Video

Hmmm, what is that, please explain? I've also had brain surgery, so I don't remember if I had a bad memory before or after the surgery haha

Hope it helps my friend, I am in deep editing mode right now

Haha, thanks bud, happy you enjoyed but even more you enjoyed I think because its too true hahah, every time. Thanks so much for your support my friend, it means the world to me.

Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.

Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.

Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.

Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.

Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.

Sooo, you didn't watch the video?

Good thing you have this guide to help you, it's helped a ton.

@@ThisBytesForYou apparently i got RAM that wasn't compatible with my mobo

@kakashi7280 that's a possibility but have you checked the motherboard manual to see what banks they are supposed to be installed into, this is for about 90% or more of configurations but some are different. What is the manufacturer and model number of your motherboard and ram?

What is the manufacturer and model number of your power supply

Theres the GPU temperature then there is Hot Spot temperature. The terms "GPU temperature" and "hot spot" are different spots, though similar in a sense. GPU Temperature: The general temperature of the GPU core (the graphical processing unit of the graphics card). It's usually an average or a single temperature reading from a specific sensor placed on the GPU die. It's a good indication of the overall thermal state of the GPU and is commonly reported by monitoring software. This is useful for understanding the general thermal condition of the GPU and ensuring it operates within safe limits. If this temperature is within a normal range, the GPU is likely functioning well. Hot Spot Temperature: Also known as "Junction Temperature" or "Max Temperature," this is the highest temperature recorded at any point on the GPU die. GPUs can have multiple sensors distributed across the die, the hot spot temperature represents the highest reading from these sensors. The hot spot temperature can be significantly higher than the average or general GPU temperature because it identifies the hottest part of the GPU, which can be critical for preventing thermal damage and ensuring optimal performance. It's good for identifying potential thermal issues that might not be apparent from the average temperature alone. A high hot spot temperature can indicate poor cooling, issues with thermal paste or pads, or localized overheating, which could lead to thermal throttling or damage if not addressed.

Check in the description

Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.

What is the manufacturer and model number of your power supply

are you building a new pc?

@@ThisBytesForYou no I'm not sir my pc is 7 months old I have the latest updates in my windows 11, I also have the latest updates on my chipsets and I also have the latest gpu update my only problem right now that is not up to date is my bios sir.

When was the last time you updated your gpu driver, chipset and BIOS?

@@ThisBytesForYou my gpu driver last month and my bios last year november adn Im done like and share and subscribing your channel.

@@zhouzenkamfachannel1394 I always update as they come out to make sure I have the best performance and to make sure you got all the security features

it helps to watch the video to see it clearly

Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.

Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.

Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.

you might have seen the wrong video, new board and new card, impossible to have sag so soon, but if you do have the issue, check out this video: czcams.com/video/hyEJz56yg24/video.html

​@@ThisBytesForYoubut my 7900 GRE sags :(. And i dont like it :( idk if my pcie connecter

@@Arilovesyou- sooo crazy thing.... Did you watch the video I linked up, also, every long card will sag after a period of time.

@@ThisBytesForYou I got it like last month😭

@@Arilovesyou- so you want to make in it sag more without a bracket?

There are a few power supplies that use this, this is one, yes you can plug in the EPS (CPU) or PCIE cable here, I hope you are using 1 PCIE cable per connection on the card, not daisy chaining

Did you watch the video...

@@ThisBytesForYou let me watch it again…I’m in the process installing window 10. Hopefully that will work. It’s just now it only takes me to bios. I can’t even go to windows.

@@uphill248 probably because you have liquid cooling or haven't set your boot options

@@ThisBytesForYou I forgot to mention the updated work. I’m just still stuck on the F1 error. Maybe if I reinstall windows hopefully that will work?

Watch the video,... geez dude I could be hiding gold bars in my videos and people would never find them, you have liquid cooling right? I answered question #1 in the video... and surely I answered question #2

Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.

Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.

What is the manufacturer and model number of your power supply, your graphics card and your motherboard.

Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.

Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.

They cost less than $10, save a few bucks and you can get it, or if you have your motherboard box you might have extras, no reason to be so dramatic, there was no waste of time. 3 cables for $7 off of my Global Amazon Affiliate link: geni.us/1up1jYg

Depends on your board, you should check out your motherboard manual but on ddr4 or 5 it would drop it to single channel

Did you watch the video

Thanks bud, I truly appreciate it, glad to see you back too. I am working on a lot at the moment and life is kinda blocking me from publishing, but I am on it, thanks so much for your support.

Sapphire has a minimum requirement of 700Watts, you could leave your 600Watts and risk blue screens, shut downs or worse, I think if you are paying for a nice card, pay for a decent power supply, if you buy a nice one up front, it will work on your next card, and you next, I have been using 1200 and 1000Watts for over 15 years, the 1000Watts are about 5 years old, maybe older, and they have seen SOOOOOOOOOO many cards, the 1200, I gave to a friend, and its seen sooooooo many upgrades, spend more now, save tons later. This is one of the 3 I use every time, off of my Amazon affiliate link: geni.us/01x0

@@ThisBytesForYou The techpower up recommends a 550w power supply for the RX 7700 XT, that's why I asked, the RTX 3070 consumes more or the same as an RX 7700 XT and the recommended is 550w.

