Building a PC in the ULTIMATE Case Step by Step
Vložit
- čas přidán 15. 06. 2024
- In this video, we show Building a PC in the HYTE Y60 Case, a Complete Beginners Step by Step Guide. This How to PC Building guide is a bit different, because of how different the Y60 is, scary.
WATCH NEXT: How to cable manage inside the HYTE Y60: • Wiring a Gaming PC in ...
0:00 Introducing on How to Build a PC inside the HYTE Y60 Mid-Tower Gaming Case
1:00 How to Install the AMD Ryzen 9 5900X Processor on the X570S AORUS MASTER motherboard
2:35 How to properly install 32Gigs of Thermaltake ToughRAM RGB 4000Mhz
5:34 How to install the Sabrent Rocket M.2 2TB M.2 SSD - How to install an M.2 SSD
6:59 How to install the Arctic Liquid Freezer II 280 Water cooling Unit
15:04 Prepping the case to install the X570S AORUS MASTER Motherboard
16:35 Moving the PCIE 4.0 Riser Card from the HYTE Y60 to install a motherboard
18:21 How to install the X570S AORUS MASTER Motherboard
21:53 Installing the Radiator of the Arctic Liquid Freezer II 280 in the HYTE Y60 Case
24:16 How to install the EVGA GeForce RTX 3080 Ti FTW3 ULTRA GAMING Vertically mounted
26:22 How to install an SSD in the HTE Y60 Chassis
28:23 Discussing how we built the system into the HYTE Y60 Chassis, next up cable management
🔥 Check out my full build on my Amazon affiliate links
• HYTE Y60 Mid-Tower Case CS-HYTE-Y60-BW: geni.us/3btpBI0
• AMD Ryzen 9 5900X Processor: geni.us/RFOT8
• X570S AORUS MASTER Motherboard: geni.us/UBeOAB
• ARCTIC Liquid Freezer II 280 A-RGB Liquid Cooling Unit: geni.us/pzy2
• EVGA GeForce RTX 3080 Ti FTW3 Ultra Gaming 12G-P5-3967-KR: geni.us/8194
• Thermaltake TOUGHRAM RGB DDR4 4000MHz 16GB x 2: geni.us/eNhKNph
• Sabrent 1TB Rocket 4 Plus NVMe 4.0 Gen4 PCIe M.2: geni.us/fE01
• WD Blue 500Gig SSD: geni.us/gyDyb0U
• EVGA SuperNOVA 1000 G+ 80 Plus Gold 1000W: geni.us/IVoE
Anytime we have a new PC build, it can be scary, PC Builds are very scary but I hope this video on a Y60 build helps. This is a HYTE Y60 water cooled build, a PC Build Guide, a HYTE Y60 Build.
🔔 SUBSCRIBE FOR MORE VIDEOS
czcams.com/users/thisbytesforyou?s...
✅ I use Tubebuddy and Morning Fame to optimize my channel and you can too,
✅ TubeBuddy - (FREE VERSION): www.Tubebuddy.com/ThisBytesFo...
✅ Morning Fame - (1 MONTH FREE TRIAL): morningfa.me/invite/giomvqhb
🔥 Like what I do, you can make a single donation here: www.buymeacoffee.com/ThisByte...
If you would like to purchase something through the Affiliated Amazon Store for ThisBytesForYou, use the link below. Using this link will help the channel grow to bring you more.
✅ Here is Global Amazon Affiliate link: geni.us/APnY buy from our link and help our channel. Don't worry, it wont make anything cost extra, regular prices are there.
✅ Don't forget to check out and follow my other social media channels:
🔥 Buy Me a Cup of Coffee: www.buymeacoffee.com/ThisByte...
🔥 Facebook: / thisbytesforyou
🔥 Twitter: / thisbytesforyou
🔥 Reddit: / thisbytesforyou
🔥 Instagram: / thisbytesforyou
🔥 Tumblr: www.tumblr.com/blog/thisbytes...
🔥 Pinterest: / thisbytesforyou
🔥 LinkedIn: / thisbytesforyou
this bites for you
@hyte4441
@AORUS
@ARCTIChannel
#TeamEVGA
#ThisBytesForYou
#AMD
As an Amazon Associate, I earn from qualifying purchases.
~-~~-~~~-~~-~
Please watch: "Your Gaming Chair and Floors NEED These!"
• Change your wheels quick!
~-~~-~~~-~~-~
#Sponsored - Jak na to + styl
✅ WATCH NEXT: How to cable manage inside the HYTE Y60: czcams.com/video/FM7FURuXLbg/video.html
In this video, we show Building a PC in the HYTE Y60 Case, a Complete Beginners Step by Step Guide. This How to PC Building guide is a little different, because of how different the Y60 is, scary.
