Holmes 750 Split Boom Wrecker In Action
Vložit
- čas přidán 10. 09. 2024
- In this video, Shane and I were sent to recover a rolloff that had gotten stuck in someones front yard. We were told we didn't have a lot of room to work. We responded with our 1985 Freightliner with a Holmes 750 bed on it. AKA(The Gopher) We used the split boom to stabilize the drivers side, while we winched off the passenger side. Hope you enjoy the video. Thanks for watching, don’t forget to LIKE, COMMENT, SUBSCRIBE, and SHARE this video!
Email Me Here- Sumterwrecker@yahoo.com
Send Mail Here-
Hal Watts
324 Green Swamp Road
Sumter, SC 29150
Follow Us on Social Media
Facebook - / sumterwreckerservice
Splitting and swinging booms...so old but in a way still ahead of a time. What a great design. No wonder you like it so much.
Mr Aljosa Yes sir the rotator in its day. Thanks for watching and stay safe
Only one thing better than a Holmes 750.....that's two Holmes 750s...did a lot of work with an old 750 on the back of a 1976 KW back in the day!
Now every job is a ROTATOR JOB!!
Mr Paul That was the truck in the day. Thanks for watching our channel and stay safe
We still have an old 74 White cabover with an old Holmes split boom not sure what model but we use it on a regular basis to pull stuck farm tractors and equipment everyone around us run those huge tri axle rotator trucks and many of them won't touch stuck farm tractors and equipment because the are usually no place near a road or hard surface and they are afraid to go out in fields with their trucks. We take our old White out where others won't go, we also have and old 5 ton military tank recovery unit for when we get the old White stuck.
Mr Brown they are tough wreckers for sure. Thanks for watching and stay safe
Nothing like the power of a fully mechanical system. They talk to you and if you understand what it’s telling you you’re a great operator.
Mr James Thanks and we appreciate you watching our videos. Stay safe
Never had my boss "ask" me do you mind doing this or that. He usually said go do this or go do that... From what I have seen from your videos you are the kind of boss I always wanted to have but didn't. You show respect no matter what the situation is or who you are dealing with be it either employee or customer. Yessir you are the boss I never had...
Mr Johnny I appreciate that. Thanks for watching our channel and stay safe
Or haven’t
Mr Tom thanks for watching and stay safe
I agree 100% Johnny. You never see a boss this involved in his own company anymore. From what I have seen he is the nicest man you could meet. This man deserved my subscription.
I love the fact when you ask your helper for a shovel for yourself that he brought one for himself as well without telling him to help you! that's a good man!
Mr John We appreciate that. Thanks for watching and stay safe
Your newer trucks are going to be jealous of how many views the old Holmes is getting.
Mr John that is true. Thanks for watching and stay safe
there is something majestic about twin boom wreckers. thx for showing the Holmes tree and landing mat techniques.
Mr Rob thanks for watching our channel and stay safe
Im so glad you posted this video. I have been trying to find one of a 750 in action. I have a 1982 on a Ford L9000. We are cleaning it up and getting it ready for the road. I am originally from Atlanta and Spider Wrecker had a fleet of 750s. My dad always said they were the best. In about 1980, we bought 2 from the Navy in CA, they were on junk International chassis. We drove my 1979 GMC Astro out to get them, it was summer and there was no working AC. We never re-chassised them and I guess he sold them to an operator somewhere. fast forward 10 years and we bought one from the bankruptcy of Eastern Airlines, we re-chassied that one to a GMC Brigadier and ran it all over the southeast. Fast forward to today, at 60 I am on my third career in Aberdeen WA, putting together a heavy truck towing operation with an old 750. the adventure continues. Maybe I should post videos too.
Mr Timothy I love watching the old wreckers work. Thanks for watching and stay safe
The Holmes 750 was the Boss of heavy duties back in the day.
Mr Ed thanks for watching and stay safe
I love those old trucks. My first truck was a Chevy 3500 with a homes 480 on the back, my second truck was a international with a home 750 just like that one. They don't break down like the new trucks all the computers and such. You can pull until something snaps lol.
Mr Jacob you are right they pull until something gives. The casualty or something on the wrecker. Thanks for watching and stay safe
Hard work and common sense are the best teachers I can relate to that.Great video great content and great people.
Mr Russell thank you sir. Thanks for watching and stay safe
Jamie Davies would love that old tow truck. It was worth its weight in gold on that job.
