Video není dostupné.
Omlouváme se.
Metal Detecting 101 - Discrimination and Notch
Vložit
- čas přidán 17. 06. 2019
- Hello there! Thanks for checking out my channel, and hopefully subscribing.
If you liked this video - go watch 9 of my other videos for even more rad content. (10% radness rate per video)
If you didn't like this video - go watch 9 of my other videos to make 100% sure. (10% sureness rate per video)
I AM NO LONGER A METAL DETECTOR DEALER - and am no longer participating in the hobby due to health reasons (blood clots suck).
Donations:
www.paypal.com...
All Socials = @thehuntergt
🛒 Amazon Shop! - www.amazon.com/...
(Disclaimer: As an Amazon affiliate I make a profit from that link)
❓FAQ❓
NAME: John...but you can call me Supreme Commander Overlord...or HunterGT
AGE: 48 and in my prime...ahem...
LOCATION: Fresno, California
HOBBIES: Synthesizers - Computers - Gaming...anything tech related.
FOODS: Kale...ratioed 1:10000 with green chili smothered burritos - bacon cheeseburgers - and Lucky Charms
Favorite Band: The Moody Blues...or Pantera...maybe Pink Floyd...possibly Tool...
Favorite Games: Battlefield Series, Starcraft 2, Red Dead Redemption 2, Cyberpunk 2077, and MANY other PC games.
Favorite Colors: Black...or grey
Favorite Book(s): Coldfire Trilogy
TEAM(s): 🏈SF 49ers - ⚾SF Giants - 🏒LA Kings - 🏀Utah Jazz
Favorite Movies: Casino, Goodfellas, Blade Runner, Blade Runner 2049
🎥CAMS📷
Google Pixel 6 Pro - amzn.to/3GlM0MZ
Logitech BRIO 4k - amzn.to/3AqbNzD
Nexigo N970P - amzn.to/3JfH9NC
🖥️COMPUTER⌨️
CPU: AMD Ryzen 5900X - amzn.to/3gfuvDm
COOLER: Noctua NH-D15S - amzn.to/3Gq7FUb
MOBO: Gigabyte X570S Aorus Elite - amzn.to/3Gqn9HU
GPU: EVGA RTX 3070Ti FTW3 - amzn.to/3Of0Pmg
MEM: 64GB Team T-FORCE DARK Za DDR4 3600 - amzn.to/3UMK84e
CASE: NZXT H510 Flow - amzn.to/3TPKe9Q
FANS: Noctua NF-P14s redux-900 - amzn.to/3gcpZpb
PSU: Corsair RM850x - amzn.to/3GpeAwH
MON #1: LG 27GL850-B - amzn.to/3Oc6n13
MON #2: VIOTEK GNV34DBE - amzn.to/3EGiuAj
🎹Synths🎛️
Novation Circuit Tracks - amzn.to/3OhnHS0
Novation Mininova - amzn.to/3Oerv6y
Behringer TD-3 - amzn.to/3Aomjax
Arturia Keylab 49 Essential - amzn.to/3EDh75c
🎙️AUDIO🎚️
MOTU M4 - amzn.to/3V4ejU5
Audio-Technica AT2005USB/XLR - amzn.to/3AnZEeD
CAD GXL2400USB
Nobody reads this far down...what are you doing down here?
Love you're videos man, very detailed, you find some great things,I'm subscribed to you're channel, I've gotten alot of info and ideas off you're channel, I've just gotten mine up and going, keep up the great videos
Thank you, I appreciate the kind words. Best of luck with the channel - never give up!
Just sent out for a Landstar from bounty hunter. I had no idea what notching was for so I'm so glad I found this video.
I'm really liking this series, thanks!
Glad to hear that brother!
What exactly does notching out do? Does it just mute the audio? If you notch out foil, and then you scan over a gold ring with a piece of foil above it, will the detector see through the foil and only detect the ring?
Oh man , I really wish you wrote the instructions leaflet on my detector
You explain really well, thank you
Thanks...I appreciate that.
excellent lesson thank you! yeah get out of the heat!
Brutal hot today! Thanks for watching Papa!
Good, straightforward video. Thanks.
Great information to have. Thanks very much for the information you gave me for the Fisher F19 settings!
