Bruh why does he have such a limited articulation? Like Akaza has a design that could've easily been adapted on an action figure format just as how they did with Inosuke
Right? For it to turn out this bad they almost had to make a deliberate attempt to put all the worst design decisions into it, as if they were trying to go "So how shit can we make this figure and people will still buy it?"
mines shoulder joint snapped, wasnt even rough with him, bought buzzmods version right after and asked goodsmile for a refund/replacement joint. Sad to see he didnt get the same justice as rengoku.
They had the right idea but they executed all of it terribly. The buzzmod actually has pretty much the exact same articulation as the figma but actually implemented right.
Technically, they are. Max Factory did the Rengoku figma while Akaza is an SP release and was done by Freeing. For some reason Freeing don’t use all the latest engineering techniques. This is really unfortunate as I was really excited for this figma
@@TheNonnahir Literally all they had to do was go to Max Factory (who I assume approached them to do Akaza while they did Rengoku) and go "ey bro can I just peep your homework for a bit?" and then adopt the Tanjiro/Zenitsu/Inosuke/Rengoku-style crotch and knee joints for Akaza.
@@Zakjuh I agree. I’m not trying to say it’s a good figure, I have it and it is severely lacking. I’m just saying that for some reason Freeing don’t put out figures that have as good articulation as Max Factory. I wish it was different, I really wanted this figure to be good
Yeah, the moment I saw that he was being produced by freeing, my expectations for this figure dropped immediatly. To explain what is happening here, this is a completely different manufactuarer and NOT Max Factory. When it comes to the Demon Slayer line, Max Factory is what we're used to. This is a completely different manufacturer, which explains the drastic difference in quality compared to Rengoku.
FREEing isn't universally bad. It's just that they tend to do the more gritty Figma over the typically anime ones, which begs the question: why did they produce Akaza? Why not just Max Factory, since they were also working on Rengoku anyway? It's true that FREEing Figma tend to be overpriced for what you get, but I can't say I anticipated this level of quality (or rather lack thereof) just because of the name FREEing.
I was waiting for this one. As amazing as Rengoku was, I expected (based off pictures and reviews by other people) that Akaza would be in turn horrible in equal measure. It's absurd that these are two figures, both Figma, of similar price, released at basically the same time, from the same series, meant to be paired, and yet they're so wildly different in how they're executed. I can deal with him having so few accessories, even if I don't like it, I can deal with the atrocious Marvel Legends-tier ab hinge, even if I don't like it. What I can't handle is that we have a Brawler character, technically the most nimble of them all so far, and he has the worst articulation. Why do all of the other KnY/DS Figma have an existing and functioning knee joint, for example, and Akaza has this weird, pitiable Marvel Legends-tier hinge that doesn't even hit 90 degrees? If they were going to be lazy, just reuse the engineering of the other characters! Then they have his plastic shirt cut up in 3 in the back, presumably for butterfly joint freedom... BUT THEN HE DOESN'T HAVE ANY, and the plastic is so hard it you can't even press into it to get more out of it. WHY THE CUTS THEN!? A Brawler character! The guy who does kicks and jumps and flies around and he has the worst range of them all because some guy over at FREEing phoned it in hardcore. *10k yen btw*. Rengoku is amazing and has a slew of accessories. Akaza is incomprehensibly limited and has basically no accessories. It's like they were like "Okay, Rengoku is finished and he's pretty amazing. Probably one of the better recent Figma. Now how can we make every wrong design decision with Akaza to make sure he's basically a waste of plastic, time and money." How does this happen?
I feel like this figure is ultimately an accessory for the rengoku figure. I'm gonna have fun pairing them up together but no way this guy is any good on it's own.
@@arielazaria4680 Which would be fine if he came with Rengoku. But he didn't. You're right that he's meant to be paired with Rengoku, they're even on the promotional images together. But Akaza is still its own figure, a 11,000 yen figure. With basically 0 accessories and wonky engineering or just outright no engineering at all where there should be. If anything, pairing it with Rengoku only serves to illustrate the stark contrast in quality and effort. (I still want to know why the vest is cut up in three pieces if it doesn't do anything! Did they intend to add a butterfly in an earlier stage and then just cancelled that but kept the vest cuts? They serve no purpose now!)
