Video není dostupné.
Omlouváme se.
Cubase and the Behringer XR18 as USB Interface for Recording
Vložit
- čas přidán 23. 12. 2018
- Learn how to use the Behringer XR18 digital stage mixer as a USB interface for the Cubase DAW
Get the ASIO usb driver and the X Air App here
www.behringer.com/Categories/c/Behringer/Downloads
www.behringer.com/Categories/...|en)
Thanks man!
thanks bro. good stuff
This is great!
Nice explanation! Wanted te ask, if i am in a live situation with a band and i want to put my totally dry guitar sound to in1 for ex., post process it inside the DAW (guitar rig for example) and than route back in any of the channels of the x air edit, is this possible, and if yes, is there any way you can get rid of the dry unprocessed guitar sound from analog input 1, i mean the same thing you would do with an audio interface, turn off the direct monitoring and turn on the monitoring inside the daw, so this way you only hear the processed sound? Thnx in advance
Thank you,
I found a way to record an instrument upon a mix with direct monitoring in the phone of XR18
The monitoring by cubase has a little latency time, so you can't use it.
To have the sound of cubase and the sound of the instrument by the direct monitoring (with no latency), you must switch input channel 17/18 (aux) to USB
Can you do multitrack recordings of the raw tracks and a live mix with the DSP processing independently of each other?
Hey Warren (and anyone else that can help) my setup was exactly as you did yours when I recorded my 4 piece band on 9 tracks (8 & 9 where FOH left and right to see how the mix sounded within the XR18). When I got back into Cubase 10 to playback all of the tracks played much slower than recorded. As in, they were slower timing AND the pitch was dropped relative to the timing change (deeper and slower).
I have researched online and there is a lot of confusion about why this occurs, some say it is a bug but I think it is a setting I have missed..
Sample rate seems to be the main theory out there but I checked that the XR18 was sending 44.100khz and my Cubase project was also in 44.100khz. I did the playback through the XR18 out of the FOH speakers (17/18) and also had the same result later when using my Yamaha ASIO driver for the UR22 interface for playback (also set to 44.100khz).
Have you, or anyone else got any idea what setting (or bug) I have missed? Is this a compatibility problem with XR18 & Cubase (how did your recordings playback?)
I am using Cubase 10 pro on Win10.
Hey, wow. I went away and double checked my settings and located the problem!
I was going to delete my comment but I figure someone else might get the same problem I had. Not sure it is a default but I had the XR18 set to 48khz (not 44.1khz as I had thought). This setting is found in the "Settings" menu of X-Air app in the top right corner. Then in the "Audio/MIDI" tab and the first option "Clock Rate". Make sure this (either 48khz or 44.1khz) matches your Cubase project.
Duh....
Hey ,can you please help me out..my recorded project in cubase 7 is refusing to play at the same time when I add instrument to the XR18..both don’t work at the same time..any way out??...thanks
In which outputs i plug my speakers if i change the main L/R to out17 and out18 ?????
THANK YOU THANK YOU THANK YOU SO MUCH!
Your welcome Mikee535 very glad to help you.
Hello, Warren! I'm on PC and some people did complained that XR18 is very slow in multitracking USB tasks. They've wrote that it "glitches" or "pops" sometimes (obviously a buffer lag or kind of). Did you've experienced some of that? I'm thinking about playing some live sets using XR18 + a good notebook (and a tablet of course), so I'll be able to do any routing between analog gears and internal VST fx.
Is it suitable for that or I just better to don't think about it and stick to something else?
Also I plan to use it in home recordings as well. I have a big need of a multitrack USB sound interface so any analog devices can be connected and interconnected easily (without clumsy "hacks" that I use now with Audigy 2).
P.S. I'm going to buy it but it's a "though decision" (although it's not a cow or a car). Not telling about money limits, I have a limited space so any unused devices are like burdens.
Hey do you know how to get cubasis 3 on the iPad to work with the XR 18? Cubasis recognizes the XR 18, but will not load. I have tried using Audiobus and AUM, and am at the point, I don’t think it’s possible. Let me know if it is.
If i use the XR18 for live and want to record multitrack,but if i set the output inXR18 to ch17 and 18 there is no sound from the speakers ..please help
Thanks!!!!!!
How to open Audio Connections?? Please help
Can I activate more than 2 audio outputs in order to send a track to this output?
My goal is to use ready-made Stereo tracks in shows and send the metronome to a single channel without the audience hearing it.
Do I need a driver for the xair18?
I'm trying to use MORE OUTPUTS from Cubase for using guitar ampsims in a live setting...
But I'm ABSOLUTELY LOST in how to get more outputs from Cubase???
I want 2 ampsims to go out through Aux Out 1 and Aux Out 2 on the X-Air18.
But no matter what I do I get no sounds coming out.
Hi there, having trouble connecting my XR18 to the XAir Edit program on my PC. Trying to connect via USB and it just comes up as "Device: Not Connected". Any help would be appreciated!