Mr Ty yes sir it was. Thanks for watching and commenting. Stay safe
It's nice seeing old rigs still putting in work this is the truck you should take JC Smith out in
Mr Michael he would probably love it. Thanks for watching and stay safe
@@SumterWrecker I know he would
Great video, I run my whole business with 22 plus year old equipment. So nice to see the older equipment still in use. I think the truck was older than Shane.
Mr Ssnyder yes sir I is older than him. Thanks for watching and stay safe
Brought back memories, I used to operate a Holmes 750 on a 1975 GMC 6500 (I think) single axle. That was back in the early 80's.
Mr Rayar54 thanks for watching and stay safe
ONE OF THE BEST WORKING BEDS IN HEAVY WRECKER
Mr David They are strong and tuff, Thanks for watching and stay safe
Great job winching it out. Also nice to hear you talking about your dad and how you have remembered what he said and taught you about hard work.
Mr Riley I really appreciate what he taught. Thanks for watching our channel and stay safe
love them holmes bodies! i got started by my grandad with a 1946 dodge w5 that was shop built for ideal bread company....... had a flat head 6 and purred like singer sewing machine......
Bvfdfire1 thanks for watching and stay safe
Ain't nothing like an old chain drive!
Mr David that's correct. Thanks for watching and stay safe
Didn’t even make that Ole 750 grunt. All these folks wanting these flashy new rotators and that Holmes split boom started it all. Worked many Holmes units plus worked a military wrecker. These new operators have no idea about a 4x4 wood timber and good ole 440 Holmes.
Radio one receive yes sir Holned was the wrecker in the day. Thanks for watching and stay safe
Watching this one really brought back some old memories of my first split boom experience it was a Holmes 600 on a single axle White road tractor we lengthen to fit the wrecker body. I split the booms and picked a full-size car out of a stone wall drain ditch it had flown into. I picked the car up on one side and the front of our small wrecker counter balancing the other side and drove away from the ditch without even a scratch. I really enjoy watching you and your crew you guys are the best and really down to earth crew I’ve found, God Bless you all and stay safe
Mr John. We appreciate that. Thanks for watching our channel and stay safe
Look at that,I’ve never seen a 750 ,booms split pulling off the side.Thank you.You can tell you know your way around a shovel!
Tickled me to hear that pto chain rattling,takes me back.Thank you sir,it’s nice to see you treat your young like that.You are a gentleman
Mr Don We really appreciate those kind words. Thanks for watching and stay safe
Thanks for the video second time I watched it that home 750 was a work of the art back in the day enjoying seeing it in action again thanks
Mr Les Yes sir that was the rotator in its day. Thanks for watching and stay safe
Love the holmes 750 manual wrecker body. i have seen several around here still in service. nice recovery...smooth and easy.
Mr JC someone suggested you do the ride along in that truck. I said you would probably love it. Thanks again for your support. Stay safe
She's a little beat up, but still gets the job done. Thanks for the video. I'm too young to have ever seen one of these still in service.
Gen15 thanks for watching and stay safe
That old Holmes was similar to one we had on an 8 legger (8x4 AEC) in the UK in the late 60's.. I've just woken up from a nightmare!!!
Mr Max. Thanks for watching our channel and stay safe
It probably was and I can almost bet Max that it was bought from Bill Jackson of Internal Wrecker Sales.
Great job. Brought back lot of memories working for my Dad while in High School and college. Thanks for sharing.
Mr Joe thank you for viewing and stay safe
We had a 750 on a 80 Mack. If you've never owned one then you really can't appreciate hydraulics.
Then again back then there were only two kinds of wreckers. Holmes and H & M. (home-made)
Another fine job.
Mr Chester thanks for watching and commenting. Stay safe
My dad had a couple of those 750s back in the 80s. Loved when we had a call to take it out. Those trucks will make you a man or make you go home.
K cook they are tuff wreckers. Thanks for watching our channel and stay safe
*Damn big tow trucks have come a long way since the Holmes 750 came out. This was the super heavy rotator of it's day.*
Alilretard1 yes sir it was the truck in its day. Thanks for watching our channel and stay safe
That’s old school towing. Worked for a Texaco gas station that was AAA towing and they had a Holmes split boom. Never got to use it but in its day it was the wrecker to have.