@@Zakjuh you're right about everything. I wonder how this figure would have turned out had it not been made by freeing. But it's not like freeing specifically had been making bad figures so I can't figure out how they manage to fubmle this so badly. When I first saw some in-hand images of akaza on instagram, there was a photo from the back and i noticed the vest and was like 'ew, oh wait that means he has butterfly joints like the rest of them, awesome' now I'm just... ugh.
@@arielazaria4680 It really is strange. I would argue that FREEing Figma can be on the expensive side even by Figma standards, but they're never this outright mediocre. This is as grating as it is puzzling, if you ask me. Like, don't get me wrong, as someone who ordered him (just because I got Rengoku as well) I am frustrated, but I'm just as confused. So many things about this release are just outright strange that I really have to wonder what kind of weird stuff happened during the development of this for it to turn out this way. Like you and I both mentioned, the splits in the vest are one major thing that stands out, but the entire leg sculpt and engineering as well. I also saw someone pop out the lower leg (where it slots into the bottom of the pants) and it has a sort of rounded peg that makes it seem like it was meant to be articulated?
@@Zakjuh That's the perfect word to describe it - strange. I mean, is there even a single other figma with freaking pin joints? My best guess is that whoever was in charge of designing this figure, was rushed to have it ready fast so it could be out the same time rengoku is, thus resulting in a product that feels all but finished. If that's the case, then I feel bad for the designer. I simply can't imagine some higher up looking at it and not seeing any flaws with it. it had to have been rushed.
I think Freeing is the company that made the figure as opposed to Max Factory. I could be wrong but that could be part of the reason that it's not made as good as Rengoku. Thanks for your review. Both him and Rongoku should arrive from AmiAmi tomorrow but I'll likely just display him in the box.
I'm actually really happy with Akaza. I had my expectations basically set at nothing for him, and I'm actually happy with him! But Rengoku... He's in another league for sure (like you were saying). I got Rengoku in the mail yesterday and then Akaza today. Been a happy few days for me haha. But unfortunately Akaza was made by Freeing? Which isn't Max Factory... so I think that explains a number of things that were lacking on this figure.
Same here too! I just got Akaza today and in all honesty, it ain't bad but definitely compared to Rengoku, Rengoku is just in a league of its own but Akaza can still pose really well despite the limitations. Also it is my first FREEing figma figure so just asking, is this like a common thing for FREEing figures or just this figure particularly?
@@TheDustysoap FREEing, from my experience, tends to be pretty overpriced for what you get, but most of the time they're alright figures with decent engineering. This one stands out as particularly low-effort (or, worse yet, has hints of effort being put in and then unceremoniously dropped. See: the split vest sculpt which I can only assume was there to accommodate a butterfly at some point, but it doesn't have one) On the Figma side of things, FREEing is generally behind some of the more grittier and realistic figures, such as the Silent Hill ones, the Table Museum Figma and arguably also the God Hand Berserk Figma. Though Akaza is exceedingly mediocre for the price and company (imho), it's not the only recent FREEing Figma that isn't so well received. The Table Museum Tutankhamun was also blasted for the casket being extremely cheap looking compared to the promotional images.
@Commander Javik thank you for the explanation 🙏 but that really really sucks to hear about FREEing tho cuz some of their figures do look really good in terms of the design and sculpt but at the cost of being pricey and having limited articulation. I still like the Akaza figure and don't regret the purchase for it at all but I will keep in mind around future FREEing figures for now on.
FREEing is a different branch of GSC. It means Max Factory didn't handle this release. FREEing typically makes 1/4 scale bunny girl figures, but they dip into figma and nendo lines from time to time as well.
Same here! It truly is a pretty good accurate representation of Akaza from the anime even if the articulation is limited but even with that, I'm still able to pose him into great fighting stances despite that.
