How to lay porcelain tiles onto a concrete patio

Watch how to lay porcelain tiles, slabs, pavers and natural stone onto pre-existing external concrete bases.
BAL's new Level Out external leveller helps level uneven or damaged concrete bases prior to tiling or laying porcelain or other tiles.
BAL Level Out can be used from 2mm to 20mm in bed depth, and is ready to tile in only 3 hours.
Tiles can be fixed with BAL XL Floor One - a thick-bed pourable floor tile adhesive.
0:00 - Intro
0:31 - Preparation
0:51 - Mixing BAL Level Out
1:27 - Applying BAL Level Out to concrete
2:03 - Spike Rolling
2:46 - Laying tiles onto levelled concrete with BAL Pourable One* - Now superseded by BAL XL Floor One.
3:28 - Grouting with BAL Terrace Grout
📺 Watch Next Videos
How to lay slabs onto Type 1 MOT -
• How to lay 20mm porcel...
♦️ Subscribe for more handy videos -
czcams.com/users/BALTiling?sub...
🤝 Connect with us:
Twitter - / baltiling
LinkedIN - / bal---tiling-solutions
Facebook - / baltiling
Instagram - / baltiling

[@suzybearheart530]

I've been looking for a way to add some curb appeal to my front yard and back patio so this is perfect. Thank you so much for sharing!

[@BALtiling]

You are welcome!

[@paulr1784]

Word of the day....ACTUALLY

[@castanedagus]

Can I do this process over a stained concrete patio?
Greetings from Los Angeles

[@eefunhuang6958]

I think using mix of cement and sand for leveling layer and do leveling together with tile installation might be easier

[@MrBucitis]

They are showing how it needs to be done...you can do with sand/cement/slurry mix, as it's one of the ways how novadays people are doing as it's cheaper. I still do concrete base and porcelain is going with exterior tile glue.

[@soluskarma]

Do you have to tile 3 hours later? Or can you come back and tile any time?

[@user-xc7gb8gj6r]

Can you lays porcelain tiles over flagging ?
The flags are solid, level.
Could I screed over the flags then lay tiles ?

[@dwayne6530]

L

[@christinedin8515]

can we use the leveller over council slabs then tile with 10 mm Porceline tile ?

[@BALtiling]

It's only suitable for concrete bases I'm afraid. The council slabs would need ripping up and then a new concrete base laid for the 10mm porcelain.

[@jonny5alive]

@@BALtiling how deep would the concrete base need to be?

[@stuartfarrell6729]

is this available in the USA

[@tomnapper101]

would use self-leveling you with spend too much time put it down 👎 spr concrete after cleaning it then I would layer a dura base mat with a 8 m tiling trowel please try it you find it so much easyer 👍

[@DR.6an6al-IRAQ]

why you grouting the tiles and the grout lines?!

[@BALtiling]

You grout the lines and fill the joints with a cement-based grout, then clean off any excess off the face of the tile

[@garyfardon8841]

The tiles were already grouted actually.