One aspect to be careful of is to make a new aluminum material BEFORE adding perforations. If the panel material is shared with the mullion material, it will link and you won't be able to undo the linked qualities. You can see at minute 13:54 the mullions are perforated because they were the same aluminum as the panel.
Your excellent video raises a question: Can this "2 part" wall assembly receive conventional windows and doors? I'm trying to replicate a conventional rainscreen wall assembly with interior finish, insulated stud cavity, WRB, exterior insulation, wood or metal rainscreen strapping, and an open joint panel. Using the curtain wall type 1 (empty panel) I can assign the wall type as above, but when I insert the mullions as the rainscreen panel "gaps", they go all the way through the walls (no good). This 2 part method might fix this but I'm not sure the doors or windows will cut through both parts of your wall. Any advice you can provide is greatly appreciated. (Maybe you've created the video? I'm a recent patreon supporter but could not find an answer there) thanks!
How do you get the panels to join after setting the offset of the mullions? I offset my mullions behind the panels, but there's still a vertical void between them, so the mullion is still revealed.
Hi, is there a way to adjust this so that it will work within irregular shapes? such as a triangle or hexagon? I can only seem to get it to work with squares or rectangles and if its an odd shape it goes over the boundary
hi balkan , i just want to ask you if its possible to take a look how your project files look like ? in general i would be interested to join a patreon membership, because i want your project files but i dont know how they look like ;(
I apply this perforated facade design in revit, but when I throw it on the lumion, the shape version of the revitte in lumion goes away. so I can't see the perforated facade design. How can I fix
@@revitcourse Thx a lot, I will try it later and tell you if it works. But I think the lock and pin are not the same thing. Here's my situation I've put two windows, align them and lock them in place, then I couldn't unlock the one I want, when I click on the wall, it shows me only one lock for all the windows. So I found a solution, is that you click on the window and click on "Activate dimensions" and it work ^^
@@zakiklamson4409Pinning and locking are very different. When you lock an element you are assigning a constraint. I'm sure others will be along soon to add some extra help.
One aspect to be careful of is to make a new aluminum material BEFORE adding perforations. If the panel material is shared with the mullion material, it will link and you won't be able to undo the linked qualities. You can see at minute 13:54 the mullions are perforated because they were the same aluminum as the panel.
Great tutorial, architect! (y)
please make one complete video on a Spanish roof tile
you are a great architect
Hi Try this one. czcams.com/video/t2xGMI0jZME/video.html
You are the best
How do you render this? When I loaded my model in Enscape the panels were solid with no perforations. Any idea how to fix this?
Same problem, have you solved it ?
Same problem with lumion
can you make a video showing how to make acoustic poyester fiber panel in auditorium
I did this but when I render on lumion the cut outs don’t show. Do you maybe know why that might be?
is it possible to make the panel in an open joint? like 5mm between panels
Your excellent video raises a question: Can this "2 part" wall assembly receive conventional windows and doors? I'm trying to replicate a conventional rainscreen wall assembly with interior finish, insulated stud cavity, WRB, exterior insulation, wood or metal rainscreen strapping, and an open joint panel. Using the curtain wall type 1 (empty panel) I can assign the wall type as above, but when I insert the mullions as the rainscreen panel "gaps", they go all the way through the walls (no good). This 2 part method might fix this but I'm not sure the doors or windows will cut through both parts of your wall. Any advice you can provide is greatly appreciated. (Maybe you've created the video? I'm a recent patreon supporter but could not find an answer there) thanks!
So great. Tks u very much
Thanks
Jazakallah khiren
How do you get the panels to join after setting the offset of the mullions? I offset my mullions behind the panels, but there's still a vertical void between them, so the mullion is still revealed.
Nice tutorial, Balkan Architect. Sadly I couldn’t find the “empty panel option” Do you know why? Thank you and greetings from Ecuador
Hey i have the same question :D if you got the answer could you please share it with me
@@zheenahaydari5145 unpin it first
I have same question!!
Hi, is there a way to adjust this so that it will work within irregular shapes? such as a triangle or hexagon? I can only seem to get it to work with squares or rectangles and if its an odd shape it goes over the boundary
can u make triangle forms(fold or unfold forms) in facade?. origami in revit. Very helpful. very nice
I would look into grasshopper;
rhino.github.io/components/tttoolbox/unfold.html
Шикарно😀
Svaka ti dala :D
Thnx for all video
hi balkan , i just want to ask you if its possible to take a look how your project files look like ? in general i would be interested to join a patreon membership, because i want your project files but i dont know how they look like ;(
Hello guys... Does anyone has any idea about mesh cover... I have to caeat a mesh cover above wet does anyone has any idea about it?
Is it possible to do the same on round facades?
Great
Can we Prepare Perforation in Deferent Void Forms ?
Great ! :)
I apply this perforated facade design in revit, but when I throw it on the lumion, the shape version of the revitte in lumion goes away. so I can't see the perforated facade design. How can I fix
Şeyma aynısı başıma geldi, materyali sırf render için alüminum değil de noktalı cam olarak değiştirmek zorunda kaldım
I don't found the option:empty panel 😢😢😢
maya mayoosh same here 😔
@@brnaxD I asked someone to send it to me.
@@mayamayoosh2248 Can you resend it to me, please?
I'll be really thankful
Could you please say if the same method works for archs?
Arch curtain walls, I mean
Hello, I really need your help in this one and I hope you reply me. How can I unlock something that is locked in place ?
Thank you !
@@revitcourse Thx a lot, I will try it later and tell you if it works. But I think the lock and pin are not the same thing. Here's my situation I've put two windows, align them and lock them in place, then I couldn't unlock the one I want, when I click on the wall, it shows me only one lock for all the windows. So I found a solution, is that you click on the window and click on "Activate dimensions" and it work ^^
@@zakiklamson4409Pinning and locking are very different. When you lock an element you are assigning a constraint. I'm sure others will be along soon to add some extra help.
❤❤
duuuuuuuuuuuuuuude you use adaptive families for custom 3D panels,
Yeah I was thinking this too... weird workflow this time around.
So I have to modify 1500 panels in the project 😅😅😅
16 mins tutorial and u wasted my time buddy...do some advance level tutorials