WCL, EA9-T12CL, EA9-T15CL-R, EA9-T15CL, EA9-PGMSW - Věda a technologie
Would it be possible to connect and control 14ish hmis to a single do more plc with a big unmanaged ethernet switch?
Andrew, this should be possible. Performance is going to be dependent on the network quality and the amount of bandwidth.
Not working . My t6-cl nothing happens when I touch upper left corner
Thaks for the comment king.The upper left hand corner should grant you access to the System screen. I would advise calling into Tech support for help on this issue. 1-800-633-0405
Use a ballpoint pin with the ink part retracted or a stylus type stick it makes a more effective press on the screen and you need to use a hold action to bring up the menu
@@Fine_i_set_the_handle Hi Andrew ,
Need your help
Is it possible for you to Guide a bit.
Thanks