It ran much better upon the 2nd start - less mechanical noise. That Buhrer engine had been sitting for years with the cylinder full of water, and heavy rusting of the major parts. An absolute credit to the guys that decided to undertake such a mammoth task. I will never understand the 200 people who give this a thumbs down! Always nice to see the old stuff brought back from the dead...... Greetings from Australia.
You did a fine job. When I saw the inside of the injection pump, I have to say you had your work cut out for you there. That and the starter. Great results!
Absolutely excellent craftsmanship on the rebuild! Sounds almost as beautiful as it looks! Don’t know how you got the #3 valves to seat but they work now! Congratulations on giving her a new lease on life!
It is the original engine! In 1946 Vevey builded 100 tractors with Buhrer engine. All these tractors were exported to France. Buhrer didnt want these tractors to be sold in Zwitserland.
Anyone who has ever heard a Buhrer run would recognize that unique rattletrap sound no matter where they were. What I want to know is where the heck did they find the parts to rebuild that engine at? my husband has one of the very few that made it to America and is in the process of rebuilding it, he's having troubles finding parts.
There are Some Old stock parts available at the Buhrer factory Hinwil Switzerland. Got there Some gaskets and valves. The rest is machined by myself @work. Still very busy to get the rest of the tractor complete.
Gut gemacht! Wie viel Liter Caramba und WD40 sind hier versickert? Wie weit ist denn der Rest? Der Töff hat die schönste Karosse die ich je an nem Trecker sah! Sieht irgendwie sehr sportlich und schnittig aus, ein bisschen italienisch ;)
The second start sounded alot better than the first. Sounded like it was going to throw a rod or bearing on the first start. Guess it was a timing issue?
Very good work, it's great to see an old engine come back to life. I'm amazed that parts were available for this engine after so many years!
Sometimes the impossible is possible. Amazing restoration of what looks impossible. Congratulations.
A beautiful restoration from beginning to end. A credit to everyone involved. 🚜
It ran much better upon the 2nd start - less mechanical noise. That Buhrer engine had been sitting for years with the cylinder full of water, and heavy rusting of the major parts. An absolute credit to the guys that decided to undertake such a mammoth task. I will never understand the 200 people who give this a thumbs down! Always nice to see the old stuff brought back from the dead...... Greetings from Australia.
Love to see pieces of history brought back to life like this
Wonderful job rebuilding engine , look forward to the tractor body, frame and undercarriage being overhauled
Great job men!
Beautiful work! The before and after pics are so satisfying
That's a top notch job you guys have done.
Great rebuild! Now this is how it is done!!
I dreamed this work in my area, so much old things praying to come back to life
excellent work!! very good job bringing the old gem back to life!!
SED71 K
Amazing job, well done guys, congratulations!
You did a fine job. When I saw the inside of the injection pump, I have to say you had your work cut out for you there. That and the starter. Great results!
Nice job!! That Engine was Toast!
Prachtig stuk vakwerk om die oude motor weer zó mooi te restaureren, hulde!
Awesome work...bless you!
amazing you found new parts for it.....
Absolutely excellent craftsmanship on the rebuild! Sounds almost as beautiful as it looks! Don’t know how you got the #3 valves to seat but they work now! Congratulations on giving her a new lease on life!
Nice build , i see in the back my favorite bike , A Honda mb50
pięknie wyremontowany silnik i jego praca również piękna;)Pozdrawiam.
quite a smooth running design :-)
nice work, from the looks of those valves and how ruined that last combustion chamber was, i'm surprised you could get it running again, excellant
sasdlasokdalkfdalksfa
Well it was completely rebuilt.
i know that, but it looked damaged beyond recovery and loss of compression would be quite bad
nice work on the restoration!!
Technology has not advanced much has it these old motors are gems, no crap computer to screw you over.
Krásná práce,chlapci gratuluji.
love the workmanship, wish i could do it.
It is the original engine! In 1946 Vevey builded 100 tractors with Buhrer engine. All these tractors were exported to France.
Buhrer didnt want these tractors to be sold in Zwitserland.
how long you have been working on this project?
excelente trabajo!! son unos maestros, felicitaciones desde chile
Brilliant job,,,,,well done,,,, :)
Audi A6all
nice work !
Well done!
wow that allot of work..
beautiful job
Very very nice job
Good job
Beautiful! Thanks!
great job :D
They probably made them.. Nice job on rebuilding that baby.
Wow good job guy,s
Sounds great. 👾
awersome work guys
well done
Geweldig!
thanks
Anyone who has ever heard a Buhrer run would recognize that unique rattletrap sound no matter where they were. What I want to know is where the heck did they find the parts to rebuild that engine at? my husband has one of the very few that made it to America and is in the process of rebuilding it, he's having troubles finding parts.
There are Some Old stock parts available at the Buhrer factory Hinwil Switzerland. Got there Some gaskets and valves. The rest is machined by myself @work. Still very busy to get the rest of the tractor complete.
Thank you, valves and gaskets and rings are what he needs most, will get in contact with them soonest, will have anything else machined.
Loopt mooi heren! PS Leuke honda brommer :)
Gut gemacht! Wie viel Liter Caramba und WD40 sind hier versickert? Wie weit ist denn der Rest? Der Töff hat die schönste Karosse die ich je an nem Trecker sah! Sieht irgendwie sehr sportlich und schnittig aus, ein bisschen italienisch ;)
starts right up
The second start sounded alot better than the first. Sounded like it was going to throw a rod or bearing on the first start. Guess it was a timing issue?
A pin of the flywheel was hitting the frame in whitch the engine was temporary mounted
Wow! So old!
Wow new one on me.....
sehr guet
there was some serious pitting on the end cylinder head area.. probably a loss of compression by a small amount
Yeah. I would had cut out the old seats and pressed in new ones.
Is the engine newer than the tractor? I ask this because Buehrer made tractors and engines longer than Vevey did.
READY
Where did you find the valve cover?
Wow!!!
3:02 better turn on a fan!
Sounds like a Perkins 4 203
That center piston would worry me as well as the number 1 valve seals. Unless this is just a show tractor.
1:16 Linkin park ❤
LS SWAP IT
i gave it a like, but your video could have used less still pictures and more video of the work done on it..
MineCraftJunky28 .
Watch czcams.com/video/deGFk5mJuV4/video.html first test drive!
I dreamed this work in my area, so much old things praying to come back to life