@TheDustysoap Yeah, man, too many picky people these days. I agree the articulation should be better, but damn, come on, outright ruling off the entire figure? It's completely not necessary.
@@WhiteKnightPicturesBeing honest now equals to being picky?! Nah y’all just suckers for these companies. Akaza is perfect action figure material yet this figure looks like a statue.
bro I already pre order dit and I knew the articulation were not gonna be the best but I didn't think it would be that bad, fortunately I ordered the buzzmod one too
Yeah this settles it- I'm goin for Buzzmod🤣🤣🤣 Sucks cause Figma got the most awesome accessories but what's the point if you can't even enjoy the figure... For listing price of $90 helllll nahhhh they forgot to release this on April 1st💀🤣
The Buzz Mod version is way better. It has a bulkier look which really captures Akaza. But it does have the same problem with the pink tassels on his waist. Maybe even worse. Aside from leaving the pink scratches on his pants, those are removable and if you're not careful, you might lose those if they fall off.
I feel like figma does really good figures well some like Rengoku but they make a figure that it is ridiculous and figma acts like they don’t know how to make figures
I own this figure. This one by far is the weakest of the Demon Slayer line. Max Factory didn't even make this, Freeing did. And apparently they are also making Mahito and Jougo from JJK.
Are you gonna do a review for the buzzmod akaza? I have it already but the buzzmod seems so much better to me, it would be interesting to see your thoughts or a comparison between the two
Did you not read the description on the website? Good smile, max factory did NOT sculpt the figure. This is not their fault to blame, however the fact that it's this bad does lay on them slightly, it's not completely their fault. But I understand the frustration.
its most likely Freeings side of the figure because with all the other figma ones have been good but it's this time they do one with Freeing it makes the figure lack items and other things.
Yah it is ridiculous bad for figma and if it's deluxe collection they should put more atlist to cover the bad articulation hahaha 😆 any way this review really helps no way for 90$ on it no way bro
At least give us some shading 😑 I would say the eyes look a little foggy to me, it's kinda gone in the tattoo (per say) And yes the reverse ab crunch just looks terrible and it doesn't have much articulation, the articulation looked terrible from the start but at least it worked but now making it not work either, now that terrible
Wtf Figma…. U somehow managed to release the worst figure of the year. Big regrets ordering this pos. Do better GSC because you are capable of doing so much better!!!
It's a Figma, but it's not by the people you are used to. FREEing did Akaza. That doesn't make it alright, I mean, it's still distributed as a Figma, but it might help explain just how it could be so different.
Es figma.... obviously is not that worthy.... They dont even try any harder to improve in its articulation. They only are good to give release and release of anime girls... thats what they are only good for.
Goodness why would Tamashii nations doesn't have the license for DM sh figuarts recent figures are in another league compared to this joke of a figure and the price goodness figma try to compared it to SHF Naruto for just 35 buck and has more accessories dude!!!!!!
I'm not even going to say BUZZmod killed Figma. I'm going to say Figma killed Figma. BUZZmod didn't even need to do anything. It just had to stand there while Figma seppuku'd itself in front of it. Which is hilarious considering there is a great argument to be made that the Figma Rengoku is vastly superior to the BUZZmod Rengoku.
@@Zakjuh I think buzzmod rengoku looks better, and may have better accessories. But figma rengoku does come close if not better than the buzzmod. THIS..THIS...NAHHH BRO 💀 THEY JUST GAVE BUZZMOD THE W 💀💀💀
Bruh why does he have such a limited articulation? Like Akaza has a design that could've easily been adapted on an action figure format just as how they did with Inosuke
Right? For it to turn out this bad they almost had to make a deliberate attempt to put all the worst design decisions into it, as if they were trying to go "So how shit can we make this figure and people will still buy it?"
mines shoulder joint snapped, wasnt even rough with him, bought buzzmods version right after and asked goodsmile for a refund/replacement joint. Sad to see he didnt get the same justice as rengoku.
They had the right idea but they executed all of it terribly. The buzzmod actually has pretty much the exact same articulation as the figma but actually implemented right.
