it was too expensive so I did it myself [fixing broken glass on a camper shell] I learned alot!

Installing plexiglass on your camper shell is a relatively simple process. Here's a step-by-step guide:
1. Measure the dimensions of the window openings on your camper shell. This will help you determine the size of the plexiglass sheets you'll need to purchase.
2. Purchase the correct size and thickness of plexiglass sheets from a local hardware store or online retailer. You may also want to consider getting UV-resistant plexiglass to prevent discoloration and damage from sunlight.
3. Clean the window openings on your camper shell thoroughly with a non-abrasive cleaner and a microfiber cloth. Remove any dirt, grime, or adhesive residue.
4. Use a marker or pencil to trace the outline of the window openings onto the plexiglass sheets. Be precise with your measurements to ensure a proper fit.
5. Use a cutting tool (such as a fine-toothed saw or a Dremel tool with a cutting attachment) to carefully cut along the marked lines on the plexiglass sheets. Take your time to make clean, straight cuts.
6. Once the plexiglass sheets are cut to the correct size, test fit them into the window openings. Make any necessary adjustments by sanding or trimming the edges of the plexiglass until it fits perfectly.
7. Apply a thin bead of silicone adhesive to the edges of the window openings on the camper shell.
8. Carefully place the plexiglass sheets into the window openings, pressing them firmly against the adhesive. Make sure they are centered and level.
9. Allow the silicone adhesive to dry and cure completely according to the manufacturer's instructions. This typically takes at least 24 hours.
To install locks on your camper shell, follow these steps:
1. Choose a suitable lock mechanism for your camper shell. There are various options available, such as key locks, combination locks, or electronic locks. Consider your specific needs and preferences when making your selection.
2. Identify the locations where you want to install the locks on your camper shell. This may include the doors, windows, or any other access points.
3. Use a marker or pencil to mark the screw hole locations for the lock mechanism on your camper shell. Make sure the marks are accurate and level.
4. Drill pilot holes at the marked locations using an appropriately sized drill bit. This will prevent the shell from cracking or splitting when you install the screws.
5. Attach the lock mechanism to the camper shell using screws and a screwdriver or drill-driver. Make sure the lock is securely fastened and aligned properly.
6. Test the lock to ensure it functions correctly. Make any necessary adjustments, such as tightening screws or lubricating the lock mechanism.
7. Repeat the process for any additional locks you want to install on your camper shell.
By following these steps, you should be able to successfully install plexiglass windows and locks on your camper shell. However, if you're unsure or uncomfortable with the process, it's always a good idea to consult a professional or seek assistance from an experienced DIYer.