✅ Buy the HYTE Y60 Case on my Amazon Affiliate link: geni.us/3btpBI0
Just about to start my own Hyte Y60 build. I can only echo what other have said: this is one of the best technical communication / tutorial / instruction videos for computer installations I’ve ever seen. Your attention to detail and clear, un-rushed presentation style is extremely effective and non-intimidating for people of all experience levels.
Great stuff and really looking forward to my own build now. Thank you!
Wow, awesome my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Your kind words really do mean a ton me, a great way to start the day.
I will have to saw, I did do one thing backward, I didn't think this part out more carefully, but thankfully we connected so I can let you know. The fans on the liquid cooling unit, make sure they are blowing into the case, not sucking out. The case needs cooling, the fans on the top on the bottom and rear are not enough to help cool the gpu, so I highly recommend to flip the fans..
It is always my pleasure my friend, if you don't mind me asking, what are your components?
the most amazing thing about this build is it is the first pc in history to not require a PSU. great job my man!
Haha that's the next video since it's the Medusa of cables, you can find a link to it in the description happy you enjoyed it my friend.
I have been in IT for 37 years (Apple II days), and building computers for 30 years. This video is the most in depth I’ve seen. I think people who are intimidated by the process, should definitely watch it. Good job.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
*WATCH NEXT* : WATCH NEXT: How to cable manage inside the HYTE Y60: czcams.com/video/FM7FURuXLbg/video.html
In this video, we show Building a PC in the HYTE Y60 Case, a Complete Beginners Step by Step Guide. This How to PC Building guide is a little different, because of how different the Y60 is, scary.
Buy it today on my Amazon Affiliate link: geni.us/3btpBI0
I like how you explain the details for the people who don't know how to build a PC.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. I have a ton more on here, so please do check them out and if you dont see something you would like made, and it makes sense, I might be able to make it.
Such a easy to follow tutorial.
Excellent, in terms of user experience! The next episode should be excellent as well.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Your kind words really do mean a ton me, a great way to start the day.
I never paid attention to the numbers on RAM sticks before. Thank you for that, I'll be doing that from now on whenever I use 4 sticks in a system.
Just wait till you see next Mondays video... Goes to prove updating BIOS' is sooooo important and memory too. Always a pleasure my friend, so very happy you enjoyed this video and thanks for your support
If you have 4 of the same ram it doesn’t matter what spot you plug them into
@@itz_snackz6371 that is not always true, I expanded more into that in this video, czcams.com/video/xqWfeOsTto8/video.html, you can believe what you like but as a Product Development engineer for Alienware and Velocity Micro, I have installed Millions of sticks of RAM, on thousands of motherboards, I can't tell you, it does make a difference.
Thanks Iggy, I really like the step by step instructions. As you know, I'm getting ready to build a pc using the Hyte Y70, so watching this is good prep for me. Very similar cases. I'll be watching the wiring video next!
Just make sure to reverse the fans in the liquid cooling unit, to blow into the case, you will get better cooling that way.
Great video as always ,you add the little details that have helped me so much in other builds. I just upgraded to this cpu last week I will never need all the cores but the deal was just too good.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Thats so much for those kind words, I just had some idiot actually state that this video offered no information, and I know that I go over a ton of info, a ton more that mostly all others do that just quickly gleam over the the smaller stuff ONLY focusing on the bigger stuff, so I am so happy you enjoyed it.
Best step by step beginner guide on CZcams. Build my first PC same case and all. Thanks.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. It really does mean a ton to me, thank you.
Thank you so much!! the time you take with each step and explaining it throughly made it so easy to understand, I’m thinking of getting this as my first pc.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
your videos are great. You explain everything and you do it in a clear and mellow voice. Everything is so clear and simple to understand. Thank you.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. You've already started my day off on the right foot, thank you so much. The follow up video for this one comes out at 9AM EST today, stay tuned my friend.
Good stuff brother. Enjoy watching your videos and absorbing your great training skills.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you and I hope I will see you around on more videos to help you out some more in future videos, you will see a few more on this case here.
You must have built hundreds and hundreds of computers.
I love how nicely everything fits together.
I love how everything fits together so nicely.
Keep up the good work.
You truly are one of the best I've ever seen.
The way you explain and show everything in detail.
Keith
thousands actually, I had to help during retail machines as well haha. Thanks bud, so happy you enjoyed it.
@@ThisBytesForYou
I believe it
Thousands of computers.
But anyway
It was surprising to hear what you said about the Apple batteries.
No. Shit
Every time I plug that into my computer by way of USB
It gets drained.
But anyway it's all charged up again and it'll last me for days and days.