If this was 20$, I'd have no problem buying this
You will never get this level of paint quality and finish on a 20 dollar figure.
@@WhiteKnightPictures nah bruh..sonic jakks pacific are better than this...and they are 10$ in Walmart or target..
@@capone6716seriously 😭
@WhiteKnightPictures idk man if you go to any store and look at the 20ndollar toys they don't look to good
you'd have to pay me to get this out the store
I saw this coming😭 glad I cancelled mine
Buzzmod was the way to go ong 💀
The duke Dennis sound effects 😂😂😂😭
"Boy ain't no way boy" why did they downgrade him so horribly from rengoku, thanks for a review because this guy would be sad to look at in hand.
Figma out here making everyone else look good. 😂
A near $100 figure with $10 articulation and pinned joints?! LOL thank you for saving my money Ace
buzzmod annihilated figma in this figure
Its a shame this figure has issues.. still holding out for the buzzmod version... appreciate you Ace ..stay blessed ✊🏾
Buzmod is better
Dam Buzzmod wins since I have it personally and this figma looks scrawny imo , loved the vid ace
Bro it feels like rengoku and Akaza are from two different companies
Technically, they are. Max Factory did the Rengoku figma while Akaza is an SP release and was done by Freeing. For some reason Freeing don’t use all the latest engineering techniques. This is really unfortunate as I was really excited for this figma
@@TheNonnahir Literally all they had to do was go to Max Factory (who I assume approached them to do Akaza while they did Rengoku) and go "ey bro can I just peep your homework for a bit?" and then adopt the Tanjiro/Zenitsu/Inosuke/Rengoku-style crotch and knee joints for Akaza.
@@Zakjuh I agree. I’m not trying to say it’s a good figure, I have it and it is severely lacking. I’m just saying that for some reason Freeing don’t put out figures that have as good articulation as Max Factory. I wish it was different, I really wanted this figure to be good
Yeah, the moment I saw that he was being produced by freeing, my expectations for this figure dropped immediatly. To explain what is happening here, this is a completely different manufactuarer and NOT Max Factory. When it comes to the Demon Slayer line, Max Factory is what we're used to. This is a completely different manufacturer, which explains the drastic difference in quality compared to Rengoku.
FREEing isn't universally bad. It's just that they tend to do the more gritty Figma over the typically anime ones, which begs the question: why did they produce Akaza? Why not just Max Factory, since they were also working on Rengoku anyway?
It's true that FREEing Figma tend to be overpriced for what you get, but I can't say I anticipated this level of quality (or rather lack thereof) just because of the name FREEing.
I was waiting for this one. As amazing as Rengoku was, I expected (based off pictures and reviews by other people) that Akaza would be in turn horrible in equal measure. It's absurd that these are two figures, both Figma, of similar price, released at basically the same time, from the same series, meant to be paired, and yet they're so wildly different in how they're executed.
I can deal with him having so few accessories, even if I don't like it, I can deal with the atrocious Marvel Legends-tier ab hinge, even if I don't like it. What I can't handle is that we have a Brawler character, technically the most nimble of them all so far, and he has the worst articulation. Why do all of the other KnY/DS Figma have an existing and functioning knee joint, for example, and Akaza has this weird, pitiable Marvel Legends-tier hinge that doesn't even hit 90 degrees? If they were going to be lazy, just reuse the engineering of the other characters! Then they have his plastic shirt cut up in 3 in the back, presumably for butterfly joint freedom... BUT THEN HE DOESN'T HAVE ANY, and the plastic is so hard it you can't even press into it to get more out of it. WHY THE CUTS THEN!?
A Brawler character! The guy who does kicks and jumps and flies around and he has the worst range of them all because some guy over at FREEing phoned it in hardcore. *10k yen btw*.
Rengoku is amazing and has a slew of accessories.
Akaza is incomprehensibly limited and has basically no accessories.
It's like they were like "Okay, Rengoku is finished and he's pretty amazing. Probably one of the better recent Figma. Now how can we make every wrong design decision with Akaza to make sure he's basically a waste of plastic, time and money."