Mr Flyerbob1 yes sir it was. Thanks for watching and stay safe
used to ride on a rotation wrecker when I was 16 a chevrolet with holmes 500 split boom.. loved how fast you could put it back together and get gone. cut my teeth on recovery then, and in the Army...
Mr Waltjam thanks for watching and stay safe
That is a great old wrecker, thanks for showing it in operation.
Mr John thanks for watching. Stay safe
Things never go out of date when they still do the job Great video thank you
Jon thanks for watching and stay safe
Love watching an old rig still in use. That old 750 is stronger than some of the trucks today if you know how to rig them. My great grandfather had a dump truck from the 1800s. It had solid steel wheels with paddles, no tires. To dump the bed you had a handle crank. Two giant gears between the bed and the cab. You had to crank the handle to raise and lower the bed.
Mr Brad that sounds like an awesome old truck. Thanks for watching our channel and stay safe
good to see the split boom working-- technology has come a long way and spoiled us on this new equipment
bidia1965 yes sir it has
Thanks for watching and stay safe
My friends own a 1.5 ton 1956 GMC with Holmes wrecker that he had modified the wrecker right winch that was at a lower gear to haul in heavier recoveries. Harold Lemay also modified the brakes for air assist for air brake action. It is stored at the family museum at Lemay Family Collection at Marymount just south of Tacoma WA.
Mr Colin thanks for watching and stay safe
Your 3 to 5 shovelfuls to their one showed your Dad did a good job and you too. Thanks Mr. Hal for good entertainment; love that truck!
Mr John thank you sir. Thanks again for watching and stay safe
Mr Hal this one reason why I like your channel so much better. The other wrecker channels all have painted chains that look like they’ve never been used, brand new straps and 3/4 million dollar rotators they are scared to get dirty...meanwhile your snatching them out with an old rusty Freightshaker and a piece of rusty floor grate and talking about the old days.
If it keeps on raining down here y’all are gonna be mighty busy the next few weeks. Be safe and make that money!
Mr Nick thanks for that. We use what we have. Thanks for watching and stay safe
I love the heck outta that ol truck..
Reminds me of my upbringing. Neva had a new piece of equipment on the farm. It was always new to me and we made it get the job done
Mr Tony Thanks I know that feeling very well. Thanks for watching and stay safe
This is the first time I've ever seen a 750 Holmes in action Great vido
Mr Russ thanks and thanks for watching our channel. Stay safe
That is sweet I remember seeing it new when I was younger thinking it was the baddest truck. That thing can pull a house down lol Keep safe gentlemen
Mr Joseph. We will and you do the same.
Excellent video and great old iron!! Back in the days there were many wrecker manufacturers and Holmes was ' The Cat's Meow ' . You're a very respectful young man!!!
@@dp.oennismaurer205 thanks for watching our channel and stay safe
I like all of your Video and I like how Shane and joe is learning from you and Brandon to you be safe out there and I hope to see what your shop look like
Mr Eric thanks and thanks for watching stay safe
now thats a real heavy duty old time wrecker have not seen one in Rhode Island in about 15yrs the last time i seen a old holmes was mounted on a mac body cab and chassey pulling out a 18 wheeler out of a snow bank on interstate I-95 during a nasty snow storm thank you for the great video looking forward to the next one as always keep safe and god bless
Mr Roger thanks for watching our channel and stay safe.
Never had seen a rig like this nor those crates used. One of the few that's not afraid to use a shovel to make the pull easier. I'm impressed with your skills.
Mr AK We really appreciate that. Thanks for watching and channel and commenting. Stay safe
Still to modern day old school can still be the best way.
Mr Scott thanks for watching and stay safe
Roll off driver here. Here's a good trick to keep in the back of your mind when dealing with a stuck roll off. When the bed is raised, the end of the rails and the tail roller will hit the ground and lift the back of the truck. If you can find something to put on the ground as a base, you can jack up the back of the truck by raising the bed. You can change drive tires without a jack, or in this case, lift the drives out of the hole. When I get stuck I usually do that, and fill the hole in with lumber scraps or masonry scrap. As often as not, I just drive out.
Mr Jeff thanks for the tip. I have used that trick in a rollback but didn't think about it with a roll off. Thanks for watching and stay safe
Love seeing the old iron doing what it is meant to do.
