Very Beautiful Antique Iron - Restoration ASMR
Vložit
- čas přidán 13. 05. 2024
- Hello everybody!🖐 @TheRestorer is with you again.🔥😎
In this video I will show you the restoration of an extremely beautiful and antique iron. This hand iron is very rare and is made of brass, steel, cast iron and wood. Its entire surface is covered with corrosion, oxide and rust. This rare thing lay for many years without proper care. The iron was found among various junk and scrap metal in the attic of an old house in which the roof was being repaired. This information was told to me by its owner, who sold me the iron. After seeing this rare find, I immediately knew that I could restore it and share this work with you. Therefore, I did not hesitate for a long time and bought it. The complete restoration took me a lot of time and effort. But my efforts were 100% justified. The result of the restoration exceeded my expectations. I didn't think I could restore this antique rusted iron, which must be over 100 years old, to such perfect condition. To be honest, I really liked the end result😊.
Did you like it? Did you expect to see such a transformation Before And After? Also, if anyone knows more information about this antique iron, year of manufacture or origin, then write in the comments. I will be very interested to read and learn more.
I hope you liked the result✨ of the restoration.🙂
Rate my work and efforts in the comments from 1 to 10!😉👍
I am waiting for your Comments, Likes and Subscriptions.
Thanks everyone for watching! See you!🖐
It will be even more interesting later...
🛠️The main tools I work with:
amzn.to/3GEYsXb - Camera Sony ZV-1
amzn.to/3Gqa7so - Microphone RØDE VideoMicro II
amzn.to/3GltQcQ - LED Video Light Kit
amzn.to/46F0vVs - Dremel Rotary Tool Kit with Flex Shaft
amzn.to/47UYplC - Full 408-Piece Tool Set
amzn.to/49RhN4J - Precision Tweezers Set
amzn.to/3RuzvE5 - Set Stainless Steel Precision Micro Probe
amzn.to/48cIjE7 - General Purpose Bench Vise
amzn.to/3SVAjCW - Metal Storage Rack
amzn.to/40W09c1 - Metabo Variable Speed Angle Grinder
amzn.to/3R0iO1N - Metabo Drill/Driver
amzn.to/47FoXrm - Metabo mini Die Grinders
amzn.to/40XmwxG - Metabo Air Compressor
amzn.to/49Yl81H - Benchtop Sandblaster
00:00 Full restoration antique iron
00:37 Surface cleaning of the rusty surface of the iron
01:56 Use of WD-40 on rusty joints
02:39 Disassembly of all parts of the iron
04:28 Preparation of the sandblasting chamber for work
05:25 Surface cleaning with quartz sand under pressure
06:24 Washing the cleaned surface with acetic acid 9%
07:45 Grinding the surface with steel wool
09:04 Grinding irregularities with a file
09:47 I sand the surface with sandpaper of different grits
11:54 Cleaning the cast iron heater with a wire brush
12:36 Polishing brass parts of the iron with paste
13:10 Polishing with finishing polishing paste
14:40 Perfect surface gloss after polishing
15:03 Restoration of the wooden handle of an antique iron
16:42 Making nails for attaching a wooden handle
17:09 All surfaces are restored
17:41 Assembling all restored parts of an old iron
19:07 The result of restoration Before and After
19:36 Perfect restoration result
✅Become a sponsor💎 of this channel and support our work👇
/ @therestorer
✅Support my Patreon 👉 / the_restorer
📧My contacts - therestorer.offers@gmail.com
If you have any questions, ask them in the comments.
I will try to answer everything!)
#restoration #asmr #iron #antique - Zábava
I hope you liked the result✨ of the restoration.🙂
Rate my work and efforts in the comments from 1 to 10!😉👍
I am waiting for your Comments, Likes and Subscriptions.
🥰🥰🥰👍
10!!!
Definitely a 10, was hoping to see a demo of how you use it, got a load of shirts need ironing, can I drop over with them 😅😂😊
Работа с утюгом понравилась, получилось отлично, жаль в конце не показали его функционал. В продолжение темы звуков костра надо было нагреть внутреннюю деталь, положить в утюг и что-нибудь погладить, тогда бы моему восторгу не было бы предела. 😊
After you restore them do you sell them?
I can just imagine how happy and proud the first person was to own this iron. 😊
In ancient times, it was equated to a IPHONE15 )))
I'm sure they were overjoyed to have another tool to allow them to do more housework.