How does this happen?
I feel like this figure is ultimately an accessory for the rengoku figure. I'm gonna have fun pairing them up together but no way this guy is any good on it's own.
@@arielazaria4680 Which would be fine if he came with Rengoku.
But he didn't. You're right that he's meant to be paired with Rengoku, they're even on the promotional images together. But Akaza is still its own figure, a 11,000 yen figure.
With basically 0 accessories and wonky engineering or just outright no engineering at all where there should be. If anything, pairing it with Rengoku only serves to illustrate the stark contrast in quality and effort.
(I still want to know why the vest is cut up in three pieces if it doesn't do anything! Did they intend to add a butterfly in an earlier stage and then just cancelled that but kept the vest cuts? They serve no purpose now!)
@@Zakjuh you're right about everything. I wonder how this figure would have turned out had it not been made by freeing. But it's not like freeing specifically had been making bad figures so I can't figure out how they manage to fubmle this so badly.
When I first saw some in-hand images of akaza on instagram, there was a photo from the back and i noticed the vest and was like 'ew, oh wait that means he has butterfly joints like the rest of them, awesome' now I'm just... ugh.
@@arielazaria4680 It really is strange. I would argue that FREEing Figma can be on the expensive side even by Figma standards, but they're never this outright mediocre. This is as grating as it is puzzling, if you ask me. Like, don't get me wrong, as someone who ordered him (just because I got Rengoku as well) I am frustrated, but I'm just as confused. So many things about this release are just outright strange that I really have to wonder what kind of weird stuff happened during the development of this for it to turn out this way. Like you and I both mentioned, the splits in the vest are one major thing that stands out, but the entire leg sculpt and engineering as well. I also saw someone pop out the lower leg (where it slots into the bottom of the pants) and it has a sort of rounded peg that makes it seem like it was meant to be articulated?
@@Zakjuh That's the perfect word to describe it - strange. I mean, is there even a single other figma with freaking pin joints? My best guess is that whoever was in charge of designing this figure, was rushed to have it ready fast so it could be out the same time rengoku is, thus resulting in a product that feels all but finished. If that's the case, then I feel bad for the designer. I simply can't imagine some higher up looking at it and not seeing any flaws with it. it had to have been rushed.
Yep! already knew who I was gonna get from the start!😂😂 wasn't really gonna even get Akaza anyway... Rengoku all the way boi!!
You should definitely do a comparison vid between this hot mess of a figma and the buzzmod.
I think Freeing is the company that made the figure as opposed to Max Factory. I could be wrong but that could be part of the reason that it's not made as good as Rengoku. Thanks for your review. Both him and Rongoku should arrive from AmiAmi tomorrow but I'll likely just display him in the box.
Ngl this just looks like a $20 figure
McFarlane decided to take this one for good smile
@@ReggieKong64 McFarlane ain't even worth 20$ [Some..no most of the time] jakks pacific >>>>>
Good thing I canceled my preorder and went for buzzmod instead, just waiting for it to still arrive
Figma been working on improving the box design instead of figure engineering. Sadge.
4:55 boy ain't no way boy
This video makes me want to cry
I'm actually really happy with Akaza. I had my expectations basically set at nothing for him, and I'm actually happy with him! But Rengoku... He's in another league for sure (like you were saying). I got Rengoku in the mail yesterday and then Akaza today. Been a happy few days for me haha. But unfortunately Akaza was made by Freeing? Which isn't Max Factory... so I think that explains a number of things that were lacking on this figure.
Same here too! I just got Akaza today and in all honesty, it ain't bad but definitely compared to Rengoku, Rengoku is just in a league of its own but Akaza can still pose really well despite the limitations. Also it is my first FREEing figma figure so just asking, is this like a common thing for FREEing figures or just this figure particularly?
