The presentation was well done, and showing what can be accomplished with less than a full machine shop. As Sandy Mackie has already pointed out, the teflon tape wrap was backwards, and I was always instructed to leave the first thread bare to prevent shearing off a piece of tape that may get under a valve in a large hydraulic or pneumatic component in a customer's plant.
DEAR BROTHER, THANK YOU SO MUCH FOR YOUR EFFORTS. YOUR WORKS ARE REALLY APPRECIABLE. THE PROBLEM IS ,IN INDIA & SUBCONTINENT COUNTRIES, THE SITUATION IS UNPREDICTABLE. NOBODY KNOWS WHAT WILL HAPPEN & HOW LONG IT WILL LAST 🤷♀️🤷♂️ THE BIG ISSUE IS, TO HAVE A LICENSED GUN A LOT OF MONEY (APPROX. 3.5 LAC RUPEE) & GOVERNMENT PERMISSION ARE NEEDED. --& THAT WILL COST A LOT INTERROGATIONS😔 👉THE FACT IS FOR SECURITY WE NEED TO HAVE A POWERFUL AIR GUN.. THEN ,TO BUILD THAT , ONE NEED TO KNOW HOW TO BUILD ALL THE PARTS IN HOME. ABOUT THAT MATTER CAN YOU PLZ . HELP 🙏
I especially like how all the parts used are maybe rated to 300 PSI maximum. And the working pressure of an average PCP gun is 2000-3000 PSI. At least the gun won't go anywhere near any vital body parts.... Wait a minute..... Hmmm. Natural selection at work, I guess. 😂
Hey uh, where did you get that gold washer thing that is beside the rod and the larger drill at 0:21? Also, the drill that you used to make the screw threading at 1:30? the brass washer thing im referring to you make a seal out of at 2:45 also, whats the name of the piece at 2:14?
Good morning, I have been following your channel for a long time. You will have the dimensions of each component to make one of those pistols. I would appreciate it if you would reply. Greetings from Saltillo, Coahuila, Mexico.
He took what he had, thats the sense of this all, of you want a kit then buy a kit, but this is to give ideas for the principal of how it works and you need to think yourself about how to realize that.
nice! this is what I am looking for. But I don't know the name of the materials you use. Is it possible you can specify all materials needed to create a simple qev like on your video? thank you.
And how would I get the bottle to stay pressurized? I'm going to put a schrader valve on one end for the bike pump, and what should I put on the other end?
The presentation was well done, and showing what can be accomplished with less than a full machine shop. As Sandy Mackie has already pointed out, the teflon tape wrap was backwards, and I was always instructed to leave the first thread bare to prevent shearing off a piece of tape that may get under a valve in a large hydraulic or pneumatic component in a customer's plant.
Nnnnn
Ll
6
Excelente vídeo mi amigo. Gracias por compartir tus conocimientos con nosotros. Saludos desde la república del Paraguay.
Dropped everything and sat down to watch this video as soon as I got the notification. This is exactly what I need💪 thanks for uploading bro!
Thank you Duck Norris .Thanks for the support, keep watching
+face off មួយប៉ុនម៉ាននិងលួកខ្ញុំមួយ
@@faceoff2 do you build custom air rifles for people....?
Nice video by the way...👍👍👍
@@faceoff2 where You from Bro?
India?
Thanks man. You diy is great.
Great job bro!
Very interesting
Tnx for creative work
Good job brother
Completed..tqvm
very useful inspiration friend
😎👍🏻
Great work!!! :) bravo!!!
Nice..keep on sharing your ideas new friend here..keep safe god bless
Put the PTFE on the right way and scratch the threads so it doesn’t back off when tightening
My man that was awesome....kool love it. I will be doing this....
That's it! Subscribed!!!
parts list would make many people to subscribe.
very creative idea friends, great 👍🤝😊🙏
And a nother great video 😀
Thanks Kevin
Ótimo vídeo infelizmente no Brasil ninguém encima a fazer uma pcp com esses detalhes que vc ensinou obrigado vou fazer eu mesmo a minha pcp
Obrigado.😊Essa é uma motivação para eu fazer mais,
Nice build, well done. Can you put a parts list please?
Good video i like your video🔥👍🏻
Amazing
Good jobb👍
very professional and clear work , thanks bro
Thank you my dear subscriber😘
Не 99 99 на 9
@@faceoff2 в Москве 9
Не
@@faceoff2 да
Inteligent
Fantastic!
Thank you
Bien hermano!!!!!
nice video
In sabhi samano ka name hame bataenge aap
Good jobb.. 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Its awesome idea but how do we control how much air flow needed .. if just by pressing the trigger i think it would effect accuracy
DEAR BROTHER, THANK YOU SO MUCH FOR YOUR EFFORTS.
YOUR WORKS ARE REALLY APPRECIABLE.
THE PROBLEM IS ,IN INDIA & SUBCONTINENT COUNTRIES, THE SITUATION IS UNPREDICTABLE.
NOBODY KNOWS WHAT WILL HAPPEN & HOW LONG IT WILL LAST 🤷♀️🤷♂️
THE BIG ISSUE IS, TO HAVE A LICENSED GUN A LOT OF MONEY (APPROX. 3.5 LAC RUPEE) & GOVERNMENT PERMISSION ARE NEEDED. --& THAT WILL COST A LOT INTERROGATIONS😔
👉THE FACT IS FOR SECURITY WE NEED TO HAVE A POWERFUL AIR GUN..