I love that you re-textured every part by sanding it down. Most restoration people just take the rust off then go straight for the re-paint. You ACTUALLY restored it. Nice work. Love to see it.
Its easy to restore when you start with a clean item and then bake fake rust onto Brass...brass does not rust..this guy is a liar.
@@danbusojarnis8262brass forms a patina if left exposed to the wrong chemicals or environment. It is a green rust like appearance on the surface and it is extremely hard to polish out. I have had quite a few brass items in my lifetime and polishing is not my favorite hobby. I also use a safe liquid designed for ammunition reloaders to clean brass cartridges. Pour some of the liquid into a glass bowl and let the brass soak in it for about an hour, keeping watch in case it should start attacking the copper in cheap brass items especially those from India and the orient where the mixture in the metal has impurities. Rinse completely and then proceed with polishing. Iron rust on brass? Don’t know how that would come to be unless soaked in salt water with iron filings for a while, removed to air dry and then repeat the process. Might cause surface rust but I’ve never tried it.
no he did not restore an antique. he destroys one
@@Subgunman green is in brass with lot of copper inside. if copper is litle, brass dont get green
Bunch of haters
Продвинутая модель утюга для своего времени 👌 Внутрь кладутся не угли, а нагретая железяка, и все детальки такие аккуратные, на резьбе. Достойная вещь, получившая новую жизнь 👍
Да. Я тоже так подумала.
Продвинутая система. Очень крутой утюг. И крутой мастер,вернувший ему жизнь🤩
I appreciate all of the great camera angles that you used so we could really see all the intricate work that you did on this amazing piece. Stunning repair work - so intricate and well-thought out.
👍👍👍👍
Thank you, glad you liked my work!👍😉
Just the time alone to set up each shot in detail makes it a fine video. Reminds me of a video class from fifty plus years ago. Having to work with plastiline figures. Pose them, shoot a few frames of film, repose film, repeat until you get your final results. A form of animation from the fifties and sixties. Camera angles were critical so viewers could have a perfect finished product.
@@TheRestorerYoure videos are the best ❤️👊🌟
Очень рада большому количеству просмотров. Значит не все потеряно. Общество в любые времена ценит ручную работу. 🏆🏆🏆
Thank you!👍😉
I don’t know why this so relaxing
Thanks!😉👍
You should have shown how to use the iron after restoration. Does it work properly?
Yes it does, all he needs is to heat the bloc of iron on some ember than put it inside the fer and done
It's just an iron!
It’s an iron how would it not work properly lmfao
@@silvermoon57 I meant how to calculate the correct temperature of the indoor unit so that this iron does not burn through the fabric and does not stick to it.
@@Mikhail_1979 Здравствуйте, берут ткань хлопковую мокрую ( нужно каждый раз смачивать не должна быть сухой) она выступает в роли прокладки между утюгом и тем изделием которое Вы собираетесь гладить.
I confess that I found the prismatic rust coloring to be quite beautiful
I restored a brass iron identicle to this one in 1973! It's one of my favorite antiques. Nice restorationl
It’s beautiful. Love the design of the iron, so simple yet so elegantly effective
Thanks!👍 Where are you watching from?🌍😉
So beautiful. Very impressive.
Какие красивые , изящные и простые в употреблении вещи умели изготавливать наши пра-пра-пра-прадеды. Они мастерили на сотни лет.
👍😉
Обожаю такие видео. Залипательные неимоверно.
Молодец,мужчина. Как говорится сделано с душой!
🤩👍💯🔥😍
Thank you!😉👍
Beautiful. So glad you didn't sand it all the way down and some of the pitting was still visible. I'd rather have that than losing too much of the original. It looks so good. Fantastic
Thank you very much!)👍😉
Glad you liked it!
You are amazing. Very impressive skill.
Thanks!👍 Where are you watching from?🌍😉
@@TheRestorerI am from Vancouver, Canada 🇨🇦
Это настоящее волшебство! Мастер !✨🎆✨
Thank you!👍😉💚
Жаль из хохлолэнда
My granny had a few of these. She used them as door stops. She taught me how they were used.
All that "rust" and no pitting. Amazing
Yes and it’s funny how often all these badly rusted items suddenly appear from nowhere!! There must be a barn full of them somewhere! 😜
It really depends on the type of metal, whether there's pitting. Also, there are indeed barns full of old, rusty stuff. It's items kept in good condition that are difficult to find...