Keith
Hi! Late to the party but would like to just say that I LOVE how you do tutorials. Clear & Thorough. I just subbed, looking forward to your next videos for my inspiration in building my first gaming PC :D
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Really love your multi-camera view when inserting cards, cpu, memory sticks etc. amazing. Haven’t see anyone else do this creatively.
thank you so much my friend, I really do love what I do and I am so happy it shows ;)
I love your videos your one of my favorite tech CZcamsr it awesome how detailed your videos are which helped me build my frist pc and flash the bios and I was able to setup the drivers all because of how detailed your videos are thank you so much
Awesome my friend, always a pleasure, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
I'm so afraid trying to build on my own but with this I think I can do it. Thank you!
I'm here for you bud, no worries, I have plenty of build guides to help you, in this case too but if you have any questions, please do ask, but I am going to bed right now haha
Thank u for the great content!! Keep it up!! As always ur a lot of help in the community
Thank you Armando, so much for your kind words my friend, they mean the world to me and I am so very happy you enjoyed this video.
Thank you for this awesome build guide I’m going to be building a y60 hyte shortly this will be a perfect guide for me as for my first pc build 💯
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. I did mess up though, I put the side fans blowing out, make sure they are blowing in.
I'm so glad I found a video with a case I want to get, I got a Evga 3080ti for my birthday, I was concerned at 1st about using the 3080ti on this case but with you're video I'm fully convinced I can build my new pc thank you for this video. Imma sub now
so, the way I put the fans for the liquid cooling unit, you should reverse since the video card in this case gets real hot, have the fans sucking air in, I should have done that. There is a chance you will need to keep the side panel off when you play, the temps got to 88 QUICK, i didn't let them get higher but of course they can. As a reviewer I have to quickly review products people send me to review, since this was something I bought, I had to quickly cycle out of it, I hope to get back to it soon but I hope I have helped you and thanks so much for your support, it means the world to me.
Best video i have seen by far.
Well awesome my friend, always a pleasure, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. I did however mess up on the fans on the side, they should be intake and not exhaust.
Excellent assembly
thank you so much my friend, so very happy you enjoyed it.
I actually bought some new ram recently and I actually never knew that they were number on where to put them good explanation 👏
Yeah, many don't know this and actually I have never seen anyone teach it, I have had memory F.A.E's show this to me. Thanks so much for your kind words as well
Awesomely informative video as always! I like there is this part 1 and part 2 to come. Your video's were especially helpful and confidence building when as a newbie I installed RTX 3060 into my new build, and here I am now with my ultimate goal of now having the RTX3080TI FTW3 ULTRA and EVGA P6 1000W power supply on their in hand tomorrow. So this is great timing for the install and wiring. I thought my choice of power supply was a little over kill but future proofing (if that's possible! plus it helped being on sale) so was all smiles when I saw your 1000w choice.
yeah, I always go for more than I need, it will only use what it needs and it keeps you safe for the foreseeable future, good stuff my friend, so very happy I could help you and that you enjoy my videos, it means the world to me.
@@ThisBytesForYou Believe me, I wouldn't have the confidence to have done what I have computer wise without them. I especially like that I can watch the whole video first, I can then set my tablet to the side and walk through each step and pause step by step. (only down side is people think I'm at tech wiz and keep asking me for advice rofl)👍
@@takata98 well awesome my friend, thats actually why I make them the way I do, I don't skip over things, and I dont speak overly tech, because humans don't talk like that, we speak in human words so I try to give a ton of detail without scaring people away and show everything, which most love, though some do hate, because they feel its above them, oh well, as long as I can help you, I am happy. Thank you so much for your kind words my friend ;)
Thanks for the upload your videos are always helpful with lots of useful information.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
@@ThisBytesForYou: I'll buy you a cup of coffee as well, thank you very much once again.
oh wow, thank you so much my friend, I truly appreciate it and it is completely my pleasure.
You saved me so much time thanks
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Excellent guide 👍
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Good build all the parts fit perfectly in the case
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
@@ThisBytesForYou Yeah of course
thanks bud
Built my Pc thank you for the tips!
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. This is the very reason I made this channel and I am so very happy I could help you.
Thanks for this vid.Installing sata SSD and didn't know wher eit would go but big dummy moment tbh lol but yeah.I love this case man
Yeah it is a nice case, I will have the little sister up too, stay tuned and always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
This is one big build! 👍🏼
thanks bud, and it really is an awesome build too, the case is amazing.
Thanks for be the best i love your videos
Thank you so much for your kind words my friend, they mean the world to me and I am so very happy you enjoyed this video.
Ok lots of blurry shots and dusty parts but the most in depth tutorial I've seen without being bloated (cough cough LTT) great job man.
Thanks, though a lot of bobbing and weaving to get into the good comments haha, I don't have the budget or man power LTT/GN/J2C have but I push ahead with what I can, thanks so much for catching that, I do appreciate it always working hard to improve.
