IoT based projects for final year using NodeMCU ESP8266 Blynk with Sensor - Smart Home 2022
Vložit
- čas přidán 7. 09. 2024
- In this smart home project, I have shown how to make a NodeMCU ESP8266 IoT-based project for the final year using Blynk IoT with sensor and IR remote control relay. The ESP8266 can save the last GPIO state and you can also control relays without internet from IR remote and manual switches.
To try out the FREE trial version of Altium, click here - www.altium.com...
For this home automation project, I have used the FREE plan of the Blynk IoT platform and explained all the steps to use the Preferences library to save the last GPIO state in the ESP8266 flash memory.
During this Internet of things tutorial video, I have covered the following topics:
00:09 Quick demo for this NodeMCU Blynk IoT Project using sensor.
00:52 Timer & Temperature control relay with Blynk Automations.
02:27 Required Components for the Blynk ESP8266 project.
02:39 Circuit of the NodeMCU ESP8266 control relays.
03:05 Set up Blynk IoT cloud for ESP8266.
03:47 Add devices in the Blynk IoT cloud.
04:08 Source Codes for Blynk ESP8266 smart home project.
05:57 Steps to use Preferences library for ESP8266 Project.
08:38 Set up Blynk IoT App to control relays.
Required Components for the ESP8266 internet of things project.
1. NodeMCU ESP8266
2. 4-channel 5V SPDT Relay Module
3. TSOP1838 IR receiver (with metallic casing)
4. DHT11 temperature sensor
5. Switches or pushbuttons
Amazon India Affiliate links:
NodeMCU ESP8266: amzn.to/3fJA4EG
4-channel 5V Relay Module: amzn.to/2BQ5Y3o
Amazon United States Affiliate links:
NodeMCU ESP8266: amzn.to/2WoR2A2
4-channel 5V Relay Module: amzn.to/3r2HuJ4
Help my projects on Patreon: / techstudycell
Feel free to donate any amount: paypal.me/sdaspay
Download the Code for the ESP8266 Blynk IoT project:
iotcircuithub....
Previous Videos:
Previous Blynk NodeMCU Project: • ESP8266 Project using ...
Create Blynk Template for Automation: • IoT Project using ESP3...
Blynk IFTTT Google Assistant: • ESP8266 Project using ...
Steps to program NodeMCU with Arduino IDE: • Programming NodeMCU ES...
Important Links:
New Blynk IoT Cloud: blynk.cloud/da...
Preferences library tutorial: iotcircuithub....
Download PCB Gerber file for NodeMCU control relays
drive.google.c...
Important points:
1. You can turn ON/OFF the automation anytime from the Blynk IoT app.
2. IR receiver sensor must have a metallic casing. Otherwise, you may face issues while trying to get the Hex code.
3. The Blynk Automation will not work if the NodeMCU is not connected to WiFi
4. You can control relays with switches & IR remote if WiFi is not available.
5. Install the correct version of the ESP8266 board and libraries as mentioned in the code.
6. If you use latched switch, then during reset, switch-2 (D3) must be turned OFF.
7. Please watch the complete video, otherwise you may face some issues.
**Please take proper safety precautions while working with high voltages.
For this final year IoT project tutorial, I used one of my previous NodeMCU projects and added EEPROM features using the Preferences library.
In this NodeMCU project, I have explained all the steps to use the Preferences library for any ESP8266 Project.
You can control the relays without internet from the IR remote and manual switches. NodeMCU will automatically connect with the Blynk cloud when the internet comes back.
You can use any IR remote to control the relays, just get the HEX codes of unused IR remote buttons, and control the appliances with those buttons.
This smart relay module PCB can be used for different ESP8266 projects which I will cover in upcoming videos.
#iotprojects #esp8266 #smarthome
-----------
Thanks For Watching...
✅ SUBSCRIBE ✅LIKE ✅SHARE ✅ COMMENTS
Find out more IoT projects: iotcircuithub....
Facebook: / techstudycell
Instagram: / techstudycell
Telegram: t.me/techstudy...
-----------
-----------
WARNING:
This video is for demonstration and educational purposes only.
Each demonstration presents risks and hazards that must be fully understood before attempting.
And should be performed only by professionals
-----------
Other useful IoT projects:
Latest ESP32 projects playlist:
• ESP32 Projects
Latest NodeMCU projects playlist:
• NodeMCU Projects
Arduino Home Automation Projects playlist:
• Arduino Projects
Big Brother ,
Touch switch [ TTP223] can be installed in place of normal switch ????????????
ye project bhi awesome hai mene try kiya zabardast work kar raha hai bus kami hai tu fan speed control ki
Sir it does not compling the sketch. I don't know what problem that is . I have downloaded all the library that you have shown . i have using the new version of arduino ide 2.0.0 .please rectify this problem sir
Right plz solve this
Please make a video on door security system using nodemcu and ov7670 camera module
Excellent Bro. Expecting you to incorporate preferences.h in your earlier code without 3rd party iot providers.