@@TheDustysoap FREEing, from my experience, tends to be pretty overpriced for what you get, but most of the time they're alright figures with decent engineering. This one stands out as particularly low-effort (or, worse yet, has hints of effort being put in and then unceremoniously dropped. See: the split vest sculpt which I can only assume was there to accommodate a butterfly at some point, but it doesn't have one)
On the Figma side of things, FREEing is generally behind some of the more grittier and realistic figures, such as the Silent Hill ones, the Table Museum Figma and arguably also the God Hand Berserk Figma.
Though Akaza is exceedingly mediocre for the price and company (imho), it's not the only recent FREEing Figma that isn't so well received. The Table Museum Tutankhamun was also blasted for the casket being extremely cheap looking compared to the promotional images.
@Commander Javik thank you for the explanation 🙏 but that really really sucks to hear about FREEing tho cuz some of their figures do look really good in terms of the design and sculpt but at the cost of being pricey and having limited articulation. I still like the Akaza figure and don't regret the purchase for it at all but I will keep in mind around future FREEing figures for now on.
4:55 Alright bruh😂😂😂
15:16 The year 2020? You Time-Traveling or something Ace 😂
I was so pissed I didn’t even realize I said that 😂
My neighbor Totoro is what you were thinking about when talking about the smile.
Idk what it is lately but for every W Good Smile holds, it seems like they hold a catastrophic L as well
Pretty sure he’s so bad bc FREEing manufacturered him and not max factory 😭😭
They gave my boi love handles
Karate Pennywise lol
I was waiting for the buzzmod to show up and obliterate this mockery of a figure lmao
FREEing is a different branch of GSC. It means Max Factory didn't handle this release. FREEing typically makes 1/4 scale bunny girl figures, but they dip into figma and nendo lines from time to time as well.
Ahh figma good figures then disappoint with some figures it's a cycle at this point
I really like mine. Sure, he's limited, but it's still a pretty good-looking figure aestheticly.
Same here! It truly is a pretty good accurate representation of Akaza from the anime even if the articulation is limited but even with that, I'm still able to pose him into great fighting stances despite that.
@TheDustysoap Yeah, man, too many picky people these days. I agree the articulation should be better, but damn, come on, outright ruling off the entire figure? It's completely not necessary.
@@WhiteKnightPicturesBeing honest now equals to being picky?! Nah y’all just suckers for these companies. Akaza is perfect action figure material yet this figure looks like a statue.
Agh hell nah men
He didnt eat enough human
they should have applied figma Tanjiro knees for the articulation. For the price, very expensive. I'd buy it if they cut the price half.
This is the exact reason I got the Buzzmod version, as soon as I looked at it I knew it was trouble
Why does everyone hate on the figma akaza🥲
i recently stumbled across this guy for 50 bucks would you say this is worth that?
bro I already pre order dit and I knew the articulation were not gonna be the best but I didn't think it would be that bad, fortunately I ordered the buzzmod one too
im glad i got the buzzmod
Someone at good smile needs to fire the freeing team bc they fucked up beyond redemption imo.
Yeah this settles it- I'm goin for Buzzmod🤣🤣🤣
Sucks cause Figma got the most awesome accessories but what's the point if you can't even enjoy the figure...
For listing price of $90 helllll nahhhh they forgot to release this on April 1st💀🤣
thank you for saving me money!
Buz mod akaza it is will it match with the other figma figure
The Buzz Mod version is way better. It has a bulkier look which really captures Akaza. But it does have the same problem with the pink tassels on his waist. Maybe even worse. Aside from leaving the pink scratches on his pants, those are removable and if you're not careful, you might lose those if they fall off.
Figma thinks theyre hasbro with that ab crunch 🤮
You should’ve compared the figma version with the BUZZmod Akaza version
buzzmod is way better imo for this figure
I feel like figma does really good figures well some like Rengoku but they make a figure that it is ridiculous and figma acts like they don’t know how to make figures
Can you do the buzzmod akaza figure?
Im gonna get figma kyojuro then buzzmod akaza😂
Will you ever do a akaza buzzmod review?
I own this figure. This one by far is the weakest of the Demon Slayer line. Max Factory didn't even make this, Freeing did. And apparently they are also making Mahito and Jougo from JJK.