Any help yet?
How are you making the physical connection between the XR18 and your computer since they both have a USB Type A rectangular connector? Are you using a cable with Type A connectors on both ends or some other interface? Thanks.
Hi Nate, I'm using a USB 2.0 Cable A-Male to B -Male 25 foot. The XR18 has the USB-B on it.
@@warrenfassbinder358 Thanks. I have XR16 and found out can't send digital audio over usb on that model.
@@natelee8721 you can but only stereo output, not multi track like the xr18.
Hi there, great vid very help full.
Im on cuebase le 8 and it will only let me add 8 mono inputs,
Can you help me with this.
Cheers
Hello Cornerednw, It looks like Cubase Elements and Le have a input bus limit of 8. There might be a workaround to get more, but only know of recording eight tracks and then remove the input from those tracks and record another eight.
Warren Fassbinder hi there,
Thanks for your reply.
I have followed your tutorial, two things i cant do are, i cant get the play back comming through my bxr18 and i down load the app and driver on to lap top , but when i shut the lap top down and swirch back on the app has gone.
Any advice would be welcome.
I wanted to use xr 18 as an interface to record my band live.
Thanks again,
Graham.
How's the latency? Thanks
What's the lowest latency you can get ?
i installed the driver but the asio doesnt pop up in ableton
👍👍👍👍
Could you please write the URL of the resources as text instead of just leaving them in the video?
Hello Ionut Brihacel will this work? www.behringer.com/Categories/c/Behringer/Downloads
Please how do i get the software
Hello PUULU MIX, It looks like Behringer changed the link to the downloads, here is the new link, you will have to drill down in the menu to find the driver. It will be under
Category [Mixers] Sub-Category [Digital] Product [X18] Type [Drivers] Sub-type [ASIO]
www.behringer.com/Categories/c/Behringer/Downloads#googtrans(en|en)
why my input in cubase so small?
Can you give me the recording software name.
Have you gotten the software
Hello Ka Wing Chan, the software used in the video is Cubase 10 Pro and can be found here www.steinberg.net/en/home.html
There are other versions of Cubase here as well as trial versions you can try out before buying.
new.steinberg.net/cubase/?_sp=57f4d26b-6328-44e0-b674-f7e0b15f2a42.1560533750806
Thank You
Can I do the same with the XR12 ?
unfortunatelly only XR18 works as audio interface. U cant do that with XR12 or XR16
Anybody experiences audio dropouts on PC? I have Win7, bought XR18 few days ago and struggling with a lot of dropouts. Even when playing video/audio from my PC (not talking about DAW). Firmware was updated, the new driver installed before this started to happen.
Hello KiR-3d, I haven't had any pops or slow downs and been able to make live recordings, I noticed that some usb chipsets cause these problems but I've had good results using the Intel based ones. To record live I set the XR18 to play back on channel 1&2 and this does not affect recording on channel 1&2, in Cubase I use the Control to control the output volume with the Mix knob. Try rolling back the driver. Do you still have the old driver? Let me know, also maybe we can do a remote session and I can take a look.
Thank You
Warren
@@warrenfassbinder358 Thanks for answering! I've uninstalled the driver few times, tried different USB ports. IDK, maybe it's about my chipset... I have the modern motherboard (for AMD) with PCI slot (it was the decision for my Audigy2 with the drive module). I'll check the chipset name...
My Win7 was installed with a kind of a hack because I use Ryzen 1800+ which is "not allowed" for Win7. Many people do this. Previously I've tried to update Behringer's Neutron firmware on this PC and it's failed. Their support couldn't help with this (all things was done properly, Zadig utility used and etc.).
Today I've used _this_ XR18 on my friend's old laptop (Acer Aspire, 2-core Intel) and it worked fine - no dropouts. At least I know that it's not the XR18's fault :)
@@KiR_3d It might be possible to upgrade to Win 10, get the Create Windows 10 installation media app and do a in place upgrade. Back up first. Ya your right could be the chip-set. I got a PCI usb for a AMD machine and that worked well, before going to a Intel Dell 990 i5. Hope it turns out well.
@@warrenfassbinder358 No... No Win 10 :)) Untill they've turn it to users. I've installed some important programs and really don't want to install some other OS.
Also I'm not sure (not 100% though) that I can back up with the current state. It's nativly impossible to work with USB support. It's cut on the installation procedure, so you can't enter anything to install as usual - it's their "protective" measure. So there is some program that "cheat" on that so I have the support. And then of course it works all fine... It will be a big frustration if I'll install Win10 and it will be giving the same problem on this machine.
It's interesting... Can Audigy2 give some problems when not physically removed? I've turned it off in the Device Manager (as a possible solution) but it's the same. Can it's drivers conflict with X-Air drivers?
What was your OS, your AMD CPU and the motherboard (or the chipset) when it was working fine with XR18?
metronome doesnt work
doesn't work it's a behringher issue, this video is wrong
Thanks man !