THEN ,TO BUILD THAT , ONE NEED TO KNOW HOW TO BUILD ALL THE PARTS IN HOME.
ABOUT THAT MATTER CAN YOU PLZ . HELP 🙏
Thats work better than your lastest vavle version
I especially like how all the parts used are maybe rated to 300 PSI maximum. And the working pressure of an average PCP gun is 2000-3000 PSI.
At least the gun won't go anywhere near any vital body parts.... Wait a minute.....
Hmmm. Natural selection at work, I guess. 😂
Where did u got this idea?? air pneumatic rifles? anyway u r one genius dude. Superbb bro.definitely like n subscribe
Wooow,
Super...!
1 we
I like this much better.
Nice, show
So far, great
good stuff, now make an online store!
May be🤔
Interesting use of basic gear. Some good principles in action. I don't think Daystate need worry though.
nice
Frigging loved it perhaps list every material plus how did you round the bolt?
Put the bolt into a hand drill ,then use a grinder to round the bolt head
How much pressure it can hold Sir?
Красавчик 👍
В обычном порошковом огнетушителе готовый клапан, да ещё и с манометром. Пружинку можно только послабее немного поставить и все!
This is awesome, but do you have a parts list anywhere? It'd be useful to know the size and exact name of all those little pieces
THERE IS NOTHING LIKE THAT. NOT EVEN A CLEAR DEMOSTRATION ON HOW I T BECAUSE IS A FUCKING FAKE!
good
What material did you use?. I want to make one too.👍👍👍👍
Good
Hey bro what is the name of that silver bolts on both sides ? N where can we get that??
what is that 4th part from the left called? Cant find it :(
Tôi đã tìm được kênh của bạn
Tôi hâm mộ bạn
We are talking about 400 bar here, 6 times more than co2 Be careful, lot of stored power.
What do the devices do? And how much does each piece cost?
Nice vid really clever knowledge of easy to reach tools . Music....very very very very bad like depressing bad
can you make a triger mechanism to stop hammer bounce ?
عشت ايدك
You Wrapped the thread tape on to the threads in the wrong direction ! Sandy Mackie
Sandy Mackie true
Thanks for the information.
@@faceoff2 Bhai kya ap isko shell krna chahoge?
The gold waser is where did u get
Hay quá
Can I used spray gun regulator as my valve regulator?
Hi bro...plz trigger tutorial vedio ..
GOOD
Do u give me little information about push rod from where you get that
disk hard drive or cd drive
Can we have the list of materials please? It's will help us a lot!
Please tell me the screws and bolts name and size
itu sekali pompa bisa nembak berapa kali bang. tergantung isi tabung ya. samau coba soalnya
2:02 What do you call the black elbow piece that you put in there i need reply please thank you all!! Godbless
can you give me the list of all materials that you use
how much pressure it can handle?
GOOD JOB 👍
Hi,can i know 6 minutes 10 seconds what is this part, very difficult to search.
Super. ..and clear. ..
Plz ...what's types of pipes use in the barrels. ..
Thank you , it's a brass tube
Ohhh oki bro....how much this gun
Can you please help me with precihole px100 Achilles problem?
Hey uh, where did you get that gold washer thing that is beside the rod and the larger drill at 0:21? Also, the drill that you used to make the screw threading at 1:30? the brass washer thing im referring to you make a seal out of at 2:45 also, whats the name of the piece at 2:14?
I will try to list the part names
Show were to find ur materials dt u used in ds video
Good morning, I have been following your channel for a long time. You will have the dimensions of each component to make one of those pistols. I would appreciate it if you would reply. Greetings from Saltillo, Coahuila, Mexico.
How do u call that black thing which u put on top of valve
Super ? Overall video is good and interesting but you are unable to specify sizes of meterials . yours big fan that's all
Phim.xet.my.hap.dan.nhat
8b 3
The
He took what he had, thats the sense of this all, of you want a kit then buy a kit, but this is to give ideas for the principal of how it works and you need to think yourself about how to realize that.
Ï
nice! this is what I am looking for. But I don't know the name of the materials you use. Is it possible you can specify all materials needed to create a simple qev like on your video? thank you.
What is the size of the drill
If i connected this qev atmosphere to a 3/4 inch pvc, and the pilot to a soda bottle pressurized with a bike pump, would it work?
And how would I get the bottle to stay pressurized? I'm going to put a schrader valve on one end for the bike pump, and what should I put on the other end?
Thait mhah khyrwait lah kum ba khyrwait ia jurong
Itu baut apa yang di buat keluar masuk angin bang
Please do a leakage solution tutorial of Avenger Aventuri Airgun.
Can I use a 1/2" one way valve?
The question is how power full your homemade
If you have a parts list please especially if you're not going to talk or write a description
Where do u get the parts though
This is good but this will not work on 3000 psi or above yes machanism is same
Jos...
What valve are you using?
Great!
Can you tell me the diameter of the hole you made first, please?
What is that black thing on top of valve at 8:34 pls help
Maaf mau Tanya murbaut yang di gunakan dari murbaut apart y'all.........?????
Please tell me the material you used
could you give a list of the parts that you use?
hotballz87 yu tu tu tu
bos bagaimana cara memperbaiki Air gun yg mengalami kebocoran.
อุปกรณ์หาซื้อจากที่ไหนคับ
hii i want to buy this walve... what is the price of this walve... can you sale it
Mntp kwan