Specaly on Brass, i like the before and after effect. very decorativ. 👍👍👍👍👍But i dont think, it is old. It seams to be a replica from the seventies. Old screws, over hundred years had not six sides, only four. The is also no sign the handle was used very offen. It looked new, but aged. In the seventies, brass objects for decoration bekame popular and there was a lot importet from India. Just like the bag in the last video.
Thank you!👍😉
I remember my grandmother had one of these. She didn’t use it anymore, but it was still in beautiful condition. You did a wonderful job with this iron!! Another 10 from Texas!
Удивительно, где Вы такие шедевры добываете... Наблюдение за процессом восстановления просто завораживает!
у нас в сельской местности на металлоприемку чего только не несут...заехал к одному сдать обрезки проводов после монтажа, а там у него целая коллекция антиквариата
Это правда
Gorgeous!
Muito mais que um ferro de passar roupas, uma linda peça de decoração 😍
Thanks 👍😉
You are off the scale!❤ I love watching you restore things! The iron looks amazing❤
Thank you very much!)👍😉
This guy DOES NOT RESTORE ANYTHING... HE TAKES A CLEAN ITEM AND COOKS SUGAR AND DIRT ONTO IT, HE DOESNT EVEN HAVE TO CLEAN IT BECAUSE HE JUST SHIWS WHAT IT LOOKED LIKE. EFOR HE COVERED IT IN FAKE RUST.. ALL HIS ITEMS ARE faked.
Calificación 10, es impresionante la restauración.
Es una belleza de plancha. ❤
Этот утюг сегодня выглядит так круто, как не выглядел наверное в день своей продажи более ста лет назад! 👍
Beautiful!
Thanks!👍 Where are you watching from?😉
Incrível ,maravilhoso!
Завараживающее зрелище! Увидела обложку, где до и после, захотелось посмотреть как это было сделано. Спасибо, очень качественно снято.
Thank you!👍😉
Хорошая работа! На скорости 1.5 смотрится норм.
Успехов!!!
😉👍
You made a superb job of a beautiful iron. Your filming is first-class, too.
Поздравляю с приобретением пескоструя )
🛠👍😉
Amazing work! Beautiful restoration!!
the result is awsome, but, i prefer old. love pieces that show the pass of the time. Congrats, amazing work by the way.
Thank You! It is so beautiful how you truly restore these art works. For you are true artist. They do not make any thing the way they used to, they were build to last once upon a time. One LOVE
This guy is a liar. He fakes the dirt and rust and . I can't stand people who make this fake crap.. brass cannot rust.
BEAUTIFUL !!
Thank you!👍😉💚
Прекрасная работа. У мастера золотые руки. Видео смотришь как релакс. Антикварной вещи подарил вторую жизнь.
Thank you!👍
Вы волшебник! Восхитительное преображение!!!
Simplesmente maravilhoso, excelente trabalho. Parabéns!!
Thanks👍😉
Респект за такую реставрацию утюга, работа кропотливая, как здорово что есть такие мастера. Здорово👏✊👍 Удачи вам, мастер!!
Thanks!😉👍
Oh WOW! Absolutely fantastic. Just like new. Greetings from southern Alberta.
Thank you!👍 Canada is a beautiful country!✨
What restoration would you like to see in the future?🙂
I live out on the prairie, but 80 miles to the west are the Rockies and Waterton National Park which is paired with Montana's Glacier Park. Then there's Banff west of Calgary. It's very cool to see rail trips through the Rockies as prizes on The Price is Right and Wheel of Fortune. Future projects? Oh man, I have no idea off hand. I still can't believe how nice this old iron turned out. WOW! I've always been interested in seeing items restored or preserved that were brought up from the Titanic.@@TheRestorer
That turned out incredible!!! Well done! 👍
Thanks!👍😉
He is a liar. His videos are all fake. Brass cannot rust.. look at all his videos, real craftsman call him out. He is full of shyte
The fire crackle at end was divine!!!!!!
Отличная работа 😊
Thank you!👍😉
I love your videos! Thank you it really calms and relaxes me and pulls me away from the world in a peaceful way. Thank you (: God bless you
Ummm… I have no words for that! Your channel should be called, ‘The Miracle Worker’. Wow… that is gorgeous! You’re simply amazing. Another realm.
Beyond a 10! Absolutely stunning!!!
Thank you very much!)👍😉
😮 Just amazing. So beautiful.
Thank you very much!)👍😉
Que mas puedo agregar que no te hayan dicho....? Tremendo trabajo. Excelentes tomas. Sonido que complementa a la perfección la intención.
Золотые руки! Загляденье!