I realy don't like this figure look i am gonna go with the buzzmod and you should do the same
I think buzzmod akaza win this competition, did you have buzzmod akaza?
Seems like a bootleg
Figma gotta ditch that fossil joint system they use and improve ASAP!!! $90 for a piss poor “action” figure?!??
Yeah buzzmod akaza solos the figma one
Buzzmod W with the akaza
Naw bruh the knockoff LEGO minifig better than this 💀💀💀
Are you gonna do a review for the buzzmod akaza? I have it already but the buzzmod seems so much better to me, it would be interesting to see your thoughts or a comparison between the two
Buzzmod W. Have you done a review on the buzzmod?
One single accessory 💀
What were they thinking with this💀
Akaza is 2 inches shorter than rengoku
15:15 😂😂😂 OMG
I’m in disbelief that Figma RenGoku is so much better than this it’s just so crazy
did akaza lose some weight?
Did you not read the description on the website? Good smile, max factory did NOT sculpt the figure. This is not their fault to blame, however the fact that it's this bad does lay on them slightly, it's not completely their fault. But I understand the frustration.
its most likely Freeings side of the figure because with all the other figma ones have been good but it's this time they do one with Freeing it makes the figure lack items and other things.
Where did you order this one from? Also this looks kinda good tbh, lack of accessories, but looks kinda solid to me.
Right after making this comment, instant regret. Im really bout to get the buzzmod one nvm.
@@Orion0820 DANG! 💀💀💀💀
I got the Buzz mod figure and it has way better articulation in my opinion
How incredibly disappointing
I'm not a fan of Demon Slayer but as a figure collector this hurts to watch. For a $90 price tag? Unacceptable.
Yah it is ridiculous bad for figma and if it's deluxe collection they should put more atlist to cover the bad articulation hahaha 😆 any way this review really helps no way for 90$ on it no way bro
Okey buzzmod ITS better this time
The faces lol derpy kinda
At least give us some shading 😑
I would say the eyes look a little foggy to me, it's kinda gone in the tattoo (per say)
And yes the reverse ab crunch just looks terrible and it doesn't have much articulation, the articulation looked terrible from the start but at least it worked but now making it not work either, now that terrible
Wtf Figma…. U somehow managed to release the worst figure of the year. Big regrets ordering this pos. Do better GSC because you are capable of doing so much better!!!
It's a Figma, but it's not by the people you are used to. FREEing did Akaza. That doesn't make it alright, I mean, it's still distributed as a Figma, but it might help explain just how it could be so different.
For a deluxe figure, I expected more, hell even your average Figma Doom Slayer us worth more than this scam of a figure.
Figma should stick to Waifus and Fate figures, their Kimetsu no Yaiba line is terrible. Thank god I've got Buzzmod
Statue figma, I see.
Es figma.... obviously is not that worthy....
They dont even try any harder to improve in its articulation.
They only are good to give release and release of anime girls... thats what they are only good for.
It's so strange how shitty the articulation is for figma!
Yeah, Freeing made figures really bad to be honest
Goodness why would Tamashii nations doesn't have the license for DM sh figuarts recent figures are in another league compared to this joke of a figure and the price goodness figma try to compared it to SHF Naruto for just 35 buck and has more accessories dude!!!!!!
I have a Mexican Mazinger bootleg and the leg articulation looks the same. Horrible, horrible.
GET. THE. BUZZMOD. IT IS SUPERIOR💯
Yall buzzmod killed figma with this one 💀
I'm not even going to say BUZZmod killed Figma.
I'm going to say Figma killed Figma. BUZZmod didn't even need to do anything. It just had to stand there while Figma seppuku'd itself in front of it. Which is hilarious considering there is a great argument to be made that the Figma Rengoku is vastly superior to the BUZZmod Rengoku.
@@Zakjuh I think buzzmod rengoku looks better, and may have better accessories. But figma rengoku does come close if not better than the buzzmod. THIS..THIS...NAHHH BRO 💀 THEY JUST GAVE BUZZMOD THE W 💀💀💀