Phatmoto rover with a predator 212cc engine
Vložit
- čas přidán 31. 12. 2020
- Phatmoto engine swap with a 212cc predator using an idler gear set up and new engine mount. Also upgrades including a new seat, taller handlebars and rear rack.
contact: ksheen004@gmail.com
Brilliant! Using the gearbox to reverse the rotation is Brilliant! Gonna do the same on my build!
Looks great. Engine rotation. Great
Awesome build. Thanks for sharing.
love the way you did it , very clean looking ...looks really good
Thanks a bunch!
@@kevinsheen5862how fast is it
Pretty slick setup!
thank you
Looks good, Kevin you need to lace you up some wheels. Straight pull spokes and some fat tires... I have an extra set of rims 29 front 26 back
Awesome job.two thumbs up.keep up the cool videos
I have the same headlight. I got two bolted in the same hole with the bracket from one light nested inside the other light bracket.
later that day from his hospital bed he had this to say,"yeah I am quiet dumb,should have put some chain guards on the thing,but like i say Im a 100% dumb ass"
Fascinating that the motor runs in reverse like a marine engine which could be caused by reverse engineering.
Which you brilliantly engineered a piece that clearly over came this .
Congratulations with this piece you are offering for sale and much success .
My plan is to install a 212 to help pull my bicycle camper trailer. Stock motor modified has trouble pulling hills.
Kudos man on the bike build but remove that governor so that it may accelerate faster than 45 mph😅😂✊🏾✊🏾✊🏾✊🏾
But I definitely would love to buy a kit from you
Gearbox built instruction needed ! Is it just a part of the juckShaft kit?
Thats one badass bike . how's the bike holding up ?
Any update on the sprocket kit?
I think I'll need the motor mount and the gear box.l have a phatmoto all trerrnain.
I have a fat tire EBIKE a big one it’s 29 inch now do you think it’s possible and good vid bro peace from the northeast BEARDEDFISHERMAN!!
420
Looks goofy I see those upright
How much for you to put one on sir like that if I buy the motor
How did you make gearbox?
I feel like your shorts are gonna get sucked in with those chains lol
Can you turn the idle down. Is the clutch disengaged?
Could you tell me where you got your engine mount and what the part number is thanks
How much would you sell the same motor for?
I want the kit, lets negotiate.. i purchased the phatmoto 79cc and was already thinking 212cc predator
Hey Kevin, very interested in buying a kit from you, where can I reach out to you to discuss this?
I'm looking to build one with a 196cc Diesel, those engines also have a slanted cylinder.
I'm doing the same. Have you finished yours?
@@amharrach No The valve cover hits the frame, I'll have to do quite a bit to make it fit.
Ive got mine 99% done. Engine fits fine for me, just have it in "backwards" so to speak. Similar to this video
How did you get it so quiet?
great bike, i want to upgrade my 2022 black phatmoto rover with one of your kits how much?
Are you selling the kits?
Why is it idling at 2500rpm?
Yes amigo i'm like your job how much is the cost? I'm live in Tijuana mx
How you get the rear rack to fit
Gotta death wish with no chain guard?
We will call the neutered incident of 2022
Hello. how much for the part that is on the drive shaft
How much would a kit cost
wow I love it what was the total cost ?
do u sell the set up
What is it’s top speed on flat road?
How much for the kit??!
Hey this is is amazing I keep sharing it in my group but forget to comment here. Amazing job. Could you tell me where you found the gears and how many teeth, .. please. This would help many many of us. And once again great job.
I'm interested in the kit to use the gear
Hello david, I really need 25 commitments to make the kits , read some of my other comments to other people. Basically if I have to send this to a machine shop the machine and minimum order of 25 has to be met in order to get a good price. Otherwise I'll be around 600 if I have the machine the whole thing and provide all the parts
How much for kit ?
All I see is an added failure point with those gears.
Is it hard to do
Sweeeeeeeeet!!!
I want to build one
How much for that engine mount? where can I get it from?
Hollywood 16 Urinal Northridge 8 No Urinal
Obviously lost your drivers license lol
The Backwards man
Hey brother that is very nice the way you did that...iv got one just like your red and all and Iv got a 212 on mine also but it's turned the other way and I'd like to turn it around like your is...if you are going to make the kit let me know everything about it and I'll buy one for sure.. message me back and I'll give you my information to pay you for it
Thanks for your interest. Like I mentioned on my video I made the first prototype so I'm trying to get it priced out at some machine shops since I don't have the time to do all the machining for everyone I sell. I'll let you know soon I'm working on a way of not having to drill the frame. That's coming pretty soon. I'll let everybody know as soon as I have a price for the kit
@@kevinsheen5862 ok cool buddy....thank you so much for getting back to me....I'm sure you have a lot of people wanting a kit...I know I hate the way mine sits on the frame and my valve cover is right on the fuel line nipple and keeps hitting it and cutting it I finally mounted a nother gas tank on it for now .. thanks again....I can't wait to hear from you on kit I'll definitely buy one
I looked around for machine shops to do it but they want too much money so if I'm going to do myself it will cost $425 this will include the motor mount and the conversion kit including all bearings and screws and nuts that you need
I’m thinking hard about buying me one of these bikes! If I do I definitely want a kit!! You did a great clean build!! How is the jack shaft holding up that reversed the motor rotation? Thanks
Can you please let me know the price for the kit I got the bike and the engine already thanks
I'm sorry for the delay I've been working to get a machine shop to do this for me since I did the first prototype but the price is way too high. If I'm going to have to do it myself I charge $425 which includes the motor stand and also the conversion kit with all bearings and parts needed
sorry for the late reply, i was traveling for work. and then i got sick. I checked with some machine shops around me and the kit will cost a lot if i just make one or two. the price becomes more effective when I order 25 kits . if I can get 25 confirmed with deposit , then the kit will cost around 450. it will include everything except the motor. if I have to make it myself ...it's not worth my time to do all the machining.
Amigo me gusta tu invento como puedo comprar las piezas para instalar la cadena del motor al jackshaft esa piezas puede mandarme las dígame el precio vivo en Tijuana b.c mx
I need that kit. .
0:47
Where can I get that set up ?
Working on creating a kit for potential buyers I will let everybody know soon through another video.
sorry for the late reply, i was traveling for work. and then i got sick. I checked with some machine shops around me and the kit will cost a lot if i just make one or two. the price becomes more effective when I order 25 kits . if I can get 25 confirmed with deposit , then the kit will cost around 450. it will include everything except the motor. if I have to make it myself ...it's not worth my time to do all the machining.
We really need this my felt faker has this problem now it will sell out
@kevinsheen5862 can I get a kit and let me know how much it cost?
what it cost to build?
Please look at the videos I put out. I'm working on a kit... I will let you know soon
Sorry for the delay I was trying to get machine shops to do the kids for me but the price is too high. If I'm going to do it myself the kid will cost $425. This includes them motor stand and the conversion kit
sorry for the late reply, i was traveling for work. and then i got sick. I checked with some machine shops around me and the kit will cost a lot if i just make one or two. the price becomes more effective when I order 25 kits . if I can get 25 confirmed with deposit , then the kit will cost around 450. it will include everything except the motor. if I have to make it myself ...it's not worth my time to do all the machining.
Umm wtf 😳 why did he baby it ??? Didn't even show any speed
Lol I guess once you go over 50cc you build this
Yeah and you spent over $700 dollars for that whole bike
So what if he did!is that a bad thing? It's his money he can do what he wants with it . For some reason, there's always a hater around talking about how much cash someone spent! Are you even employed ?
Bikes are expensive thats pretty cheap