Mr William Yes sir. I couldn't find a working video of one on CZcams. Thanks for watching and stay safe
That was nice sometimes old school works best it keeps you humble hopefully one day you'll be able to restore yours like Jammie Davis is doing. Thanks for the share and hard work never hurt anyone I was turning wrenches with my dad around the age of 7 that knowledge has served me well over the past 46 yrs since I started helping him in the garage
Mr bigdawg You are right about work. Thanks for watching and stay safe
My old man had a bunch of 750s and 600s. I'm only 42 but grew up in businesses and I remember in early 2000s the old man sold a couple wreckers real quick and didn't have replacements but we still had the old 86 W900 with 750 on it and I ran that for a few months and did alot of shit with that old trk that just sat and sat for probly 10 yrs with minimal attention paid to her but when it came time to go, she fired and dragged whatever you wanted. Loaded log trks, loaded tri axles, tractor trailers and on and on. Just a little more work with bumpers and stuff but she did the job. Love to have another cuz I hated when the old man sold that old wrecker. Also like the brake pedal holder haha!! We always cut off a piece of pvc and jam in between bottom of dash but whatever works how bout it. Thanks for the post.
Mr Kramer That's the same with this old truck. She only runs once in while but always gets it done. Thanks for watching and stay safe
When I started out towing the Holmes split boom was and still is the recovery king. We did a lot of recoveries with our Holmes This brings back a lot of memories
Them yunguns don’t know what they’re missing out on
Mr William thanks for watching and commenting. Stay safe
Just found this video. Cool operation. They used the Holmes split boom wrecker sets during WW11. Used on Canadian CMP 3 ton trucks as well as US made trucks.
Mr Darrell I didn't know that. Thanks for that information. Stay safe
Fantastic, common sense, and hard graft. And let's not forget, DAD.
Mr Keith Yes sir. Thanks for watching our older videos and commenting. Stay safe
This old school is that a 30 ton or 40 ton unit. Seen the one Jamie Davis has and refurbished it working in very coldweath er .
Holmes 750 is a rated as a 25 ton. However it is extremly under rated.
Mr Scott It is rated at 25 tons
@@dandunning4409 i do believe that's at a full drum not like the way most rate stuff on the first layer now.
It's great to see a old school wrecker still in use would love to see it fully restored
Mr Fred thanks and thank you for watching our channel. Stay safe
At first I thought it was going to be a dead pull. Turned out very good with the stuck truck with the power assist. Nice recovery. Always nice to have someone to help drive the stuck vehicle out that cooperates and doesn’t work against you
Mr Dan thanks for watching our channel and stay safe
Drove Holmes 750 Wrecker for the Boston Fire
Department Motor Squad as a Motor Squad Firefighter , great unit . It was mounted on International Harvester Severe Service Chassis .🇺🇸🚒🇺🇸
10832894 thanks for your service and stay safe
Another great job with the original rotarer. There were several in my part of the country in the 70s and 80s. Had a propane has truck sink in a gravel road 1 hook on the truck and other swung around tied 2 a tree wrecker was completely off the ground swinging like a hamick walked me right out. Loved the comments about your dad.Mine got a heck of a education some were when I was between 14 and 22 at that time I didn't think he knowed anything.
Mr Larry thanks for commenting and watching. Stay safe
Mr. Hal I'm glad you videoed this recovery so people can see the equipment that was the main front line wreckers of the old day's. Several company's still use the 750, 800 and the 1801 as their front line equipment. I still say the 750 was extremly under rated at only 25 Ton. People don't realize having a 750 is just money in the bank. Nice recovery guy's, be safe and always remember your safety is the most important factor on any tow or recovery.
Mr Dan thank you sir. We really appreciate you watching and commenting. Stay safe
Thanks for sharing your truck with us
Mr Verda Thanks for watching our older videos and commenting. Stay safe
Hi 👋sir I'm very grateful to you for you taking the time to bring great videos 📹 I've not met you but watching your videos I have the greatest respect for you you're a star in the way you conduct your self and speaking to the people take care stay safe godbless you your friend Tony
Mr Tony I appreciate that. Thanks for watching our channel and stay safe
Loved seeing old technology working. Definitely deserves a refurb and see it again. Loved the hi-tec brake lock just needs a hole drilled in the brake pad.
Mr Phillip that's a good idea. Thanks for watching and stay safe
As always she'll do a great job and I love the old 750 homes trucks and 850 there the old iron horse in the world I think that out work the new modern-day recket
Mr Chad Thanks for watching and stay safe
I ran a750 back in the early 90's. Mounted on a 1963 International cabover with a Detroit 2cycle diesel. It would move it or break it.
