Hi Kevin, just wanted to thank yu for your videos, thanks to your detailed instructions i was able to perform a clutch replacement on my neigbours caddy 2013 1.6 tdi 5 speed manual.During this it was -10 but if you work and sweat a little bit you dont feel it.I have greate respect for you doing this in those envoirements, i needed 10hrs for this clutch , nomally as a full time job i would be able to do a swap every second or third day to regain power levels. I wish you the best for the future.
This mechanic clearly works-out judging by his strong athletic and physical appearance which would certainly be a great advantage when undertaking this element of work as it looks very labour intensive and certainly not for the faint hearted or physically challenged but I like others am going to give it a go after analysing this very informative tutorial despite no commentary which some CZcams up-loaders prefer to work in silence and may I say a very big thank you to the 'masked mechanic' for this great instructional and informative video, but he makes it look so easy and I am under no illusions the job will go as this smooth for me! And once more thank you again sir for taking the time and trouble to pass on your mechanical skills/knowledge to the world 👍
Just done dual mass flywheel and clutch on 07 passat 1.9 with 215000 miles on it. This video was priceless. Saved me £500 labour. Took my time and with the other jobs, slave cylinder, cv boot, ball joint, anti roll drop links and engine oil change it took the day. Brilliant. Keep up the great videos. Efforts greatly appreciated. By the way, You made the gearbox look much lighter than I did!
Absolutely stunning work. Master of Arts and engineering in my view. Thinking of doing mine…you just gave me confidence. Hope it remains there when I’m ready.
Just finished replacing my transmission and clutch using this video. Super helpful, learnt a lot. Thanks mate. Now I gotta figure out why it won't start 😂 maybe I forgot to plug something back in
Thank you from Germany for this great video. I did change the clutch incl. dual mass fly wheel following this video. Took me a „little“ bit longer than 53 minutes, but it worked out. Two remarks: for a self-made change it might be easier to change the clutch together with the dual mass fly wheel pre-mounted, for example from Sachs. Than you don’t have to use the centering tool. And the second one at 34:15 you first mount the bracket for the tube to the slave cylinder and than at 36:10 the holder for the gear shift. I think the other way around is better, as you cannot reach easily the back-end screw due to the bracket of the tube for slave cylinder in front of it. But again thank you from the other side of the Channel. This video saved me a couple of euros.
loved watching this one kevin not a bad looking caddy that lol😂, hey the bottom ball joints put up a bit of fight! they did that for me to when I changed them also i like your new Milwaukee good for the smaller jobs, thank you for what you did for me kevin. Thumbs up from me buddy👍
Great job Pal, ive just changed the driver's side drive Shaft on my car, same engine and gearbox i think? BXE. total nightmare, hahaha. You have some cool tools there but it's not easy still i know, being under the car on your back like that. I left putting the output flange seal's on and just topped the gear box up with tranny fluid. Ah well she'll keep fighting me along the way but won't beat me completely. Haha.
Thanks Harry. It’s been well received and very much appreciated. You can co tact me anytime if there’s anything technical you may require some pointers. Don’t hesitate.
Great stuff Kevin thanks for sharing 👍👍👍 That gear selector you always remove @ 17:09 in the video even though it’s splined I presume it only goes back one way?? Sometimes you have to shock it with long half inch drive extension when the 13 nut is removed…. Would like to see a close up shot of it if you think of it the next time you do one of those clutch’s, many thanks
Quick question, why did you apply red rubber grease on the bell housing bolt points? Also as far as i know red grease is for parts that contains rubbers like O rings etc..
I see you are doing regularly clutch replacement on VW family. Are you sollicited sometimes for clutch or flywheel replacement on DSG6/7 gear box ? Very nice video, as usual 👍
Is it worth replacing the crank angle sensor or if it's working best leave it alone? After watching your videos for years I'm ready to replace my clutch and dmf. Parts have arrived tools are laid out ready!
Hi mate when your doing a clutch do you also replace the release bearing ? Also do you inspect the flywheel before replacment of the clutch ? If you think the flywheel is no good do you recommend a replacment flywheel also or do you just bolt the new clutch on ?