That case looks a beast mate 👍🏼 too much for me personally but i did enjoy the video 🤟🏼
thanks bud, so very happy you enjoyed it. I didn't know what to expect but I fell in love with it. Just wait for next weeks video, the cable management video, you will be blown away how nice it is. Currently editing it.
That’s an awesome hack with the double SSD per tray install nice to know
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Yeah the manual is VERY basic, and they don't give you a lot of info, but I am so happy i could help you. You may want to check out the wiring guide, it might help you too
does anyone know any motherboard with similar conections options but in white?
hi, lovely guide. im planning to build my first pc entry/mid level with this case in mind. but most build i saw are just high end specs obviously. so i wonder if it would look ok if a dual fan gpu would look great in this large case? if not please recommend some with triple fan. sorry if this question kinda sounds dumb lol
Yes, it will look great, but actually, I dont recommend this case. The way I built it, also, I messed up on the side fans, I should have had it blowing in, it would have been cooler, since I don't overclock. The case is really nice, yes, but you may be a little limited when upgrading.
Nice build, I'm about to build my 2nd pc. Using a lian LI 011 xl case with the sl120 fans and an Asus z690e wifi MB with Corsair dominator ddr5 5200mhz ram and a 12900k and a ftw3 3080 ti. I have an nzxt kraken Z73 360 aio, do you think this aio will cool the 12900k cpu fine?? I have read others using the z73 with good results so it leads me to believe it will work well. Great build, thanks for sharing.
well, I can't truthfully say, since I have never reviewed it, but it should be good, the 360's are the best in my opinion. I would have used a 360 here, but I prefer it on the side, I feel like it looks so much nicer on the side. Just wait till next weeks video when you see this in action.
Nice build, you think the bottom airflow is sufficient? Im going with a 6950xt in mine. So i am definitely putting in 2x 140mm's.
thanks bud, I have a huge work load unfortunately that I am trying to work through so I have not been able to get to testing in this, but I have heard 1 person tell me that his 3080ti overheated in this case, but of course, you never know how good or bad someone's knowledge level is, ambient temperature and so many other aspects. I assume it should be, I would saw with some side air pumping in as well.
Great video. Any reason you changed the orientation of the 280 rad from top to the bottom pick-ups? Is that too avoid cavitation?
yes, because the hoses would be too high, now mind you, I would normally put the liquid cooling unit at the top, but I did it on the side for this build because it looks nicer.
@@ThisBytesForYou Thanks for the response. And again, kudos on your great content. 👍
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Thanks as well so much for your kind words and support.
Hi, great video. Did your case originally come with 3 LED fans (rear and where your AIO is now) and you changed the rear fan to non LED?
Also do you feel the AIO does a better job of cooling when it's on the side vs at the top? Thanks!
Thanks bud, this video can answer all of your questions: czcams.com/video/OhkzeyfwKX8/video.html. As for the side vs the top, the top will take a larger one, BUT I prefer the look of seeing the RGB and all on the side. A few things have come up, so I could not get the BIOS flashing and windows install and such video done, but I will get back to it soon I hope.
@@ThisBytesForYou Watched the video and got my answer. Mine came with three LED fans with each having a 6 pin connector. A fan adapter was also included in the parts box. I am not a fan of RGB because it seems too distracting so I plan to go with an AIO at the top and plan to remove the 3 RGB fans. Thanks again for the great videos.
WHAT, that is insane, I would have preferred the RGB fans, maybe not so much for myself but for my viewers, but just know you can disable the RGB and always a pleasure my friend.
I enjoyed your video very well done. Do you know by chance if the ARCTIC Liquid Freezer II 360 can fit on top of the Y60 Case?
Thanks so much my friend, so happy you enjoyed it. Yes, it will support a 360mm up to 30mm thick but the reason I did not is it looks much sexier on the side. Typically for my own PC, I dont care about sexy, but I had to make it youtube sexy, you know what I mean ;)
Exactly I get it, the 360 is 38mm thick but the Y60 can fit up to 30mm im just wondering if I can somehow make it still fit anyways?
@@abstractpepe4349 I haven't tried yet, maybe one day, I have so much on my plate
@@ThisBytesForYou No worries. Thank you for your quick replies .
@@abstractpepe4349 Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Hi, can you build one for less then 1500 with that case? Thanks. I I’m building one in November.
you can, but the process would be the same
Another question: You are able to have the radiator tubes at the bottom due to where the pump resides? Thanks!
you can see it in the screenshot and in the video, for sure.
So I have a audio card and it won’t fit into the case pc it has a full sized pcie cover while the case only has a half size one under the “expansion” portion of the case idk what to do now
Correct, it will not fit.