Mr Duane thanks for watching and stay safe
Thanks for the video of the split boom in action! Lots of work , but definitely gets the job done! Take care and Stay Safe !
Mr Brad Yes sir, she is old but still a work horse. Every time I used this truck it makes me appreciate the older tow generation that much more. Thanks for watching our videos and stay safe.
Taking it easy in retirement after 37 years as a over the road driver! 👍🏻👍🏻👍🏻
@@bradsnyder-HighSprings_Fl. wow, that's a long time. Now sit back and enjoy it. Thanks for watching and stay safe.
What he’s calling a “landing mat” got its name from a WW2 invention, the Marston Mat, which were invented as a way to build landing strips for military aircraft on soft ground in a matter of hours instead of weeks. The originals were steel mats slightly narrower and twice as long as what’s shown here that were made to interlock to each other and were of a different construction, originals being made of solid steel sheets that had holes punched into them to save weight and aid in them settling on soft ground and ribs stamped in to add stability. Army units found in addition to being good for their intended purpose they also made great traction aids for wheeled vehicles on soft ground, you could lay them out in the nastiest of swampy mud or soft sand and drive trucks,trailers and jeeps right over them. After the war there was such a huge surplus Americans bought them and used them for everything from fencing to walkways to what you see these fellas doing with them. They were so popular the name “landing mat” stuck and is still used today to describe steel mats used for building roads and recovering vehicles over and on soft ground.
Mr JR My father was a farmer and he believed in these. It is amazing how they help vehicles climb out of holes. We appreciate you watching our videos and commenting. Stay safe
Good video ,that old Holmes is still a Hoss and those Cat engines run forever if you keep em serviced 👍
Mr Cliff Thanks and thanks for watching. Stay safe
It be great project if you guys would do a loving restoration of the old girl to keep her around at least as long as she has been by now. She has earned it twice over!!
and we your audience would surely enjoy a vlog like documentary of the process!!!!
Mr Lucas thanks when it happens I will sure try. Thanks for watching and stay safe
Got it thanks and stay safe
@@SumterWrecker same to you and your employees
i towed back in the 80s. thats sum good tow truck rite there. great work .from ont. canada. nelson
Mr Nelson thanks for watching and stay safe
We had a flipper toggle air valve on the back of my 750 Kenworth 1975 coe, it was a duel Function nutral, and air on top of the-spring to push harder on the spring cans slack adjusters s cams, you know if you needed the brakes locked , and the other position would free up the brakes , I use that function way more to move the truck in to position when hooked up with under reach Zack, it was mounted on the drivers side at the bottom of the back of the tow bed, below the two manual winch controls , I had to some times let my booms down to get them to lock back easier, oh yes it all pays the same , loll, nice job 👍 thanks BigAl California.
Mr Al wish I had something like that. Thanks for watching and stay safe
Now that's old school, brings back the old days in the old field. Everything was chain drive and pens. Like watching old iron.
Mr Dennis thanks and thank you for watching. Stay safe
@@SumterWrecker i would had let the boom down so the cable wouldn't move up while on the tree while pulling
Mr John that was our next option. Thanks for watching and stay safe
@@SumterWrecker thanks"
Yall should do more videos with the 750.I passed one of yalls trucks near bishopville today in my rollback. Good recovery
Sturks We will try. Thanks and stay
Gotta love the ol school truck an ol school ways nicely done
Mr J Walker Thanks and thank you for watching. Stay safe
With the old equipment, we used to do a lot of shoveling to ease the load, but with much more powerful winches, digging out seems redundant
Mr Kevin yes sir Thanks for watching and stay safe
Great seeing an ole 750 in action. The operator up in British Columbia "Jamie" rebuilt one and put it in service with some wicked recoveries.
Mr Daniel thanks for watching our channel and stay safe
Love seeing them old trucks put to work.
Tripod B thanks for watching our channel and stay safe
the old freight shaker looks good
Mr old man thank you sir. Stay safe
Great to see a Holmes twin boom at work, love to see more of that old truck in action when you can. I’m a real fan of your channel, keep up the great work, thanks Phil
Mr Phillip I appreciate your support. Thanks for watching and commenting. Stay safe
Mighty Mo up in British Columbia
Mr Lukas mighty mo is a beast. Thanks for watching and stay safe
nice two truck watching from nova scotia ,Canada God bless
Mr Ronnie Thanks for watching from Canada and stay safe
It is interesting to get to see how it was done a long time ago .