Please make project on a socket also design its PCB
amazing, even better if you use wifi manager
I dont know why "Blynk Not Connected". Please help me. Thank you so much
Can i change gpio pins D1 2 3 4 for relays and for switches D5 6 7 8 is that work proper? And sd2 its not work with ir recvier which other pin is better for ir and dht. Can i use rx or d8 for ir and sd2 or 3 for dht sensor.
Dear Sir, if we connect inductive load then the controller will hang......? It has been observed that many controllers hang as soon as the load is connected.
Sir everything working fine. But problem is that when node mce disconnected from wi fi it didn't connect again it self to wifi. It has to restart to connect wifi. I am using code which uses blynk edjent library. Please resolve this issue. Thanks
Excellent project sir with EEPROM option. Can you please add one dimmer also ?
working on fan regulator. Thanks
@@TechStudyCell yeah use capacitive method not triac once
@@TechStudyCell i am waiting for long time
bro make a same project but aslo inculde fan speed control system 2 relays for lights and relays for fan speed control
Nice video bhai 👌👍
Thanks
Hello sir how are you . Sir coming error (error compiling for board nodemcu) but I have updated board and blynk library. How to solve this sir . please reply me 🙏🙏🙏🙏🙏🙏🙏 please sir I am your big fan sir please reply me 🙏🙏🙏🙏🙏🙏
How to use another esp module like esp32-s3 this type module assume pin changes
Sir can you please add ota code upload feature in your codes so we can upload code on esp board wirelessly (No Usb)... I have installed esp32 project in my wall electrical box... So to update it your new codes I have to take out all the wire connection again and again... It would be great if you can add AsyncElegantOTA like Library... Thank you
Доброго вечера!
Блин_К) ты КРУТ !!!
Bro pls reply can i add this eeprom to that google assistant and Alexa project..
Today I tried the code and I wanted to change hex code but the given hex decoder code is not displaying anything in serial monitor tried other code and it worked so i replaced it . automation code is not detecting code also I placed hex code after 0×
error: variable or field 'button1Handler' declared void
i want to control my water heater gyzer on base of IOT can you help me sir
Nice..
Can I use rf reciever in place of ir reciver?
+ coding for lcd 16x2 please🙏
Please video home automation system firebase
When I try to make project with IR,in seriel monitor one error shown,why?
use of decode(decode_results) is deprecated. use decode() instead eeror this error sir
Please reply
please ignore this error. It will not cause any issue for IR remote control.
can u do new project like security door sensor with password turn on turn off your all project was same with different with new feature and application
can those switches be used as normal switches in case the nodeMCU or any other components fails?
No
And D2 is not working ie switching
Switch ka connection karte hi low power ho jata hai or node mcu or relay bandh ho jati hai
Must ❤️
Sir pls mqtt ke bina kese chlega Alexa
Status update without wifi ?
where can i find the auth token? i open the blynk in my pc and create a account but i can't find the auth token
Please watch the complete video
Please make a wattapp group
Sir I am your subscriber and I am watching your all videos
Can you make a project for bike using
0.91 OLED display fingerprint sensor and rfid mfrc522
Ignition on and off, self and engine kill/dis kill system
Please sir make this project i am waiting
Your projects is awesome
Noted. Thanks
@@TechStudyCell sir can you make this project
@@TechStudyCell sir OLED display size 0.96 inch
Im use this code superb ❤️❤️❤️❤️
I want to all off
How to code all off
Full details
Hi bro I want this PCB Design With assembled components I will give the amount for this can you please give
Woy coding nya gak bisa diupload ke node mcu nya help😭😭😭😭😭😭😭😭😭🙏🙏🙏
Mqtt ke bare mebi btao adhuri video ke nambar a bao
Aaaaaaaaaaah why no ota wifi pass update😭😭😭
Will try to add this features also.
@@TechStudyCell i dont think its possible cause if u use eeprom for any other purpose it will clear wifi credentials and write other data instead , but i belive u have many other solutions ,and one i think is to use external eeprom ic for relay state and internal eeprom for wifi credential updates 👍love ur videos🙏
Sir hindi me vido banai plise
Bharat ki bat mebi bat Kiya karo
Sahi se btao
Galat mat btao bhai
Yeto galat hai