Do you think a Corsair icue H100i elite lcd would work better or worse than the Arctic II 280 for this build?
Not sure, I have not reviewed it, but I have used the H150 and the Arctic II 280 was better
I’m trying to build this but unfortunate the liquid cooler is out of stock.. can you suggest alternate cooler..
WEll, you could buy a 360, which I would recommend, to go at the top from my Amazon Affilaite: geni.us/acJwlQ that I used in this video on the Y40: czcams.com/video/fLwNQv7Ja-g/video.html
Thinking of changing to this case but is it really fine to mount a triple slot 3080 strix in this case? GN advised against this because clearance issues but I really like this case.
Clearance issues and the fact that the card will run soooooooooooooo hot, virtually mounted GPU's are starved for air since they are so close to the glass.
@@ThisBytesForYou that a no?
@@HauNguyen-bo8zu I thought my warning explained no, but that is a big no recommendation. Not to say that it wont work, but I don't recommend it.
Was looking forward to this. What do you think compared to Lian Li Evolved?
Sadly, Lian Li has never reached back out to me on any sort of reviewing opportunity, though I reached out to them when I was newer, I will reach out to them once I am a little more above water without a backlog.
@@ThisBytesForYou sounds good. Not a problem.
Looking forward to seeing this finished. I’d like to build something with close to the same components but with either a amd 6900xt or a 3070 ti-I just don’t want to spend what a 3080 ti cost. I’m going into a lg ultragear 32” @165hz. Just wondering what I can expect performance wise from either of those graphic cards? Am I going to have too much for my monitor? Total noob so I need some help
still fixing issues daily with people with AMD, so I would kind of hate to stear you the wrong way, but as long as you have newer hardware you should be OK and make sure to use HDMI 2.1 cables or DP 1.4 cables, always use the latest standard cable. 165hz, thats a nice monitor, I would recommend the 3080ti though. 6900Xt should be on par with the 3080, match it, beat it and sometimes get beat by it but with newer cards coming out in september, it might be wise to wait a little longer, it will also allow you to save even more money and get a better card.
@@ThisBytesForYou This will be my first pc and I just don’t want to make the wrong choice and that’s why I was leaning more towards a 3070 ti knowing that I could upgrade eventually to maybe even a 3090 when newer cards come out.
@@ThisBytesForYou Also do you have a case you like that makes managing cables easier? I really love the aquarium look of the hyte 60 and the similar Lian Li cases but I also want something that makes it easier to build with plenty of space.
@@Chill-Im-OldAF This case for sure, wait for my video on Monday where I do the cable management. I don't do everything in 1 video because it would make the video 2 hours long, who would watch that. My videos by far show more detail than any other video, but I do it to help everyone 100%. Trust me, this has plenty of space, more then the 011 did, I made a build video with that as well and cable management is AMAZING in this case.
did you manage to get that 3080 working with the riser and pcie gen 4? i got this case and either the riser is faulty or that card simply doesn’t seat properly, because it refuses to work for me. i need to try setting the slot to gen 3 but that entirely defeats the purpose of a gen 4 riser.
No ,not yet, since I bought the case, it has to take a back seat to things companies send me, but I will get back to this. I am assuming your cable is bad, or maybe improperly seated in the PCIE slots, and of course the video card, be sure to check both ends, the way you seat it in this case is very awkward. I will get back to it, but it will take me some time. Also, its a Gen4 cable, you should not need to touch Gen3.
that case looks very nice! i have always wanted to set my 3080TI like the one youu have verticaly but i am afraid that i will sofocate it . i do have the same gpu and the same case you have in the background the corsair 5000D airflow, once again . amazing video !!
I don't recommend vertically mounted gpus, they get hotter, check out my latest video on cooling and it will help tons
Thank you so much for your, kind words my friend, it means a ton to me and so very happy you enjoyed the video.
@@ThisBytesForYou will do thank you!! for letting me know!! i always prefer performance over cosmetics as well :D
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
I have a question! Was that a 1TB SSD on top of the Blue SATA SSD and is that required or just added storage?
no, you only need 1 drive, mechanical or SSD, just one drive (though I recommend an M.2 SSD over a regular SSD or mechanical drive)
Hey I finish the build a few weeks ago, it looks beautiful lol. Would love to show it to you, do you have a way for me to send you pictures of the build ? And Thanks for all your help!
Hey bud, seeing you again, so happy you got it built. Yeah, I'd love to see it, you can email me at iggy@thisbytesforyou.com
Your AIO CPU cooler is blowing air out or in? I am doing a HYTE build right now, and the AIO is kind of confusing with regards to airflow. I planned to use the side to pull air in and top fans to blow it out.