You not human you never heard ya groan moan or even swear 😂😂😂 Memory of an elephant 😂😂 remembering where all the nuts and bolts go back 😳 and wearing two pair of gloves how do ya feel anything 🤔 Excellent video and great job Kevin lad 👍👍👍👍
great video, super helpful. But what's the purpose of removing the driver side driveshaft cup? and therefore having to drain the gearbox oil? does it just give you more space to remove the gearbox?
A good tradesman makes there job look so easy so much so you make it look like I can do this with my eyes closed, but I won’t try🤪I would use you at the drop of a hat what area do you cover? Im I’m Chelmsford essex & need clutch & DMF changed.
@@WMCS sweet thanks for the reply, have most of the stuff ordered now and permission to use the workshop at my work, thanks again for the video, no one doing a service like you do where I'm living!
Hi Kevin! Why don't you expand your buisness also to exchanging cam belts. Many car owners who have bought their car second hand, worry about not knowing if earlier owners have done this.
Chris I drain the oil because I need to remove the flange. Leaving the flange in situ becomes a bit of a problem pulling the gearbox out. It always seems to anchor itself at the back of the flywheel. Now it will come out but with a lot of faffing about.
@@WMCS Thanks Kevin for your response. The level of detail in the filming and camera angles showing the necessary steps to complete the work is excellent. Thoroughly enjoy watching your videos. The rubber matting you use makes an excellent work area when working off the cold and wet floor. Atb Chris
What's this mounting tool for sac clutch. I've watched a number of clutch changes and only seen the centering tool. If this isn't correct, how come the clutch works at the end
Hi Kevin, just wanted to thank yu for your videos, thanks to your detailed instructions i was able to perform a clutch replacement on my neigbours caddy 2013 1.6 tdi 5 speed manual.During this it was -10 but if you work and sweat a little bit you dont feel it.I have greate respect for you doing this in those envoirements, i needed 10hrs for this clutch , nomally as a full time job i would be able to do a swap every second or third day to regain power levels. I wish you the best for the future.
This mechanic clearly works-out judging by his strong athletic and physical appearance which would certainly be a great advantage when undertaking this element of work as it looks very labour intensive and certainly not for the faint hearted or physically challenged but I like others am going to give it a go after analysing this very informative tutorial despite no commentary which some CZcams up-loaders prefer to work in silence and may I say a very big thank you to the 'masked mechanic' for this great instructional and informative video, but he makes it look so easy and I am under no illusions the job will go as this smooth for me! And once more thank you again sir for taking the time and trouble to pass on your mechanical skills/knowledge to the world 👍
Thanks for taking time to leave a review.
Very much appreciated 🍻🍻
Just done dual mass flywheel and clutch on 07 passat 1.9 with 215000 miles on it. This video was priceless. Saved me £500 labour. Took my time and with the other jobs, slave cylinder, cv boot, ball joint, anti roll drop links and engine oil change it took the day. Brilliant. Keep up the great videos. Efforts greatly appreciated.
By the way, You made the gearbox look much lighter than I did!
Absolutely stunning work. Master of Arts and engineering in my view. Thinking of doing mine…you just gave me confidence. Hope it remains there when I’m ready.
If you are thinking of it and have the tools then go for it.
Just finished replacing my transmission and clutch using this video. Super helpful, learnt a lot. Thanks mate. Now I gotta figure out why it won't start 😂 maybe I forgot to plug something back in
Be certain the earth strap is back on the bolt. And the starter motor plug is correctly and fully pushed back in.
Great guide, used it to change the clutch and flywheel in my van recently, very informative.
Thank you from Germany for this great video. I did change the clutch incl. dual mass fly wheel following this video. Took me a „little“ bit longer than 53 minutes, but it worked out. Two remarks: for a self-made change it might be easier to change the clutch together with the dual mass fly wheel pre-mounted, for example from Sachs. Than you don’t have to use the centering tool. And the second one at 34:15 you first mount the bracket for the tube to the slave cylinder and than at 36:10 the holder for the gear shift. I think the other way around is better, as you cannot reach easily the back-end screw due to the bracket of the tube for slave cylinder in front of it. But again thank you from the other side of the Channel. This video saved me a couple of euros.
