How To Compression Test a Motorcycle Engine
Vložit
- čas přidán 23. 07. 2024
- How to do a compression test on a motorcycle engine.
How To Replace Spark Plugs Video:
• How To Replace Spark P...
00:00 Introduction
00:19 Getting Started
01:03 Remove Spark Plugs
01:18 Compression Test Tool
02:00 Installing Test Tool
02:12 Hold Throttle Open
02:32 Testing Cylinder #1
02:59 Testing Cylinder #2
03:20 Specs
03:56 Low Compression?
04:11 Piston Ring/Cylinders
04:33 Wet Test
05:06 Valves
05:36 Head Gasket
05:46 High Compression?
06:08 The End
DISCLAIMER!
Due to factors beyond the control of Nick Buchanan Racing, I cannot guarantee against improper use of this information. Nick Buchanan Racing assumes no liability for any property damage, injury, or death incurred as a
result of the information in this video. Use the information in this video at your own risk. Nick Buchanan Racing makes no guarantee of any particular result that can be achieved using the information in this video. Nick Buchanan Racing recommends taking all necessary safety precautions when working on motorcycles, working with tools, and operating motorcycles.
Nick Buchanan Racing recommends following all manufacturers recommendations and local laws. Any damages, personal injury,
or death, as the result of the information contained in this video is the sole responsibility or the user, and not of Nick Buchanan Racing. I am not an expert technician or qualified instructor of any kind. This video is for entertainment purposes only. - Auta a dopravní prostředky
The best video I have ever watched for the compression test. Clear and useful diction is in excellent harmony with nice picture, which are so informative for my work. Thanks so much.
Youre welcome! Im glad it helped. Good luck and hope your engine is in good shape👍
The best so far with illustrations
Thanks man
Awesome video! Thank you!
simple clear explanation, thank you!
Youre welcome, thanks
Great job 🙏
Thanks bud 💪🏽
@@koyval22 youre welcome
Nice video sir
Thanks. Hopefully it helped you out!
Thanks for this video. I'm trying to figure out a problem on my Ural and plan to do a compression test. This made it really clear how to do it! Any plans on doing a video for a leakdown test?
Youre welcome, glad it helped. No plans for leak down test video in the NEAR future. Maybe someday
Rocky mountain atv is a channel that has a decent leak down test videoi think
When doing cylinder #1 do I leave the spark plug on cylinder #2 obviously with the boot off the spark plug so there is no spark
You should puĺl all the plugs out at once. That way there is no compression in the other cylinders that arent being tested, this will save your battery/starter from working too hard since youre only building pressure in the cylinder thats being tested. Thats always how ive done it.
Please tell me which is the best Compression gauge for Motorcycles
Check out motion pro. The guage I have is from advance auto parts. Motion pro makes really good tools
what about this. my 63m block for aerox have a lining
Do what?