Thanks!👍
Another great video, love the angles 👍
Thank you!👍😉
Absolutely beautiful ❤
I might as well subscribe and binge all the previous content.
Subscribe! I will be glad to see you as my subscriber! Where are you watching from?🌍😉
Magnífico, bello trabajo caballero
Thanks👍😉
I say only WOW 😮❤
Absolutely stunning! 👏👏👏
👍😉💚
Przepiękne jest to bardzo stare zabytkowe żelasko pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍
Thank you very much!)👍😉
Wow, what a beauty!
Thanks!👍😉💚
A really great job hard to believe it is the same iron it is absolutely beautiful.
Похоже, вы сделали его ещё лучше, чем он был изначально! Браво!
Thanks👍😉
10.5 You did that. 👍
Thank you!👍😉
I am sure that when was brand new didn’t looks so good like now. Excellent job!
Dati necemu sansu za novi zivot!!👍
👍😉
Fantastic!
Hello! Thank you!👍😉
Where are you watching from?🌍😉
That restoration of the iron exceeded my idea of how the finished look. Amazing. Keep it up.
Thank you!👍😉
STUNNING!!!!
Wow! Great video! A pleasure to watch)))) Bravo to the master!!!👍👏👏👏
Thank you!👍😉
@@TheRestorer 👍👍👍👍Good luck to the channel!!!
Me encantan tus vídeos es hermoso todo lo que haces :)
Good work ❤
This is an amazing restoration. The iron is so beautiful and the cherry stain tops it off wonderfully. Thankyou for sharing.
Thank you, glad you liked my work!👍😉
He is a fraud. Brass cannot rust. He actually ruins these items and edits the sequence..
Absolutely beautiful restoration and craftsmanship ❤️ 👏 Bravo!
I have a question. The bump on the side that you removed - was that not a 7? And if so, was it not meant to be there? I just know that a lot of metalwork has markings for the craftsman or like, serial numbers. So I was just curious
Excuse me? This is a machine through magic! Thanks for sharing.
Thanks!👍 Where are you watching from?🌍😉
@@TheRestorer U.K 👑
Well done! Impressive to see come back to I think even better than the day it was bought!
Thanks!😉👍
10/10 👍🏽great job!
Thank you!👍😉
Incredible workmanship, great job, Beautiful result❤
Thank you!👍😉
Absolutely gorgeous!
What a beautiful restoration.👏
Espectacular tu trabajo, Felicitaciones!!!👏👍
He is a fake. Fraud. Liar.
Eu Deus que maravilha de Arte! !👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍☝👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thanks!😉👍
Es maravilloso el trabajo que haces 😊
Thank you!👍😉
Beautiful work! Thanks for sharing!
Thanks!💚👍😉
I bet that iron didn't look that good even when it was new! Wonderful job!
Thanks!👍 Where are you watching from?🌍😉
Columbus New Jersey, USA
Espetacular 👋👋👋👋👍
Ficou top das galáxias 👍
Thanks!👍😉
Amazing as usual
Thanks👍😉
Nice restoral.
Thank you!👍😉
This is so relaxing
All of these old conveniences are always something to hold. So many of them heavy with the steel they were made from. They felt better even if todays conveniences are lighter and more efficient. Define a 10.
He is a liar. He takes clean items and makes them look dirty with fake rust...brass cannot rust... all real craftsmen call him out, he could even be ruining these items and editing the film so the before becomes the after.
10 It looks to beautiful to use. 😊
Beautiful restoration, truly a labor of love, you have the cleanest shop I have ever seen 👍 oh and the cleanest Metabo tools 🧰
Thanks!👍 Where are you watching from?🌍😉
So, so, so satisfying and cool to watch.
Thank you!👍😉
The level of skill you demonstrated for us here is superb!! You are a highly talented restorer!! I really enjoyed this video. I am a new subscriber and I did leave my “like”.
Amazing to see something so wrecked become beautiful again ❤
Thanks!👍 Where are you watching from?🌍😉
Just gorgeous😊😊😊
Beautiful work my great grandmother had one like that.
Thanks!😉👍
It is fantastic to watch you work and see how the materials come back to beautiful life!! Incredible job. 10/10 😃
Hello! Thank you!👍😉
Where are you watching from?🌍😉
Manitoba, Canada :)@@TheRestorer
Quel résultat inattendu ! Très beau travail. La perfection.
👍. Great Work.
Thank you!😉👍💚
Золотой утюг! Он явно никогда не был столь красив)