Thanks for the feedback
I'm mechanic but watching i love watching vedeos👍👍👍
Just removed my transmission with this video. Super informative
new to your channel luv the vids you do and great work on the caddy👍👍
loved watching this one kevin not a bad looking caddy that lol😂, hey the bottom ball joints put up a bit of fight! they did that for me to when I changed them also i like your new Milwaukee good for the smaller jobs, thank you for what you did for me kevin. Thumbs up from me buddy👍
Buen trabajo, buena herramienta. Saludos desde colombia.
Thanks for taking the time to make this video 👌great work
Cómo siempre q buen trabajo, saludos desde México
Another cracking job Kevin 👌
Awesome walk through and attention to detail
Hi Kevin great job as usual all the best Shaun
Watched a few of your videos, always brilliant! i've just bought myself a caddy and if the the clutch packs in have this video on backup! thank you!
Im dreading the ULEZ charges coming, i own a VW golf wagon 1.9tdi pd.
Great video, as always.
Another great video by the genius
Great video. Best I've seen
Great job Pal, ive just changed the driver's side drive Shaft on my car, same engine and gearbox i think? BXE.
total nightmare, hahaha. You have some cool tools there but it's not easy still i know, being under the car on your back like that.
I left putting the output flange seal's on and just topped the gear box up with tranny fluid. Ah well she'll keep fighting me along the way but won't beat me completely. Haha.
You are the best mate!!!
Nice work i have touran 1.9 have you change one on these before. looks very similar going to attempt it myself. Looks quite straight forward 🤞
Thanks. Top man and a small token of my gratitude
Thanks Harry. It’s been well received and very much appreciated.
You can co tact me anytime if there’s anything technical you may require some pointers. Don’t hesitate.
Many thanks@@WMCS
Hi Kevin you are Top 👍👍👍 hello from 🇮🇹🇮🇹🇮🇹
Great stuff Kevin thanks for sharing 👍👍👍
That gear selector you always remove @ 17:09 in the video even though it’s splined I presume it only goes back one way?? Sometimes you have to shock it with long half inch drive extension when the 13 nut is removed….
Would like to see a close up shot of it if you think of it the next time you do one of those clutch’s, many thanks
Thanks for the amazing video my friend
Your work, knowledge and experience is amazing. Did you enjoy puzzle books growing up? Thank you very much.
Very helpful video. Thanks
What a machine…. 100% ex SAS . This guy is unbelievable
Quick question, why did you apply red rubber grease on the bell housing bolt points? Also as far as i know red grease is for parts that contains rubbers like O rings etc..
VW 👍💪 have a good weekend my friend
I see you are doing regularly clutch replacement on VW family. Are you sollicited sometimes for clutch or flywheel replacement on DSG6/7 gear box ?
Very nice video, as usual 👍
Gute arbeit!
From Algeria....respect 🎩
Muy buen trabajo a pesar de no tener las condiciones de un taller con elevador
well done , hard working man. just to ask . how is your charge as a mobile clutch man compeer to the garage?
all the best
Приветствую вас! Удачи вам! 👏👌💪
You got the 3/8 compact impact gun! Would you recommend? Is it light? I was thinking about getting it.
Hi.My favourite of guns is Ingersoll-Rand 1/2 20v max open power 2040Nm.Recommended👍
Eres un crack...si eso es sin hablar que tal si lo hiciera..👍👍👍👍
Is it worth replacing the crank angle sensor or if it's working best leave it alone? After watching your videos for years I'm ready to replace my clutch and dmf. Parts have arrived tools are laid out ready!
Just out of intrest Which car would you say has been the hardest and easiest from what you have changed.
hi could you let me know the part number for the luk clutch kit i have the same van same year thanks.
YES, now this interests me as i had the same model van.
What’s the part number of the dm flywheel and clutch? Please, there are a few choices online I’m a bit confused! Mine is a 2010 bls 1.9 tdi maxi
It’s ok I found it, and got it all done thanks to this video!
Hi mate when your doing a clutch do you also replace the release bearing ? Also do you inspect the flywheel before replacment of the clutch ? If you think the flywheel is no good do you recommend a replacment flywheel also or do you just bolt the new clutch on ?
Always replace the full kit. If it has a DMF replace it regardless
Increible como trabajas , like like like LIKE LIKE LIKE
Grande Williams top dove abiti
Hey William quick question are the drive shaft bolts on these VW's a stretch type ?
