Full Build - RC4WD Trail Finder 2 - Pardonmyn00b's Turks and Jerps
Vložit
- čas přidán 7. 09. 2024
- Full build of an RC4WD Trail Finder 2 with Mojave body set with a few modifications thrown in for good measure. This particular build is a replica of a real truck, maybe you know of the very one. If you'd like to see more build videos please let me know! Thanks for watching.
Turks and Jerps merchandise: turks-and-jerp...
#smigginsfolly
#rc4wd
I could watch your build videos all day. Even the endless sanding. Your attention to detail is amazing. Thanks for sharing.
I feel like 75% of the hobby is sanding.
I love watching others build. I always learn something new.
It's kind of fun to watch yourself build. I don't notice some of the things I'm doing until I see it on video.
@@turksandjerps some of the items you used to fill in the body holes and other techniques you used made me go.... Huh? Wha? Ok that turned out great! We need more of these videos plz
I love this truck so much!! I was going to go for a similar build BUT, I do not have half the talent. lol 🔥 ❤️
Try it and you’ll find it’s not that hard. Just take your time
Right??? Same here, I don’t have the patience… but watching these vids makes me want to go and buy some cheap parts and try some stuff.
Wow, Scale builders guild just referred you. I am so glad I got to see you at work.
Scale Builder’s Guild nice, thanks for dropping by
I think Noobs been around lot longer than SBG lol. Should be the other way around.
Excellent content. No BS, just hard work. 5 STARS Subscribed.
Thanks!
Nicely done!! Blue hubs, round headlights and Cruiser caps for the 4:56 79/80s... perfect.
Cheers! All about the details
Just plain AWESOME!!
Thanks
Insane building skills… your videos are soothing, informative and mesmerizing.
Glad you like them!
All I can say is WOW👏...
Love it! Love the attention to detail, especially the fact that the lower front of the truck is all one piece and the grille and bumper are seperate pieces.
Glad you like it!
Absolutely mind blowing.
Yes. More builds! Outstanding work as usual. I had no idea those kits had an interior package, AND with that much detail too. Thanks for sharing. Not sure why the tiller is on the wrong side though.....
The kits don't come with the interior, it has to be purchased separately. The body only comes with a less detailed dashboard/no seats
Amazing man! Great work and attention to detail!
Was a pleasure to watch. I think I learn something new from every build I watch of yours.
That makes this all worth while
Nicely done! I appreciate all your tricks to the hard body, I just got my first TF2 and hope it comes out half as good as yours!
Thank you! Shouldn't be too hard, have fun!
Came here from Roman Atwood’s channel, this is AMAZING!!
Thanks for stopping by!
Incredible build process and finished product!
Thank you
Amazing work as always
Excellent work, love your style. But I really don't think it will be hitting the trails... maybe a trophy 🏆 truck ?
Awesome job, cool to see the different techniques.
Thanks, I hope there's some interesting things for people to see and learn.
@@turksandjerps definitely a cool way to showcase the different ways. I usually keep a photo album of my builds, and shre them with people, especially people that are new to building. I'm no master, but can definitely help people kick off their builds with some inspiration if anything.
My question is how you filled in the body holes, how's it mounting to the frame? I juts fill the holes, and use the screws from rod ends and pull the body over them and they sit in the back side of the body.
That looks terrific! You make it look so simple.
If anything, I make it look difficult.
I just orderes the build kit, it will be my first ever build very excited
That’s great, have fun with the build!
@@turksandjerps i got some questions about the mojave 2 body
What kind of tools do you recommend i get?
What kind of glue do you use?
Any tips on that or beyond will be amazong
Thank you
@@richlee7047 What kind of tools do you mean in particular? For like assembling or modifying? I have a video about glue that might be worth a watch.
@@turksandjerps thank you for the reply
tools for assembly, to like cut everything up, smoothing out parts i cut.
Also yes for modifiying or just tools i should have for this type of build.
I will look for the glue video
@@richlee7047dude just watch his videos. You will learn EVERYTHING you need to know. Noob has been around as long as I can remember, making beautiful trucks.