I had it exhausting, sadly this case doesn't do so well in airflow I have recently found, and actually have heard from others, my gpu is usually 81°C, thats way too high, but that was with the fans exhausting on the liquids cooling unit. I highly recommend putting the AIO on the top and having fans on the side blowing air in.
Do you know if this case will work with the sapphire rx 7900xtx graphics card cant find any videos with it
the case can take gpus up to 375mm, the Sapphire is 320mm, you are good.
@@ThisBytesForYou was so close lol less than a inch from the glass with the sapphire
@@zombielovesgaming9971 an inch... you should have had much more room.
@@ThisBytesForYou had to take all the gaurds off the back it was every bit of it. Taking it the graphics card i got is alil more thicker
yeah, the y60 isn't the greatest on thick cards, they Y40 was much better at that, check it out: czcams.com/video/JqvXib6ugjw/video.html
Now that you've built in it, what are your thoughts after 9 months, what was your favorite case to build in and where does this rank?
The build was nice, though I should have reveresed the airflow on the radiator, instead of fans sucking air out, they should have sucked in. They still need a little more space between the glass and the card, but lets see what Y40 does, its in the queue
Installed a quad kit of ram twice and never paid attention to those numbers. Will it matter with quad kits as well?
Yes
Is this the same process when swapping cases too?
Yup
Please confirm with me that the copper plate is suppose to make contact with CPU along with paste because I'm looking now that it has a noticeable gap with no contact of CPU with Copper plating of the cooler.
Is this normal?
yes, 100% the copper needs to make contact with the cpu, the only way it will cool it. What is your motherboard manufacturer and model number and your liquid cooling manufacturer and model number?
@@ThisBytesForYou yeah... mine is not making contact at all. It has about an inch or so gap. I contacted Arcticz a couple days ago about this issue and learned they need to ship me a backplate for the AM4 which is not included in my box.
They're hardware includes hardware for Intel with their backplate, but includes hardware for AM4, but no backplate. If that makes sense.
Should be arriving by today so I can use the smaller standoffs than the plastic spacers and hope it does touch with no gaps....
ahhh that makes sense, but I do go over that in this video, I should have confirmed if you watched this video as that would have helped you. Regardless, happy Arctic could help.
Can you fit a e-atx in hyte y60
I got you my friend, this will have all your answers and then some : czcams.com/video/OhkzeyfwKX8/video.html
Excellent tutorial - well filmed, very clear and informative. One piece of speaking advice: I have found in my writing my brain will fixate on one particular word or phrase and keep repeating it without my noticing until later when I edit. I notice you have a verbal tic where you use the phrase "go ahead" or "went ahead" very frequently. Not a horrible thing by any means, but you might want to listen for yourself and perhaps watch for it in the future to minimize the repetition.
Thanks bud, I do appreciate it... actually, I have MANY more hahah, I just edit them out, my big one is "OK" and one other, can't think of it no... I didn't realize go ahead and went ahead, uggg, now another one hahah, thank you, I will look out for that.
Yeah brudder you rock!
Hahah, thanks brudder, Always a pleasure, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Damn that was fast hahah. Ok, ok, maybe I can still catch you. I just bought the CyberpowerPC prebuilt off Newegg -- and damned if they don't include info that will tell me what the Power Supply wattage is . No Bloody Manual. So without unscrewing the damn PSU and pulling it out so I can see the wattage, is there any way you can suggest for me to do it with a free/cheap utlity you know of? Thank for your entertaining and knowledgeable delivery in this Hobby of Love~ 🙂@@ThisBytesForYou
I am always creating and editing videos, upsets my wife, but meh hahah and with I always try to reply, unless I am at my day job. Sadly, there is no way to tell unless you take it out, or you call Cyberpower and give them your invoice number, they might be able to tell you, i have reviewed them before, they make decent systems, good stuff my friend.
Thanks again for the quick reply. Well damn...I know why they can't list the name brands of all their components on the sales web pages, but surely they should drop a component sheet into each box -- am I right? Anyway, I love this box so far, and the rest of the components are above average quality. This Hyte Y60 case is just gorgeous, and now...I head into the sublime bliss of installing all my sheeyat, and transfering my Steam Library from another SSD (which is how I found you -- the SSD install hahah). Thanks again for the help, and stand by for a "Coffee" from me. Cheers Brudda!~~~@@ThisBytesForYou
Thanks so much for your kind words and support my friend, it means the world to me, and you can see all the components in the description and most of them in the youtube link thing, i think I have to make sure i set it and thanks so much for the coffee, it means the world to me, since i am small, i have to buy everything so i am working hard to get a super and build a newer system for you guys. Thanks agian my friend.