Yes they are. If not careful they will keep going till it snaps
Me again 😂 what ya call that you put the gear box fluid back in with. Cheers 👍👍
Is there any part of the video that shows just the clutch switch and how to remove it? Thanks
There’s more in depth videos showing it on the channel.
great job as that a duel mass
good job, it's hard when it's heavy gearboxes. If you can tell me how many Nm is your impact wrench. Thank you. Good continuation.
1356 Nm of fastening torque and nut-busting torque of 1898 Nm
You not human you never heard ya groan moan or even swear 😂😂😂
Memory of an elephant 😂😂 remembering where all the nuts and bolts go back 😳 and wearing two pair of gloves how do ya feel anything 🤔
Excellent video and great job Kevin lad 👍👍👍👍
👍👍👍 bravo
excelent 😁
How much did this actual replacement cost in in the video mate
Fantastico
Hi Kevin 👋, how do you know if you need to bleed the clutch or not? Many thanks.
Its obvious man... You can feel it on the clutch pedal
@@NoPainNoBrainNoShame OK 👍, if it works don't overthink it 🙂
Itu transmisi nya di angkat sendiri memang ga berat gitu?
At minut 7 ,why do you remove that part from The gearbox,you can't do it whit it on The gearbox?
I ask beacause i need to do The same operațiun.
This flange will anchor itself behind the flywheel. And that’s the last thing you need with the gearbox hanging.
Is this the 5 speed you also get in the SEAT Altea with the same engine?
Very similar
great video, super helpful. But what's the purpose of removing the driver side driveshaft cup? and therefore having to drain the gearbox oil? does it just give you more space to remove the gearbox?
yes the driveshaft cups can get in the way 👌
A good tradesman makes there job look so easy so much so you make it look like I can do this with my eyes closed, but I won’t try🤪I would use you at the drop of a hat what area do you cover? Im I’m Chelmsford essex & need clutch & DMF changed.
Mick thanks for the feedback… Chelmsford no probs 🍻🍻
Shall I message you on number ending 9067 for details & price etc.
Such a good video man! 👌 Anyone know if this is the same procedure on a 04 caddy?
Pretty much the same
@@WMCS sweet thanks for the reply, have most of the stuff ordered now and permission to use the workshop at my work, thanks again for the video, no one doing a service like you do where I'm living!
Hi Kevin! Why don't you expand your buisness also to exchanging cam belts. Many car owners who have bought their car second hand, worry about not knowing if earlier owners have done this.
Some say his the modern day stig mechanic
☀️😁
Why drain the gearbox oil and why remove a driveshaft flange? Just curious that's all.
Chris I drain the oil because I need to remove the flange.
Leaving the flange in situ becomes a bit of a problem pulling the gearbox out.
It always seems to anchor itself at the back of the flywheel.
Now it will come out but with a lot of faffing about.
@@WMCS Thanks Kevin for your response. The level of detail in the filming and camera angles showing the necessary steps to complete the work is excellent. Thoroughly enjoy watching your videos. The rubber matting you use makes an excellent work area when working off the cold and wet floor. Atb Chris
100 % 👍
Find myself saying fuck that a lot through your videos mate. gj!
Fancy doing mine 😊westmidlands
Ahoj, ty si kapacita.. Vidno tvoje skúsenosti. Dávaš pozor na detaily. Zodpovedná práca
👏👏👏👏👏👏👏
is good Diabolik
Junge muß der Mann eine Kraft haben. Wer so ein Getriebe mal in der Hand hatte weiß das es nicht das leichteste is.
~♡♡~
Do you really work with this on a daily basis? No torque wrench and no mounting tool for SAC clutch? Wondering how long the clutch lasts?
What's this mounting tool for sac clutch. I've watched a number of clutch changes and only seen the centering tool. If this isn't correct, how come the clutch works at the end
@@dustyfruit946 czcams.com/video/U16ELrPpIdc/video.html
Do you speak?
Someone's done that before
Once or twice 😁🍻
hey
Ты русский?
a force de faire des boites de vitesses vous devait avoir des bras de arnold schwarzenegger !!!
On devine sous son maillot des bras superbement bâtis.
We can guess under his jersey that his arms are solidly built.
Simple job then? 🫣