Great work Mr. Jerps.
Thank you
You did an OUTSTANDING JOB ! I love it !!! Turned out amazing
Thank you so much!!
Outstanding
Man that came out looking sweet! Great job 👏👌😎👍
Thank you
Beautiful.
Thank you!
Nice flex. Very nice build. I should probably do a clean build soon
Needs less flex. Clean builds are too hard.
All the goodness 🤌🤌🤌
That's a awesome build 👏
Thanks
hey that is a a nice work :)
Awesome 👏👍🙃👍
Great job! Your amazing love watching you! Have a Happy New Years
Thanks so much, you too
I was waiting for the dumpster to jump out.
Watch again, maybe one will
Amazing stuff as always! This looks like a replica of Roman Atwood's white Hilux.
I built this for him. No joke. Commissioned by previous owner to make a replica for the new owner.
@@turksandjerps That’s awesome. I don’t doubt it. It’s a PERFECT replica of his truck, right down to your hub caps and graphics… Now I just need to give you a commission whenever you’re ready 🤙
PLEASE more builds dude
Ok, sounds like a plan. Thanks for watching
love this video..amazing...on the front antenna what did u use?and did the hilux side emblems come with the back being sticky on it?...i have the cchand hilux emblems and i need to use some type of glue bc there is no adhesive backing on the emblems...any informations on my 2 questions will be greatly appreciated...
Thanks! The antenna is a piece of music wire. The emblems weren’t adhesive I think I glued them with CA
Your zenning me out bro
Hope that's good thing
Seeing your work in that commercial was great. Did you build it for them or did you keep it?
What commercial?
🤘🍻🤘
I am curious as to your opinion on the new TF3 and if the chassis is suitable for any of your future builds?
I’m going to pass on the TF3. Two steps forward, one step back.
@@turksandjerps the chassis is slightly more scale in terms of appearance. But the rear leaf setup is messed up. They really need to make a chassis like the RCRUN 80. That’s a very scale setup.
What putty are you using at the 5:27 mark? Why are you using that over the Bondo product? Just found your vids and I'm hooked! In the process of building mine
It’s USC Icing. A two-part putty like this harder and less likely to shrink.
@@turksandjerps ahh that makes sense. Definitely going to use some of your ideas in my build. Your's turned out awesome!!
Very nice sir. How did you attach the body to the chassis? Thanks for sharing
👍🏻👍🏻🙃🙃
Those countersunk bolts I installed into the rocker panels and covered up go into the stock body mounts on the side of the chassis. I drilled out the posts to accept the bolts as a pin. Just pry the body out and snap it into place. And I kept the rear posts as stock. Hidden by the canopy.
@@turksandjerps
Clever 👍🏻 Awesome thanks mate 🙃👍🏻
What paint brushes do you use, the handles look really comfortable
I have all sorts, mostly cheap things I find here and there. I'm hard on brushes so I don't invest much.
@@turksandjerps thank you!!! So many guys think they need to recommend and buy some $100 brush…
Looks like Tom’s!!
Good eye! Yes, it's for him.
@@turksandjerps He’s gonna love it!!
Where abouts did you get the wheels from?
From RC4WD. Everything on the truck is from them.
How did you make the antenna 📡
It's just a piece of music wire.
What types of glue is that
Are you using starbond glue?
The black glue is
Did the bed kit come with the chrome tailgate handle or do I need to buy the parts tree? Thanks!
I’m pretty sure the tailgate handle comes on the chrome parts tree that includes door handles and the marker lights.
@@turksandjerps thanks, I’m going to put the standard bed on my Marlin. Surprised they don’t offer the 79-82 Hilux body with the standard bed. Yours looks amazing and just confirmed that’s the right look for me
@@j.r4985 You're welcome. It will always be a mystery as to why they do the things they do.
Where did you get the cover for the bed?
RC4WD sells it
Hour estimate?
20-25 hours
I can’t even believe this via slipped from my views. Truly a demonstration in patience and effort. 🛻🪨⛰🌳🌲🐐
Thank you for watching