I have pretty much the exact same build but an icue 100 cooler. It ran hot so i added 3 Exhuast fans on the top to try and help. GPU hits 75 to 80 on VALORANT. cpu gets toasty too. Apex just gets them both way too hot. Any tips to improve airflow. ( i have changed speeds set them all too balanced, lmk if thats a bad one.)
what do you have the side fans doing, exhaust or intake?
@@ThisBytesForYou side fans are intake pulling air in. Top are exhaust
@@chasefoster9651 sadly, I hit much the same, temps are not the greatest in this case, if your running a 3080, see if this help: czcams.com/video/C-A-_OPLygM/video.html
@@ThisBytesForYou ty
So I've adjusted a few things and the biggest one was taking the front glass off while I play. Dropped it to 73!
Hello what is the diff of g+ to gt evga psu?
The GT has longer cables, the G+ has 2 Foud Pin Peripheral cable strands, and the GT is 1mm taller,
Is gt ok for hyte y60? Thanks sir.. much appreciated
yes for sure
Am I able to fit a Z590 motherboard in this? I need to know before buying
A z590 board is a motherboard running a Z590 chipset. What you need to know, is what form factor your motherboard is, ATX, E-ATX, I-TX, Micro-ATX, Mini-ITX... And we'll yes it will fit them all.
It fits thank you!
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
@@ThisBytesForYou I am enjoying your videos they are very helpful, and I go to your channel when I need to figure something out. Your reviews are entertaining and informative and you have helped me lots with pc building over the years, looking forward to future videos.
@@garrenspaziani6381 Awesome my friend, thank you so much. Now that you have this case, tomorrow, I will have the Wiring guide, where I show you from the bottom to the top how to cable this machine PERFECT, well, perfectly in my opinion, so if you have not cabled it yet, I hope that will help. I have sooooooooooo many other reviews in the works, I hope to catch you on the next one. Thanks again my friend, i truly appreciate your kind words.
Question will an asus ac1900 wifi card fit behind the gpu?
@thisbytesforyou
I can't say, not sure what card that is, Google searching asus 1900x wifi card brings up nothing.... Behind the board.., where would the card connect and what's up with the attitude?
@@ThisBytesForYou sorry, the ac1900 its a little red pcie wifi card. Not behind the motherboard, I meant the vertical gpu
I need to check, just woke up
@@ThisBytesForYou currently my gpu is using one pcie on my mboard and blocking it the other. Want to use that wifi card with my starlink but won't invest in the case if it doesn't fit.
Why did u flip the intercooler? It was mounted correctly the first time.
and the second time, it was mounted correctly as well, cool how that works right?
@@ThisBytesForYou actually mounting the radiator lower than the pump will trap air in the outlets of the radiator reducing its lifespace, mounting the radiator higher than the pump will allow the air to travel better leading to better performance.
@@MaySpitfire close, but no, this was actually confirmed by Arctic (a conversation I had with them) and Jay from Jayz2Cents. Bubble will get stuck the top of the radiator, which is higher than the pump, bubbles go up, the inlets and outlets are at the bottom of the radiator. This is the best way to install it.
@@ThisBytesForYou fairly certain thats the opposite of the point he made, but speak your truth i guess
@@MaySpitfire thanks bud, check at 7:20: czcams.com/video/DKwA7ygTJn0/video.html
WD hard drive really?? Why not the samsung EVO?? Good episode!! 💯
Well, I had 3 of the EVO's laying around, but I just grabbed the WD, I mean, it works and its just for storage, but of course as you know, you can use any drive. Thanks so much for your kind words.
Also, a black SSD doesn't draw attention and is harder to see, a white and blue one is easier seen.
@@ThisBytesForYou Its called photoshop 😆
time is money, if I dont need to edit, I wont, thats nice a big need here for sure.
The sound of that motherboard sliding across the table 🫣
meh, it happens
I just want to ask you a question. Aren't the rad lines suppose to be higher then the cooler block lines. So that your AIO pump doesn't mess up down the road.
they should be level or lower, not higher regardless on that, I was a product development engineer for Alienware, then years later Dell, after they bought us and Velocity Micro, we worked hand in hand with all these AIO vendors, and they never mentioned level or lower, it all became something when Steve mentioned it, and still with that, little to no failures or high noises. mind you, like with anything man makes, issues happen, but no mass exctinctions of liquid cooling units,, but anyway, level or below and you are good. In case you doubt me, cuz who am I right, you can check out the preparation document on Arctic sites for this and all AIO's: support.arctic.de/lf2-280-argbr2
oh and that rules goes out the door if the unit is above the pump completely, like on the top of the case. The "issue" was that it made the pump fail, or causes noises, never happened to me in over 20+ years, and i have laterally worked with thousands.