Mr Ron thanks and stay safe
I really enjoyed seeing this I forgot about the old equipment cuz you don't get to see it anymore it's nice seeing that it's being used still take care and have a good day God bless
Mr Edward thanks for watching our channel and stay safe
cool old truck. looks like just the right tool for the job. i remember running a old mechanical oilfield winch truck that had mechanical winch on it. you had to be careful with it because it wouldn't stall out like a hydraulic winch it would just keep pulling until something broke.
Ezrider359 very very true. If you are ever slow and need a project let me know. Lol. Thanks for watching and stay safe
Thank u have a good day ,week,month. Working old one like this is a personal work out also.
Mr Scott That is very true. Thanks for watching and stay safe
wish we could see more old school towing really like the older trucks
Dependable auto Will try to get some footage of towing. Thanks for watching and stay safe
Yea thats the ones that pull.til.somerhimg gives or breaks
Mr Vaughn yes sir. Hydraulics stall out. Mechanical does not. Thanks for watching our channel and stay safe
It looks like an old line wrecker car. Good job👍👍👍
Thanks and thanks for watching. Stay safe
Really like your content and channel. I like all the different things you guys do
Mr Aaron I appreciate that. Thanks for watching and stay safe
I wish I could like this video more than once! Great job, I love your channel. Stay safe out there!
Steel fist We appreciate that. Thanks for watching and stay safe
Now thats a great old tow truck! Hope to see more videos of it in use
Mr Tim Yes sir. It makes me appreciate how much older wrecker drivers had to know to recover trucks. Thanks for watching and stay safe.
That old truck would look awesome with a little TLC I hope it happens someday. Good recovery there.
Mr Tom It will. Thanks for watching and stay safe
That was cool - thanks for the video.
A local towing outfit here used to have several of those Holmes wreckers, I think back in the late 1970's. They also had a bigger version of the Holmes, or maybe it was another brand, I don't know. It was on an Oshkosh looking truck with 2 steering axles. It might even still be in their yard.
With a good operator those Holmes trucks could do some amazing heavy work, plus they weren't so long and huge like modern recovery trucks.
Mr John thanks for watching and stay safe
@@SumterWrecker Thanks. Here's a picture of them showing off 45 years ago. Kind of like Miller does now.
www.pinterest.com/pin/336855247099172261/
Mr John that is a cool picture. Thanks for sending the link. Stay safe
Nice work utilizing the Holmes 750 bed as it was built to do and that's a great idea with the " landing mat " !
Sure made a big difference after you fellers got the wheels cleaned out and ramp shoveled out .
Keep up the great work !
Crane and rigging. Thanks and thank you for watching our channel. Stay safe
We still run a 750 on a main work horse. However... it isn't a traditional 750 twin boom anymore. It's strictly used as a side puller. Converted to new hydraulic drives, wireless remote controls and heavy hydraulic outriggers. Also has a DTU body for towing and storage, pulls a landoll or any other trailer when the DTU is off.
Mr Jordan sounds like a cool wrecker. Thanks for watching and stay safe
Wow! What an old Dinosaur! You don't see them anymore!. NOT the Truck, The 'Family Video' store you passed in the beginning! You just don't see them anymore!....LOL Love the wrecker!
Mr Tommy I am not sure how they are in business. Thanks for watching and stay safe
We have a 480 on a 84 GMC crew cab chassis that has a single cab now. The extra wb is nice leverage, it's a monster for its size and WAY underrated on capacity. 750s are unbeatable for pulling like this and you're not trying to fit an 60 ft truck in 40 ft of space!
Mr Jim that's one problem wit this truck. It's short and stands up easy. Thanks for watching and stay safe
That’s what u call old school towing like that old truck😎👍👷♂️
Mr Rob thanks. Stay safe
that old truck is amazing luv it
Mr Leon thanks and thanks for viewing. Stay safe
I like everything about that old holmes but not a fan of the mouse trap brake switch! 750 is on my bucket list of wreckers to own. Awesome truck and video!
Not for hire The switch needs a little tweaking or just use a 2x4. Thanks for watching and commenting. Stay safe
@@SumterWrecker yeah jam a 2x4 under the seat and drop it down 😂
Old school things is better many times! Love your videos!
Mr Ulf Thanks and thank you for watching our channel. Stay safe