VAUXHALL/OPEL CORSA 1.3 CDTI NO Start

Sdílet
Vložit

Komentáře • 51

  • @riho221
    @riho221 Před 5 lety

    Thanks for the video, MAF sensor tip helped me get a non starter engine running

  • @colinwilson1585
    @colinwilson1585 Před 6 lety +3

    Some very good info in this video, cheers. I'm sure a lot of people will find it useful as this engine is used in a lot of Vauxhalls and Fiat's.

  • @davesterl
    @davesterl Před 6 lety

    Gr8 vid sandy

  • @sierra1s953
    @sierra1s953 Před 5 lety

    hi nice video for me astra h z13dth for not starting the problem was a stuck open egr..is one more reason for car not start up..at the end i had to hammer the egr for car to start!!!

  • @v4vauxhall498
    @v4vauxhall498 Před 6 lety +1

    Hi Sandy you may find this will come back to you, the symptoms described are absolutelyclassic of a failing ecu.regards Joe

    • @sandyande
      @sandyande  Před 6 lety +1

      V4VAUXHALL hi Joe I think u maybe right the guy called last night to say he had difficulty restarting it but it eventually caught after 10 tries!!! May he should consider selling to webuyanycar! Cheers sandy

  • @suryagrg20
    @suryagrg20 Před 4 lety

    Nice video , Can you make the video, how to change the egr valve or cleaning ?

  • @rossrossallan4339
    @rossrossallan4339 Před 2 lety

    New subscriber from sunny Glasgow

    • @sandyande
      @sandyande  Před 2 lety

      Welcome Ross it's sunny in Falkirk too😃

  • @davidelliott5843
    @davidelliott5843 Před rokem

    I have a Fiat Panda with the same engine it was clogged almost solid with soot. Excessive EGR flow and gentle driving are the culprit.
    By the way. Cam chains last 100,000 miles and will be broken by 120,000. They almost never rattle. It’s a service item.

  • @fahemabdelmalek5655
    @fahemabdelmalek5655 Před 5 lety

    Thank you ,these are very helpful technical informations.but you should use an oscilloscope to check injectors signal,crank sensor signal befor you jump to ECU.good luck

    • @sandyande
      @sandyande  Před 5 lety

      Good advice my friend ps where are u from? cheers sandy

  • @tonyireland1434
    @tonyireland1434 Před 3 lety

    do you have a video for the vacuum pump thankyou

  • @tonyireland1434
    @tonyireland1434 Před 3 lety

    thankyou sir i have an astra 1.3 cdti fantastic engine bullet proof but having a problem with brakes hard pedal brakes not great changed the servo no change any ideas ??? thanks

  • @Faz198
    @Faz198 Před 5 lety

    Got a 1.3cdti 2007 reg. Having issues with misfiring. Replaced the wiring looms to the injectors. The engine fan is constantly running even with a cold engine. Wondering if anyone could help me out? Cheers

    • @sandyande
      @sandyande  Před 5 lety

      Engine fan is running because it has detected misfire, what are your codes?

    • @Faz198
      @Faz198 Před 5 lety

      @@sandyande I will call my mechanic in the morning and ask him. Am I okay to get back to you with them later? Thanks for replying!

  • @geraldobesikou5028
    @geraldobesikou5028 Před 4 lety

    Ηi,I have the same car..I went for shopping and after i finished i went to start the car and it didnt.Is there a tip ?

    • @sandyande
      @sandyande  Před 4 lety

      czcams.com/video/5SMc4DblF8w/video.html

  • @ballsack4321
    @ballsack4321 Před 4 lety

    Thank you mate.

  • @exile6223
    @exile6223 Před 9 měsíci

    Where is the starter on this specific car

  • @danyel1590
    @danyel1590 Před 2 lety

    Hello .what tipe of opcom,you used?what version?

  • @neildean7515
    @neildean7515 Před rokem

    Blocked EGR, DPF & dirty MAF on my 1.7 CdTi are comman after 50k, needs constant cleaning for a damn good run to clean the carbon. Also, not a good sign..”never cleaned the filter” i wonder what else has not been done. Bad EGR & DPF can contaminate oil, adding poor reliability. Also Diesels hate slow runs, they just carbon up, hence need regular servicing!!!!

  • @ryanmochrie1
    @ryanmochrie1 Před 5 lety +1

    Mine is doing the exact same will start first thing then if I go 2 minutes down the road won't start again but after that it will be fine the rest of the day changed the diesel filter still doing it annoying the life out me

    • @sandyande
      @sandyande  Před 5 lety

      Hello my friend this car still does this on occasion, best to connect a cheap scan tool and see if u can still access live data when it's a no start cheers sandy

    • @ryanmochrie1
      @ryanmochrie1 Před 5 lety

      @@sandyande going into the garage tomorrow doing my head in

    • @ryanmochrie1
      @ryanmochrie1 Před 5 lety +1

      @@sandyande it's so annoying too cause starts for turn off the key in the morning if I turn it off 2 seconds later won't start again but if I start it first thing and run it for a good 8-10 miles journey it's fine

    • @sandyande
      @sandyande  Před 5 lety

      @@ryanmochrie1 let me know how u get on cheers sandy

    • @ryanmochrie1
      @ryanmochrie1 Před 5 lety +1

      @@sandyande went into the garage was starting fine cause it had been ran so he said to leave it overnight with him and he will check it tomorrow but it never flags up a engine managment light so going to be hard to diagnose I think 😥

  • @DannyC509
    @DannyC509 Před 4 lety

    O have the same problem can't locate petrol fuel filter on a 2012 1.0 cprsa d can you help

    • @sandyande
      @sandyande  Před 4 lety

      Probably doesn't have one because the government says they emit to much hydrocarbons during filter change cheers sandy

    • @DannyC509
      @DannyC509 Před 4 lety

      @@sandyande thanks you've confirmed what I suspected. I be an engine cranks but no start tried spraying easy start but it didn't start. Any suggestions? Checked fuses they're ok so drawing a blank npw

    • @sandyande
      @sandyande  Před 4 lety

      @@DannyC509 is there a rpm signal, any codes? Spanner light flashing?

    • @DannyC509
      @DannyC509 Před 4 lety

      No no spanner flashing

    • @DannyC509
      @DannyC509 Před 4 lety

      No codes either

  • @gazjacko6695
    @gazjacko6695 Před 3 lety

    Hi could you have a look at my video please corsa CDTI running problem iv changed throttle flap is working fine Ecu ,fuel pump injectors , rail sensor ,crank sensor ,rail sensor ,egr working fine fuel pressure is fine op com no fault codes starts runs the cuts out
    Restarts fine then same symptoms
    Any help would be highly appreciated

    • @sandyande
      @sandyande  Před 3 lety

      czcams.com/video/5SMc4DblF8w/video.html

    • @gazjacko6695
      @gazjacko6695 Před 3 lety

      Hi thanks throttle valve is fine

    • @sandyande
      @sandyande  Před 3 lety

      Where is link to your video?

    • @gazjacko6695
      @gazjacko6695 Před 3 lety

      Hi I you just go on my channel the video should come up thanks

    • @gazjacko6695
      @gazjacko6695 Před 3 lety

      Think you just press on the g on this reply really
      Appreciated

  • @khansafi2345
    @khansafi2345 Před 2 lety

    So