@@ThisBytesForYou Thanks for getting back to me so quickly, that's great to know now. I saw some video's about this so called bad way to have your cooler setup. Now I know for my first PC build. I want to pull the trigger now. But these new gpus are coming out real soon. Thanks again for the info :)
@@ThisBytesForYou you just errand yourself a new sub :)
@@smokethatgameb9937 no worries my friend, you either saw Jay's video or Steve, or any of the copy cats. Steve's video was distorted because people didn't watch all of the video, and all of the videos, they only watched to the portion where they could roam around the internet, without any knowledge and tell everyone they are wrong, they are absolutely wrong, even though the minions had no idea of what they were talking about, or ever experienced it. Jay cleared it up some, but still people will only see/hear what they want. It is best to have it level or below, unless the unit is at the top of the case, Steve and Jays videos are not wrong, but its not an issue that will appear in a week, month year, maybe not even within the 3 to 5 years of warranty Arctic has, maybe even beyond it, regardless, most peopel won't keep the unit for long anyway, since sockets change often.
This may be a stupid question but will a 3080 Ti Ultra 10GB ruin this whole build?
Not a stupid question at all, and no, I dont think it will at all, it's rare for games to get to 16, not including RTX maybe, 12, you are getting close, 10 even closer, but you will hit the wall many times, IF you are using RTX, maybe at 4K with all the eye candy, at 2K you would be fine.
@@ThisBytesForYou Appreciate it! 🤙🏾
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.@@BUXUH
How much would this build be in total?
Would be impossible for me to tell you, with shipping costs, taxes and the likes that are local to me, and not to you, but luckily for you i have full Global Amazon Affiliate links in the description so you can mix and match as you like and calculate your true cost.
@@ThisBytesForYou thank you ⊂(・▽・⊂)
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you. Let me know if you have any further questions.@@sh0rtartz108
Don't forget to take off film from m.2 cover. I think he did it, but he didn't mention it.
I explained in previous videos, where I took off the film, this one didn't have it, since I removed it on previous videos
Dont you want the radiator of the cooler to be above the pump so that air doesn't get trapped in your pump? When you install the radiator tubes down, any air that enters the loop will settle in your pump which could damage the pump on the cooler.
your thinking of it backwards, the air would get trapped in the radiator, not the pump, if the radiator had the air/bubbles, the pump would too
this is one method that is correct, the other correct one would be with the radiator up at the top. What you don't want is the tubes facing the top, and above the pump, they have to be either aligned or below, never above.
@@ThisBytesForYou you want the pump to be below the tubes or radiator. Air rises.
@@TheSjuris damn, so you mean to tell me Jay, Steve and Arctic are wrong: support.arctic.de/lf2-420-a-rgbr3/
@@ThisBytesForYou you’re wrong
Why did you put the radiator hoses on the bottom? I understand that’s the WORST thing to do!
Actually, its the best, because the gravity will push the water down and when it comes back up, it will suck up bubbles instead of water, causing better, cooling, less noise, and longevity of the unit. Now, if you place the radiator at the same level as the pump, it would work perfectly as well, and of course at the top but the way this case is, the hoses would be above the pump and could cause more noise, less cooling performance and lower the longevity of the unit.
Actually, I did do something wrong in this build though, I have it pumping air out, which in all other cases would be the best scenario, but in this case, this is the only airflow from the front, which has the coolest air, so it would need air coming in. This case has fans on the bottom, but they are VERY low flow fans, and are not enough for the video card, vertically mounted video cards get hotter since the fans are so close to the glass, causing the fans to spin faster to make up for the lower amount of air and higher pressure.
Hoses at the bottom are best and of course at the top of the case (the ceiling of the case), BUT not every case will work that way because of video cards, hose lengths and other potential factors.
Your 3080ti seem to fit right in. Mine isn’t.
You have to give me some context, what isn't fitting in?
What's a deal breaker is the fact that there is no space for a capture card to go
yeah, there are plenty pros and cons to this case. Mind you, there are external capture cards (which I prefer because I can record BIOS' and from consoles, but I do reviews, I kind of need that, you may not) but no a days, most everything is built onto the motherboard, so they figured they could get away with it, or use low profile cards, what kind of capture card do you have?
Tubes on the AIO shouldn’t be lower than the CPU
You are incorrect, they shouldn't be higher
Anyone else hate sliding the motherboard across the desk?
Yup lots of people have commented that they hate it, oh well
@@ThisBytesForYou I'm only joking, no hate or seriousness
@@MultipleX18 no worries my friend
the way you slide the motherboard across the table 😖😖😖
And yet it still works perfectly fine all the motherboards I have done this too,literally thousands as a product development engineer for Alienware, Dell and velocity micro, and all worked perfect, funny ain't it
Please stop sliding the motherboard on the table. CRINGE
Been doing it for years hasn't damaged a thing, thanks though