My pleasure Eddie. Glad to be of service!
thanks for everything you do
That was very helpful thank you
My pleasure. Thanks for watching!
Always enjoy watching these informative episodes. I would definitely be considered a green horn. I've only been detecting for a little over a month and am soaking in all I can store in my memory bank. Thanks for sharing and take care.
My pleasure man. I'm always here to help if you ever have any questions. We all start somewhere.
@@thehuntergt thanks, I appreciate that. Take care
Thanks for the continuing education units!
Thanks for watching Nick!
nice job Hunter. With either one will the object still be detected but the machine won't make a tone associated with the item or items that were notched out and/or discriminated out correct?
Thanks Mark. Depends on the detector I guess. I know some of them will still show an ID for a disced or notched out section. But the audio is just muted basically. Others will not show ID for those sections, and only show ID for the "in" sections. Others allow you to adjust the volume and tone pitch for the notched section. Hope that was what you meant.
So if I notch out pull tabs I will miss gold rings?
Yes.
I have always wondered if there were other benefits to using one over the other. I have heard using discrimination you can lose depth. So is it better to run without discrimination? Does Notch or Disc still detect the metal being filtered, just not make a sound. My point I am trying to explain is that if the detector is processing a filtered/ disc signal just not sending a tone, is there still a recovery time between that and a good signal. So if you had a junk target next to a good target and the junk target was disc out, would the good target get missed because of it? Sorry if I went a little too deep for this topic.
No worries Roger. Nothing is too deep and it is a great question. It will depend on the detector and process setup. Some detectors like the T2 have no notch and rely only on disc. The process is pretty good on it being pure digital, so it does not lose as much depth as say and analog machine like a Tesoro or Vista that uses high disc. AT Pro - T2/F75 - Anfibio - Nox...they are all digital so do not suffer as badly. The processor just knows how to deal with it better that an analog circuit. In a nutshell - yes - it is better to run zero disc. However, that can be mentally fatiguing and IMO the loss of depth being so minimal on some recent machines, I do not consider it a huge handicap in comparison to mental fatigue.
As far as does the detector see the disced out signal - yes. If you disc or notch something out it often shows up on the ID still (detector dependent)...but just not sound off. So it must be processing the signal to provide that ID number. So in turn it will affect recovery and separation etc. So an adjacent target can 100% be missed if the target next to it is disced. You may miss the iron wrap around in the audio or something like that. Disc is not magic...it is more of a "do you want it" over "do you need it". If a person can live with the extra info without frustration....0 disc is almost always the best option. Hopefully that helps!
@@thehuntergt Thank you for that excellent explanation! That does put it in better context for me.
@@canyadigitmetaldetectingwi7897 My pleasure man. Happy to help.
I see you're using the Magic Coil again (watched your review of that as well). Strongly recommended to work with along with the stock coil for my new F75+? Does not seem too expensive compared to many others. Do you have any suggestions for the *best* sniper type coil?
Yeah, for sure this size is great to go along next to the stock 11dd. Very similar to the 5x10, just stubbier. It separates as well as the 5dd sniper. So only benefit I see for the small sniper is around rocks and shrub where the 5x8 cannot fit. Performance is similar being 5 wide each.
What do you d0 when you want include gold?
You dig it all above iron and focus on repeatable signals. Gold lands from foil to zinc...so a true hardcore gold hunter will dig every mid range signal that is repeatable.
Perfect!!
We have a bounty hunter lone start. How would I set it for my tungsten ring ?
I don't have tungsten to test sorry...start at zero disc and dig it all.
Set sensitivity low - high
Disc/notch low-high
@@jeremyscroggins6687 Sens high...no dIsc or notch
So if im looking for coins but don't want to miss out on gold rings or jewelry i must have foil on? What do you recommend
If you want gold rings you must dig it all above iron.
Above iron? So exclude iron correct?
Thanks for the reply im subbing to your channel
@@youronlinefriend2859 Yes you can exclude iron. Most gold rings fall in the foil - nickel - pull tab range. Thanks for the sub!
Hunter GT, If you had to pick one, which one would you choose between F75+ or T2+?
I prefer the T2 to the F75...across the board.
👌👌👌👌👌👍👍👍👍
✌✌✌✌✌👍👍👍👍💖