The sapphire states they require 700 watts and it's based off of a fully built system, techpower up is giving you their recommendation off of a build they build. Sapphire tests extreme to make sure there is no issue when you build. That still recommend at least that if not higher so you don't have to keep buying power supplies everytime you upgrade. You already made up your mind though before you came.

you don't "need" to, but maybe this video will help you understand why you should, but totally up to you: czcams.com/users/shortsg5CV_TlGN1k

@@ThisBytesForYou thanks sir

anytime, though I am sure you decided not to flash the BIOS

@@ThisBytesForYou I didn't because I don't know how 🤣

@@zhouzenkamfachannel1394 it will be VERY similar to how I do it here: czcams.com/video/jzFl6ejaQgk/video.html but you will use the BIOS located here: www.msi.com/Motherboard/PRO-B650M-A-WIFI/support BIOS version: 7D77v1J

No, a 6600 is much better than a 3050 So that I can help, please list the manufacturer and exact model number of the following components: 1. Motherboard - manufacturer and exact model number 2. CPU - manufacturer and exact model number 3. RAM - manufacturer and exact model number 4. Power supply - manufacturer and exact model number 5. Monitor - manufacturer and exact model number Redundant I know, but many people forget to enter manufacturer and exact model number 6. Are you running through HDMI, DP, DVI, VGA, any adapters? 7. Is UEFI or Legacy Setup in the BIOS? 8. What slots do you have your RAM installed in? 9.Do you have CSM Enabled or Disabled in the BIOS 10. Installed latest supported chipset driver? 11. What version of windows do you have installed, 7, 8, 8.1, 10, 11, etc? 12. This video will help you identify hardware inside your PC: czcams.com/video/65ZSiVImJx0/video.html

@@ThisBytesForYou my pc specs CPU- amd ryzen 5 2600 Motherboard- msi b450 pro m2 v2 Ram- Corsair vengeance 3000 mhz ddr4 8 gb 2 sticks Power supply- Antec VP 550 plus Monitor - Hp M22F USING HDMI PORT CSM ENABLED RAM STICKS IN DUAL CHANNEL ALL LATEST DRIVERS INSTALLED Original WINDOWS 11

2: Make sure your on the latest BIOS 7B84v4E: www.msi.com/Motherboard/B450M-PRO-M2-V2/support 3: ARE you set to XMP in the BIOS? 5 and 6: Are you using an HDMI 2.1 cable, Amazon Global Affiliate link: geni.us/YfYJcu 7: You didn't answer the question 8. That's not what I asked 1, 2, 3, 4 are the slots for example, where are they plugged into, 1 being the closest to the CPU (I get they are not named 1,2,3,4 but its the easiest to ask for) 10: Latest since when, you are using 6.05.28.016 released 2024-06-11? 12. This video will help you answer #7 or you can check in device manager: czcams.com/video/65ZSiVImJx0/video.html I am trying to help you, help me help you.

I have not tried it recently, but i have seen it work years ago on older generation amd cards.

@@ThisBytesForYou Yea I just figured it out the RX 7600 XT features a PCI-Express 4.0 x8 host interface, it will work on any PCIe x16 slot

@@jacobhaussmann90 right though I show you that here as well, and I go over it in other video but I haven't put a physical x8 card (or 16) in an electrical x4 in years, thankfully haven't needed to, I am interested to see if you are running into a need for this?

Yes, but if they don't match.... They don't fit so you are good

@@ThisBytesForYou Phew! Thank you so much for taking time to reply and help me

Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.

yes, like with math, 6+2 equals 8, its the same thing my friend, you are good, just don't daisy chain them.

Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.

So that I can help, please list the manufacturer and exact model number of the following components: 1. Motherboard - manufacturer and exact model number 2. CPU - manufacturer and exact model number 3. RAM - manufacturer and exact model number 4. Video Card - manufacturer and exact model number 5. Power supply - manufacturer and exact model number 6. Monitor - manufacturer and exact model number Redundant I know, but many people forget to enter manufacturer and exact model number 7. Do you have ALL of the PCIE connections plugged in, and not daisy chained or pigtailed, each coming directly from the power supply? 8. Are you running through HDMI, DP, DVI, VGA, any adapters? 9. Is UEFI or Legacy Setup in the BIOS? 10. What slots do you have your RAM installed in? 11.Do you have CSM Enabled or Disabled in the BIOS 11. Installed latest supported chipset driver? 12. Have you disabled Fast Boot within Windows? 13. What version of Windows do you have, 7, 8, 8.1, 10, 11? 14. This video will help you identify hardware inside your PC: czcams.com/video/65ZSiVImJx0/video.html

It is a great case for sure, happy you enjoy it as well

Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.

Toujours un plaisir mon ami, tellement heureux que ça te plaise et que tu les trouves bénéfiques

NGL, this is just adding a drive, check out my build guide and if you are interested I will send you the bios flashing, configuration, windows install and drivers guide too czcams.com/video/v3GOGIJP_tA/video.htmlsi=PZYOfTG2OoCmUKXe

Restore in disk management, I have not seen that, I think that's the name you gave your drive.

@@ThisBytesForYou nope from after cloning.. and i check in my original ssd there's nothing a RESTORE name

@@fast4ward294 not sure, did you see it in this video? What did you use to clone?

@@ThisBytesForYou macrium reflect..maybe possible to delete that😅

@@fast4ward294 is it part of 3 partitions... And did you see it in this video?

Well awesome Ibud, so very happy I could help you

Haha, well always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.